- 04 10月, 2017 2 次提交
-
-
由 Maxime Ripard 提交于
The USB Ethernet gadget option has not yet been moved to Kconfig, let's deal with that. Reviewed-by: NŁukasz Majewski <lukma@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Maxime Ripard 提交于
While the USB Ethernet device address is already defined in Kconfig, the host address isn't. Convert it. Reviewed-by: NŁukasz Majewski <lukma@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 03 10月, 2017 2 次提交
-
-
由 Tom Rini 提交于
For better test coverage, enable btrfs. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Marek Behún 提交于
Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
- 01 10月, 2017 4 次提交
-
-
由 Philipp Tomsich 提交于
The RK3399-Q7 requires DM regulator support in SPL, so we can use the regulator framework to reenable the eMMC and SPI, if these had been turned of by the BIOS_DISABLE signal. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Elaine Zhang 提交于
Add defconfig for rk8xx and regulator and i2c controller. Signed-off-by: NElaine Zhang <zhangqing@rock-chips.com> Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Jagan Teki 提交于
Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
Remove a duplicate CONFIG_ENV_IS_IN_MMC assignment for the lion-rk3368 defconfig. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 30 9月, 2017 4 次提交
-
-
由 Andrew F. Davis 提交于
Add a new defconfig file for the AM335x High Security EVM. This config is specific for the case of UART booting Signed-off-by: NAndrew F. Davis <afd@ti.com>
-
由 Adam Ford 提交于
With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: NAdam Ford <aford173@gmail.com> Tested-by: NDerald D. Woods <woods.technical@gmail.com>
-
由 Tom Rini 提交于
On ARCH_OMAP2PLUS platforms we know what the DDR layout is going to be, and that it is safe to use SPL_STACK_R and provide a default value for it. select this and re-sync the defconfigs. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
With DM now enabled with the device tree pulled from Linux, we can enable DM_I2C in U-Boot. Reviewed-by: NJagan Teki <jagan@openedev.com> Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Add DM_I2C_COMPAT to da850_am18xxevm to fix warning] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 9月, 2017 2 次提交
-
-
由 Adam Ford 提交于
There is a discrepency between U-Boot and Linux on the partition map. This enabes the MTD parts to pass MTD partition information from U-Boot to Linux. Linux already has a pending patch to enable MTD PARTS in davinci_all_defconfig Reviewed-by: NJagan Teki <jagan@openedev.com> Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
With the device tree ported and DM compatible drivers, enable: OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL Note: DM_SERIAL is not enabled for da850evm_direct_nor_defconfig yet. Reviewed-by: NJagan Teki <jagan@openedev.com> Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 27 9月, 2017 1 次提交
-
-
由 Bin Meng 提交于
The choice of "USB keyboard polling" cannot be optional as without one mechanism being set, it just doesn't work. Set the default one to CONFIG_SYS_USB_EVENT_POLL. Fixes: ecad7051 ("configs: Migrate all of the existing USB symbols, except fastboot") Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 26 9月, 2017 2 次提交
-
-
由 Stefan Roese 提交于
Currently, we support 2 "theadorable" MVEBU build targets. One with a stripped down configuration (theadorable) and one with a full blown configuration (theadorable_debug), including PCI, ethernet etc. When we introduced these configs, the plan was to remove the debug version at some point. But now it seems better to keep the full-blown version and remove the "non-debug" version instead. At a later stage, I will rename the remaining "theadorable_debug" target into a more fitting one. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Chris Packham 提交于
This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 23 9月, 2017 3 次提交
-
-
由 Frank Kunz 提交于
For EFI boot GPT partition table support is needed as well as the part command and also the SPL needs to fallback to other boot methods after parse the SPL header. Signed-off-by: NFrank Kunz <mailinglists@kunz-im-inter.net>
-
由 Yangbo Lu 提交于
PPA loading during SPL stage is not required for nornal SD boot scenario. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Yangbo Lu 提交于
PPA loading during SPL stage is not required for nornal SD boot scenario. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 22 9月, 2017 2 次提交
-
-
由 Patrice Chotard 提交于
This patch adds support for stm32h7 soc family, stm32h743 discovery and evaluation boards. For more information about STM32H7 series, please visit: http://www.st.com/en/microcontrollers/stm32h7-series.htmlSigned-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 21 9月, 2017 1 次提交
-
-
由 rick 提交于
Add spi dts node and enable spi dm flash config. Signed-off-by: Nrick <rick@andestech.com>
-
- 20 9月, 2017 1 次提交
-
-
由 Fabio Estevam 提交于
Add Serial Download Protocol support (SDP), which allows loading SPL and u-boot.img via imx_usb_loader tool as explained in doc/README.sdp. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
- 19 9月, 2017 5 次提交
-
-
由 Philipp Tomsich 提交于
With the critical drivers ready for switching to a live tree, we can now enable it in the defconfig for the RK3399-Q7. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Andy Yan 提交于
Add the missing target and pinctrl config for rk3368 sheep board Signed-off-by: NAndy Yan <andy.yan@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Jagan Teki 提交于
This patch adds support for Vyasa RK3288 initial board from Amarula Solutions. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Philipp Tomsich 提交于
This adds OF_LIVE and BOOTSTAGE support for the RK3368-uQ7 and regenerates the defconfig (picking up a few changes/reorderings) from upstream Kconfig changes. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 William Wu 提交于
This patch adds USB configs to support the USB OTG port(consist of DWC2 controller) and the USB Host port(consist of EHCI and OHCI controllers) on evb-rv1108 board, and also support fastboot over USB and USB mass storage. Signed-off-by: NWilliam Wu <william.wu@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
- 18 9月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
The main difference between Pro4 and PXs2/LD6b is the Denali NAND IP version. This is now distinguished by DT. Merge the two defconfig files into uniphier_v7_defconfig. Update the README.uniphier too. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 16 9月, 2017 3 次提交
-
-
由 Simon Glass 提交于
Enable this option for link so that the timer is available earlier. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
The CONFIG_BOOTSTAGE_USER_COUNT option is no-longer needed since we can now support any number of user IDs. Also BOOTSTAGE_ID_COUNT is not needed now. Drop these unused options. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
This adds support to Intel Cherry Hill board, a board based on Intel Braswell SoC. The following devices are validated: - serial port as the serial console - on-board Realtek 8169 ethernet controller - SATA AHCI controller - EMMC/SDHC controller - USB 3.0 xHCI controller - PCIe x1 slot with a graphics card - ICH SPI controller with an 8MB Macronix SPI flash - Integrated graphics device as the video console Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 15 9月, 2017 4 次提交
-
-
由 Pantelis Antoniou 提交于
Add unit tests for sandbox default config. Signed-off-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Alison Chaiken 提交于
Add unit tests for the 'gpt rename' and 'gpt swap' commands that rely on the block device created by test/py/make_test_disk.py. Add CONFIG_CMD_GPT_RENAME to the sandbox_defconfig. Remove the testdisk.raw test device at the end of the tests. Signed-off-by: NAlison Chaiken <alison@peloton-tech.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Wenyou Yang 提交于
To remove the assignment of CONFIG_SYS_EXTRA_OPTIONS option, which is deprecated, use the CONFIG_XXXX_BOOT options to indicate the boot media, and the SoC is selected by the board. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Wenyou Yang 提交于
The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 13 9月, 2017 3 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_EMIF4 CONFIG_SDRC Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_MAC_ADDR_IN_SPIFLASH CONFIG_MAC_ADDR_IN_EEPROM Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
Either the USB and Fastboot were never finished, or somehow it got lost. This puts enough hooks back into omap3logic to enable fastboot and hopefully prepare it for Kconfig conversion. Signed-off-by: NAdam Ford <aford173@gmail.com>
-