- 09 7月, 2017 12 次提交
-
-
由 Christophe Leroy 提交于
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
At the same time, move to Kconfig Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
For processors whose core runs at twice the bus frequency, the fallback frequency calculation in Linux provides a wrong result. Therefore, U-boot needs to pass the correct value. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Acked-by: NWolfgang Denk <wd@denx.de> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
immap.c used to be common to several CPUs. It is now only linked to the 8xx, so this patch moves it into arch/powerpc/cpu/mpc8xx/ Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Christophe Leroy 提交于
CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c3 ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
- 07 7月, 2017 20 次提交
-
-
由 Enric Balletbo i Serra 提交于
On startup the SL50 board halt at U-Boot prompt. Use CONFIG_AUTOBOOT_KEYED to enable autoboot for this board and define the <SPACE> key to get the U-Boot prompt. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Hannes Schmelzer 提交于
since commit 'd5abcf94' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brppt1 board is broken, with this commit we make our board working again. Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
-
由 Andy Shevchenko 提交于
There is no need to duplicate same option with different name. Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Andy Shevchenko 提交于
Fix spelling Resettting -> Resetting. No functional change intended. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Andy Shevchenko 提交于
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Simon Glass 提交于
The current code gives a warning: arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init': arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++) ^ arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Fix it by moving the declaration to the top of the function. Signed-off-by: NSimon Glass <sjg@chromium.org> Series-cc trini
-
由 Holger Brunck 提交于
The 82xx board mgcoge3ne was removed from the codebase, so this is dead code. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 xypron.glpk@gmx.de 提交于
The Odroid C2 comes with several expansion options such as an RTC module. As these expansions are not considered in the Linux device tree they have to be enabled via device tree overlays. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Baruch Siach 提交于
Since commit 5b9d44df (mkimage: Display a better list of available image types) mkimage usage text suggest to "use -T to see a list of available image types". Unfortunately, commit 02221f29deb8 (mkimage: Convert to use getopt()) broke that feature, because getopt() fails when -T has no option argument. Add a pseudo image type name 'list' that lists all image types. Update the usage text accordingly. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
-
由 Peter Robinson 提交于
CHIP and CHIP Pro devices have options of DIP addon boards some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
由 Peter Robinson 提交于
96boards CE devices such as the DragonBoard and Hikey devices have numerous mezzanine options some of which need overlays from the beginning so it makes sense to enable device tree overlays. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
由 Peter Robinson 提交于
TI am33xx devices such as the BeagleBone devices have numerous cape options such as screens some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
由 Peter Robinson 提交于
Raspberry Pi has numerous HAT and other HW expansion options such as screens and cameras some of which need overlays from the beginning so it makes sense to enable evice tree overlays. Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
-
由 Rob Clark 提交于
This actually works on snapdragon.. not sure why we weren't using it. Fixes reboot/poweroff when using UEFI. Signed-off-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NAlexander Graf <agraf@suse.de>
-
由 Ladislav Michl 提交于
Implement spl_start_uboot to let Falcon mode work. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Ladislav Michl 提交于
Fastmap significantly reduces flash scan time, enable it by default. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Ladislav Michl 提交于
Fastmap was always enabled in ubispl, make it selectable by CONFIG_MTD_UBI_FASTMAP. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Martin Böh 提交于
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 04 7月, 2017 7 次提交
-
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for efi - 2017-07-04 Highlights this time: bugfixes. With these changes, OpenBSD should be more happy.
-
由 xypron.glpk@gmx.de 提交于
If a relocation type is not supported loading the EFI binary should be aborted. Writing a message only is insufficient. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: use a() != b coding style] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The efi-next tree lives on github, not the usual denx git. Reflect this in the MAINTAINERS file so that people can find it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
UEFI spec 2.7 indicates that HandleProtocol can be implemented by calling OpenProtocol with attributes = EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL. Currently we pass attributes = 0 to efi_open_protocol. 0 is not a valid value when calling OpenProtocol. This does not cause any errors yet because our implementation of OpenProtocol is incomplete. We should pass the correct value to enable a fully compliant implementation of OpenProtocol in the future. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
driver is not used anymore, so remove it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 03 7月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
These are locally used in lib/efi_loader/efi_boottime.c Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-