- 28 1月, 2017 2 次提交
-
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>
-
- 26 1月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 24 1月, 2017 1 次提交
-
-
由 Tom Rini 提交于
This option should not really be user selectable. Note that on PowerPC we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be conditional on that. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
-
- 22 1月, 2017 1 次提交
-
-
由 Jagan Teki 提交于
Cc: Tom Rini <trini@konsulko.com> Signed-off-by: NJagan Teki <jagan@openedev.com>
-
- 30 12月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 12月, 2016 2 次提交
-
-
由 Breno Lima 提交于
UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: NBreno Lima <breno.lima@nxp.com>
-
由 Breno Lima 提交于
It's not necessary to define the processor in the defconfig file. The preferred method to select the SoC is via Kconfig file. Signed-off-by: NBreno Lima <breno.lima@nxp.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 29 11月, 2016 1 次提交
-
-
由 Breno Lima 提交于
UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi <francesco.monte@gmail.com>: https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: NBreno Lima <breno.lima@nxp.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 17 9月, 2016 10 次提交
-
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing uses. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 17 6月, 2016 1 次提交
-
-
由 Tom Rini 提交于
With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 3月, 2016 1 次提交
-
-
由 Simon Glass 提交于
Move this option to Kconfig and tidy up existing boards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 19 11月, 2015 1 次提交
-
-
由 Thomas Chou 提交于
Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 28 9月, 2015 1 次提交
-
-
由 Bin Meng 提交于
Some boards' defconfigs are disordered. Reorder them. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 02 9月, 2015 2 次提交
-
-
由 Peng Fan 提交于
Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig. Add enable "CONFIG_ARCH_MX6" for boards based on mx6. Then we can choose target boards using "make ARCH=arm menuconfig" with ARCH_MX6 defined. If using original way, we have no chance to enable ARCH_MX6 when "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig, kconfig will complains "arch/../configs/platinum_titanium_defconfig:3: warning: override: TARGET_PLATINUM_TITANIUM changes choice state" Signed-off-by: NPeng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Bénard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Marek Vasut <marex@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Soeren Moch <smoch@web.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: NStefano Babic <sbabic@denx.de> Acked-by: NSoeren Moch <smoch@web.de> Acked-by: NOtavio Salvador <otavio@ossystems.com.br> Acked-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 vpeter4 提交于
Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: NPeter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: NStefano Babic <sbabic@denx.de> Signed-off-by: NPeter Vicman <peter.vicman@gmail.com> Acked-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 26 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 6月, 2015 2 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 27 4月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
Cubox-i and Hummingboard support several MX6 SoCs: mx6solo, mx6dual-lite, mx6dual and mx6quad. Use IOMUX_PADS() macro in order to prepare for the multi-SoC support. Also pass 'MX6QDL' in the defconfig to indicate it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 22 4月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
Add the initial SPL support for HummingBoard-i2eX, which is based on a MX6 Dual. For more information about HummingBoard, please check: http://www.solid-run.com/products/hummingboard/ Based on the work from Jon Nettleton and Rabeeh Khoury. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 19 4月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 16 3月, 2015 1 次提交
-
-
由 Masahiro Yamada 提交于
Since commit e02ee254 (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 19 2月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Use Kconfig instead of board config for DM and DM_THERMAL. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Peng Fan 提交于
Add a SPL default configuration file for mx6sxsabresd board. Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
-
- 20 11月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
Many boards use a minimal .cfg file in the SPL case. Introduce spl_sd.cfg so that we can reuse it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 09 9月, 2014 1 次提交
-
-
由 Nikita Kiryanov 提交于
Add initial support for Compulab CM-FX6 CoM. Support includes MMC, SPI flash, and SPL with dynamic DRAM detection. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-