- 24 7月, 2018 29 次提交
-
-
由 Adam Ford 提交于
The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
The previous e-mail pointing to Vaibhav Hiremath <hvaibhav@ti.com> is bouncing and has for some time. This updates it to myself and I work for Logic PD the manufacturer of the AM3517-SOM and EVM Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Heinrich Schuchardt 提交于
Symbol CONFIG_SPL_RELOC_STACK_SIZE is not used anywhere. So remove it. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Breno Lima 提交于
Currently the U-Boot project contains 2 documentation directories: - doc/ - Documentation/ The Documentation directory only contains device tree bindings related content, so move the 3 files to doc/device-tree-bindings/. Signed-off-by: NBreno Lima <breno.lima@nxp.com>
-
由 Michal Simek 提交于
There is no reason not to use macros which are already defined. It is also much easier for grepping. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Guillaume GARDET 提交于
commit d233ccb1 ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Paulo Zaneti 提交于
Header file "asm/utils.h" is not required to compile "spl_ymodem.c". So, removing this dependency allows other architectures to use this booting device as "asm/utils.h" is only present in "arm" architecture. Signed-off-by: NPaulo Zaneti <paulo.zaneti@datacom.ind.br>
-
The length returned by hexport_r has a few redundant characters. This appears as NULL characters at the end so seems harmless. Remove the surplus counts in two places totlen += strlen(ep->key) + 2; I'm guessing the +2 here is for = and sep char. But there is another totlen += 2; line that does that. size = totletn + 1; Doesn't make sense and isn't justified with any comment. Signed-off-by: NZubair Lutfullah Kakakhel <zubair@resin.io>
-
由 Igor Opaniuk 提交于
Use blk_dread()/blk_dwrite() in mmc_read()/mmc_write() AVB operation implementations. This fixes compilation issues when CONFIG_BLK is enabled. Signed-off-by: NIgor Opaniuk <igor.opaniuk@linaro.org> Tested-by: NEugeniu Rosca <rosca.eugeniu@gmail.com>
-
由 Igor Opaniuk 提交于
1. Since libavb library alone is highly portable, introduce dedicated Kconfig symbol for AVB bootloader-dependent operations, so it's possible to build libavb separately. AVB bootloader-dependent operations include: * Helpers to process strings in order to build OS bootargs. * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c. * Helpers to alloc/init/free avb ops. 2. Add CONFIG_FASTBOOT dependency, as fastboot buffer is re-used in partition verification operations. Reported-by: NEugeniu Rosca <rosca.eugeniu@gmail.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: NEugeniu Rosca <rosca.eugeniu@gmail.com> Tested-by: NEugeniu Rosca <rosca.eugeniu@gmail.com>
-
由 Kay Potthoff 提交于
In the case that there was no name defined for a partition the code assumes that name_len is 22 and therefore allocates exactly that space for a dummy name. But the function sprintf() first resolves "0x%08llx@0x%08llx" to a string that is longer than 22 bytes. This leads to a buffer overflow. The replacement function snprintf() limits the copied bytes to name_len and therefore avoids the buffer overflow. Signed-off-by: NKay Potthoff <Kay.Potthoff@microsys.de>
-
由 Patrice Chotard 提交于
With recent kernel v4.18-rcx, uImage becomes bigger than 8MB. Set SYS_BOOTM_LEN to 16MB, this fix the following error message: "Fix Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN" Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Miquel Raynal 提交于
A comment in the kernel doc of the mtd_oob_ops structure tells that it is not possible to write more than one page with OOB. This was probably true at some time in the past but today it is entirely wrong. As one can see for instance in the nand_do_write_ops() helper available in the NAND core, this implementation called by mtd->_write_oob() simply loops over the pages until everything has been written. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
-
由 AKASHI Takahiro 提交于
rtc_to_tm() and rtc_mktime() are required for some RTC drivers, at least PL031. Without this patch, we also need to enable CONFIG_CMD_DATE even if we don't want or need this command. Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Rafał Miłecki 提交于
Our nand_ecc_modes_t is already a bit abused by value NAND_ECC_SOFT_BCH. This enum should store ECC mode only and putting algorithm details there is a bad idea. It would result in too many values impossible to support in a sane way. To solve this problem let's add a new enum. We'll have to modify all drivers to set it properly but once it's done it'll be possible to drop NAND_ECC_SOFT_BCH. That will result in a cleaner design and more possibilities like setting ECC algorithm for hardware ECC mode. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: b0fcd8ab7b3c89b5da7fff5224d06ed73e7a33cc] [Philippe Reynes: adapt code to u-boot] Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>
-
由 Adam Ford 提交于
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_DA8XX_GPIO Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
In order to use the device tree for MMC, the card-detect pin needs to be inverted. This patch places this into the am3517-evm-u-boot.dtsi file to keep the main DTS and DTSI files clean and in-sync with Linux Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
With the resync of the omap3.dtsi file, the reg-shift was removed so it breaks the UART. Adding the reg-shift into the am3517-evm-u-boot.dtsi keeps the reg-shift for U-Boot, but keeps the dts/dtsi files clean from Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Mario Six 提交于
The Linux kernel moved to sphinx-based documentation and got rid of the DocBook based documentation quite a while ago. Hence, the DocBook documentation for U-Boot should be converted as well. To achieve this, import the necessary files from Linux v4.17, and convert the current DocBook documentation (three files altogether) to sphinx/reStructuredText. For now, all old DocBook documentation was merged into a single handbook, tentatively named "U-Boot Hacker Manual". For some source files, the documentation style was changed to comply with kernel-doc; no functional changes were applied. Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Adam Ford 提交于
There have been some significant changes to the DM37 SOM-LV device tree. This patch re-syncs it with Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
There have been some refactoring of the DTS files for the Logic PD DM37 Torpedo. This patch re-sync's the DTS files with Linux Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
There have been several minor changes to the OMAP3.dtsi, so this patch re-syncs it with Linux. An addition include/dt-binding was also brought with it. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
Several changes have been made to the AM3517-evm and the underlying am3517.dtsi file. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Tom Rini 提交于
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Christophe Kerello 提交于
This patch solves quad read issue with Macronix/Micron spi nor. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Christophe Kerello 提交于
This patch assigns the functional operation mode in _stm32_qspi_gen_ccr function. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Heinrich Schuchardt 提交于
Assigning a parameter which is not used afterwards has not effect. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
git://git.denx.de/u-boot-imx由 Tom Rini 提交于
trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 7月, 2018 11 次提交
-
-
由 Adam Ford 提交于
There are already definitions for ramdisk_addr_r and fdt_addr_r, so having a duplicate copy called ramdiskaddr and fdtaddr is confusing. This patch converts any references to ramdisk_addr_r and fdt_addr_r and removes the duplicates. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Martin Kaiser 提交于
The USBOH module on imx25 chips contains two USB controllers which are called USB OTG Controller and USB Host Controller. Each one has its EHCI root hub. The OTG Controller's EHCI registers start at offset 0, the Host Controller's registers start at offset 0x400. We set CONFIG_MXC_USB_PORT=0 to select the OTG Controller and 1 for the Host Controller. Therefore, IMX_USB_PORT_OFFSET must be 0x400. Using this setting, the Host Controller starts working on my imx25 board. Please note that the imx25 reference manual claims that the Host Controller's registers start at 0x200. This is not correct. The Linux Kernel uses the correct offset 0x400 in imx25.dtsi. Signed-off-by: NMartin Kaiser <martin@kaiser.cx> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Holger Dengler 提交于
Signing parts of a u-boot imximage for image verification in High Assurance Boot (HAB) in a post-build process, requires some information from the imximage header. Currently, this information is only provided during the image build, which makes the transfer of this information to the post-build process harder than necessary. The i.MX HAB information (start and length) can be calculated either by using information from the image-configuration file, or from the information in the flash header of the imximage. The advantage of using information from flash header is, that they are not only available during image creation, but also available if existing images are processed. Example: $ tools/mkimage -l u-boot.imx Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 483328 Bytes = 472.00 KiB = 0.46 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00071c00 DCD Blocks: 0x00910000 0x0000002c 0x00000208 Signed-off-by: NHolger Dengler <dengler@linutronix.de> Tested-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org>
-
由 Ludwig Zenz 提交于
In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Adam Ford 提交于
Since the vast majority of i.MX6 boards are migrating to SPL, this patch converts im6q_logic to SPL and enables the SDP for loading SPL and u-boot.img over USB. The Falcon mode only supports NAND flash as of now due to limited space/RAM, but all i.MX6D/Q SOM's from Logic PD have internal NAND from which to boot. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ludwig Zenz 提交于
Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit bus width Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Ludwig Zenz 提交于
Preperation for conditional DDR3 initialization based on GPIO codes. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Ludwig Zenz 提交于
This reverts commit a637fe6f. The DDR DRAM calibration was enhanced by write leveling correction code. It can be used with T-topology now. Signed-off-by: NLudwig Zenz <lzenz@dh-electronics.de>
-
由 Otavio Salvador 提交于
The new config skips the boot menu which asks which board is in use. This is useful to allow direct booting of image without user iteration. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
Our default config already has the secure mode supported, so the manual step is not required anymore. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Otavio Salvador 提交于
The DFU allows a more user friendly use as the details where the bootloader is installed are abstracted. Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
-