There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.
Signed-off-by: NHeiko Schocher <hs@denx.de>

u-boot updates, before starting Linux, the memory node in the
DTS. As this is a "standard" feature, move this functionality
to the cpu.c file for mpc5xxx and mpc512x processors.
Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Previously MAKEALL would always return a value of 0, even if 1 or more
boards did not compile.  This change causes MAKEALL to return 0 if all
boards were able to build, otherwise 1.

This change also requires changing the script interpreter from sh to
bash to support bash's PIPESTATUS variable.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Recent commits 1a99de2c and
6a590c5f both fixed the same bug in the
same manner.  Unfortunately git was "smart" enough to merge both changes
which resulted in some duplicate code.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Reordered code and comment a bit.
Signed-off-by: NWolfgang Denk <wd@denx.de>

commit bd3784df deleted some unused
code in do_i2c_mw(), but missed to also remove the respective
commment. This patch fixes this.
Signed-off-by: NHeiko Schocher <hs@denx.de>

add the following commands for the manroland boards:

CONFIG_CMDLINE_EDITING
CONFIG_COMMAND_HISTORY
CONFIG_AUTO_COMPLETE
Signed-off-by: NHeiko Schocher <hs@denx.de>

Conflicts:
	lib_generic/zlib.c
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch introduces a weak default function for post_hotkey_pressed(),
returning 0, for boards without hotkey support. The long-running tests
won't be started on those boards. This default function was implemented
in many board directories. By implementing this weak default we can
remove all those duplicate versions.

Boards with hotkey support, can override this weak default function
by defining one in their board specific code.
Signed-off-by: NStefan Roese <sr@denx.de>

To update the real memory size in the memory node on the
uc101 and mucmc52 boards call fdt_fixup_memory() in
ft_board_setup().
Signed-off-by: NHeiko Schocher <hs@denx.de>

Depending on offset, flash size and the number of bad blocks,
get_len_incl_bad may return a too small value which may lead to:

1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
bad block aware read/write code. This may hurt performance, but does
not have any adverse effects.

2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
the bad block unaware read/write code (if len_incl_bad == *length)
which leads to corrupted data.
Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>

- NfsTimeout() does not correctly update the NFS timeout value which
  results in NfsTimeout() only being called once in certain situations.
  This can result in the 'nfs' command hanging indefinetly.  For
  example, the command:

    nfs 192.168.0.1:/home/user/file

  will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
  NFS server running.

  This issue is resolved by reinitializting the NFS timeout value inside
  NfsTimeout() when a timeout occurs.

- Make the 'nfs' command print the 'T' character when a timeout occurs.
  Previously there was no indication that timeouts were occuring.

- Mimic the 'tftpboot' command and when a download fails print "Retry
  count exceeded; starting again", and restart the download taking the
  'netretry' environment variable into account.
Signed-off-by: NEvan Samanas <esamanas@xes-inc.com>
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Tested on TQM8xxL.

Tested by: Wolfgang Denk <wd@denx.de>

Tested on MPC8527DS.

Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>

The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
sub-commands in the wrong order which resulted in the error below when
following the 'help' command's instructions:

  "Trying to execute a command out of order"
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

"nandecc" help output should not reproduce the command name, nor have
a trailing newline.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Since commit 736fead8 "Convert SMC911X
Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
README to reflect that change.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>

An off by one error may cause nfs readlink lookup fail if
nfs_path_buff has non-zero data from a previous use.

Loading: *** ERROR: File lookup fail
Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Commit dce3d797 updated the zlib code to v0.95; this caused
conflicts when building for the "cradle" board, because the (pretty
generic) preprocessor variable "OFF" was used in multiple files.
Make sure to avoid further conflicts by #undef'ing it in zlib.c
before redefining it.
Signed-off-by: NWolfgang Denk <wd@denx.de>
cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
cc: Angelo Castello <angelo.castello@st.com>
cc: Alessandro Rubini <rubini-list@gnudd.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Conflicts:
	board/esd/plu405/plu405.c
	drivers/rtc/ftrtc010.c
Signed-off-by: NWolfgang Denk <wd@denx.de>

The Linux kernel build system changed how it compresses things with LZMA
such that the header no longer contains the filesize (it is instead set to
all F's).  So if we get a LZMA image that has -1 for the 64bit field,
let's just assume that the decompressed size is unknown and continue on.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Two later additions to the Configuration Option section unfortunately
split the description of Show boot progress and the list of its call outs.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

This patch optimizes the direct copy procedure.
Uses get_unaligned() but only in one place.
The copy loop just above this one can also use this
optimization, but I havn't done so as I have not tested if it
is a win there too.
On my MPC8321 this is about 17% faster on my JFFS2 root FS
than the original. No speed test has been performed in u-boot.

Size increase on ppc: 484 bytes
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>

Add lzop decompression support to the existing lzo bitstream handling
(think gzip versus zlib), and support it for uImage decompression if
CONFIG_LZO is enabled.

Lzop doesn't compress as good as gzip (~10% worse), but decompression
is very fast (~0.7s faster here on a slow ppc). The lzop decompression
code is based on Albin Tonnerre's recent ARM Linux lzo support patch.

Cc: albin.tonnerre@free-electrons.com
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>

Previously, there was no indication to the user that a FIT image was
successfully created after executing mkimage.  For example:

  $ mkimage -f uImage.its uImage.itb
  DTC: dts->dtb  on file "uImage.its"

Adding some additional output after creating a FIT image lets the user
know exactly what is contained in their image, eg:

  $ mkimage -f uImage.its uImage.itb
  DTC: dts->dtb  on file "uImage.its"
  FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
  Created:         Tue Nov 24 15:43:01 2009
   Image 0 (kernel@1)
    Description:  Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
    Type:         Kernel Image
    Compression:  gzip compressed
    Data Size:    2707311 Bytes = 2643.86 kB = 2.58 MB
    Architecture: PowerPC
    OS:           Linux
    Load Address: 0x00000000
    Entry Point:  0x00000000
    Hash algo:    crc32
    Hash value:   efe0798b
    Hash algo:    sha1
    Hash value:   ecafba8c95684f2c8fec67e33c41ec88df1534d7
   Image 1 (fdt@1)
    Description:  Flattened Device Tree blob
    Type:         Flat Device Tree
    Compression:  uncompressed
    Data Size:    12288 Bytes = 12.00 kB = 0.01 MB
    Architecture: PowerPC
    Hash algo:    crc32
    Hash value:   a5cab676
    Hash algo:    sha1
    Hash value:   168722b13e305283cfd6603dfe8248cc329adea6
   Default Configuration: 'config@1'
   Configuration 0 (config@1)
    Description:  Default Linux kernel
    Kernel:       kernel@1
    FDT:          fdt@1

This brings the behavior of creating a FIT image in line with creating a
standard uImage, which also prints out the uImage contents after
creation.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

The FIT fit_set_header() function was copied from the standard uImage's
image_set_header() function during mkimage reorganization.  However, the
fit_set_header() function is not used since FIT images use a standard
device tree blob header.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

When building a Flattened Image Tree (FIT) the image type needs to be
"flat_dt".  Commit 89a4d6b1 introduced a
regression which caused the user to need to specify the "-T flat_dt"
parameter on the command line when building a FIT image.  The "-T
flat_dt" parameter should not be needed and is at odds with the current
FIT image documentation.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.

This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().
Signed-off-by: NIngo van Lil <inguin@gmx.de>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

In preperation for full relocation
Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>

Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>