- 09 12月, 2009 1 次提交
-
-
由 Heiko Schocher 提交于
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 11 10月, 2009 1 次提交
-
-
由 Luigi 'Comio' Mantellini 提交于
Signed-off-by: NLuigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 23 9月, 2009 1 次提交
-
-
由 Peter Tyser 提交于
Remove board-specific #ifdefs for calling phy_reset() during initializtion Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 21 7月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
We have always mapped at least 16M in the kernel and we have seen cases with new kernel features that a kernel image needs more than 8M of memory. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 31 3月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 18 2月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
The CONFIG_CMD_ENV option controls enablement of the `saveenv` command rather than a generic "env" command, or anything else related to the environment. So, let's make sure the define is named accordingly. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 24 1月, 2009 4 次提交
-
-
由 Kumar Gala 提交于
Introduce a new define to seperate out the virtual address that PCI IO space is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
Introduce a new define to seperate out the virtual address that PCI memory is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead of _IO_BASE so we are more explicit. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead of _MEM_BASE so we are more explicit. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NAndy Fleming <afleming@freescale.com>
-
- 14 12月, 2008 1 次提交
-
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 04 12月, 2008 1 次提交
-
-
由 Jon Loeliger 提交于
Prevent further viral propogation of the unused symbol CONFIG_L1_INIT_RAM by just removing it. Signed-off-by: NJon Loeliger <jdl@freescale.com> Acked-by: NAndy Fleming <afleming@freescale.com>
-
- 02 12月, 2008 1 次提交
-
-
由 Jon Loeliger 提交于
Prevent further viral propogation of the unused symbol CONFIG_L1_INIT_RAM by just removing it. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 25 10月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Fleming-AFLEMING <afleming@freescale.com>
-
- 19 10月, 2008 2 次提交
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 11 9月, 2008 3 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 28 8月, 2008 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 13 8月, 2008 1 次提交
-
-
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 15 7月, 2008 1 次提交
-
-
由 Andy Fleming 提交于
This was proposed by Paul Gortmaker in response to Wolfgang's comments on similar #defines in sbc8560.h. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 11 6月, 2008 3 次提交
-
-
由 Kumar Gala 提交于
Make it so we keep track of which LAWs have allocated and provide a function (set_next_law) which can allocate a LAW for us if one is free. In the future we will move to doing more "dynamic" LAW allocation since the majority of users dont really care about what LAW number they are at. Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
A number of board ports have empty version of board_early_init_f for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Remove unused and unconfigured DDR test code from FSL 85xx boards. Besides, other common code exists. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 21 5月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 27 3月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 17 1月, 2008 3 次提交
-
-
由 Kumar Gala 提交于
Now that all boards have been converted, remove old config code and the config option for the new style. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 1月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 12月, 2007 3 次提交
-
-
由 Kumar Gala 提交于
* Enabled CONFIG_CMD_ELF Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Removed some misc environment setup * Enabled CONFIG_CMDLINE_EDITING Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Updated the MPC8560 ADS config to use libfdt and assume use of aliases for ethernet, pci, and serial for the various fixups that are done. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 29 8月, 2007 1 次提交
-
-
由 Kim Phillips 提交于
and make some minor corrections to the FDT part of the README. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 17 8月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 16 8月, 2007 1 次提交
-
-
由 Andy Fleming 提交于
The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 12 7月, 2007 2 次提交
-
-
由 Andy Fleming 提交于
Made the boot commands use device trees by default. Also moved the ramdisk to 1000000 (I think the previous address was getting overridden during boot). Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Andy Fleming 提交于
* Adds code to modify CPM frequencies * Cleans up the config file to #define TSEC and (for now) #undef FCC * Adds the MII command for all 8560 ADS configurations * Updates config file to provide convenience commands for booting with a device tree Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 10 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-