- 09 12月, 2009 1 次提交
-
-
由 Heiko Schocher 提交于
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 23 9月, 2009 1 次提交
-
-
由 Marcel Ziswiler 提交于
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@noser.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NHeiko Schocher <hs@denx.de>
-
- 18 7月, 2009 1 次提交
-
-
由 Wolfgang Denk 提交于
Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 28 4月, 2009 1 次提交
-
-
由 Heiko Schocher 提交于
because legacy NAND support is deprecated converting to current NAND interface. !This just compile, because I have no more the hardware to test it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 24 1月, 2009 1 次提交
-
-
由 Wolfgang Grandegger 提交于
This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 19 10月, 2008 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 11 9月, 2008 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 13 8月, 2008 2 次提交
-
-
rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 03 3月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 04 11月, 2007 1 次提交
-
-
由 Sergej Stepanov 提交于
To get the IDS8247 board working following are done: - FCC2 is deactivated - FCC1 is activated - I2C is activated - CFI driver is activated - Adapted for use with LIBFDT Signed-off-by: NSergej Stepanov <Sergej.Stepanov@ids.de> --
-
- 10 7月, 2007 3 次提交
-
-
由 Jon Loeliger 提交于
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Jon Loeliger 提交于
Mostly removed from comments here. Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 09 7月, 2007 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
- 09 4月, 2006 1 次提交
-
-
由 Marian Balakowicz 提交于
Some more NAND cleanup and small fixes.
-
- 21 11月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
-
- 23 7月, 2005 1 次提交
-
-
由 Jon Loeliger 提交于
- Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
-
- 13 5月, 2005 1 次提交
-
-
由 wdenk 提交于
* Add support for MPC8247 based "IDS8247" board.
-
- 28 6月, 2003 1 次提交
-
-
由 wdenk 提交于
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
-
- 22 6月, 2003 1 次提交
-
-
由 wdenk 提交于
(0xf5000000, to be specific). The reason is that the RTC first gets accessed before MMU is initialized and, consequently, it needs to be placed at physical addresses which are later mapped to the same virtual addresses (like 0xf5000000 physical is mapped to 0xf5000000 virtual).
-
- 19 6月, 2003 1 次提交
-
-
由 wdenk 提交于
-
- 23 5月, 2003 1 次提交
-
-
由 wdenk 提交于
Fix problem with only partially cleared .bss segment * Patch by Rune Torgersen, 12 May 2003: get PCI to work on a MPC8266ADS board; incorporate change to cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
-
- 18 5月, 2003 1 次提交
-
-
由 wdenk 提交于
(includes support for Intel 82365 and compatible PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers)
-
- 12 5月, 2003 1 次提交
-
-
由 wdenk 提交于
-
- 06 5月, 2003 1 次提交
-
-
由 wdenk 提交于
-
- 03 5月, 2003 1 次提交
-
-
由 wdenk 提交于
* Patch by Keith Outwater, 28 Apr 2003: - Miscellaneous corrections and additions to GEN860T board specific code. - Added GEN860_SC variant to GEN860T. - Miscellaneous corrections to GEN860T documentation. - Correct duplicate entry in U-Boot CREDITS file. - Add GEN860T_SC entry in MAINTAINERS file. - Update CREDITS file with GEN860T_SC info. * Update Smiths Aerospace addresses in MAINTAINERS file * Fix error handling in hush's version of "run" command
-
- 26 3月, 2003 3 次提交
- 12 3月, 2003 1 次提交
-
-
由 wdenk 提交于
- 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
-
- 18 1月, 2003 1 次提交
-
-
由 wdenk 提交于
* Add support for LXT971 PHY on PM826 * Patch by Tord Andersson, 16 Jan 2003: Fix flash sector count for TQM8xxL * Fix I2C EEPROM problem on ICU862 board (would only write the first 16 bytes out of each 32 byte block)
-
- 17 12月, 2002 1 次提交
-
-
由 wdenk 提交于
Add i2c commands to PM826 config * extend I2C POST code: check for list on known addresses
-
- 19 8月, 2002 1 次提交
-
-
由 wdenk 提交于
-