- 24 4月, 2018 9 次提交
-
-
由 Heinrich Schuchardt 提交于
The missing services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL are implemented. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Device paths may consist of multiple instances. Up to now we have only considered the size of the first instance. For the services of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL in most cases the total length of the device path is relevant. So let's rename efi_dp_size() to efi_dp_instance_size() and create a new function efi_dp_size() that calculates the total device path length. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
efi_dp_size() is meant to return the device path length without the end node. The length of a device path containing only an end node was incorrectly reported as 4. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The logic of the AppendDevicePath service of the EFI_DEVICE_PATH_UTILITIES_PROTOCOL is incorrectly implemented: * if both paths are NULL an end node has to be returned * if both paths are not NULL the end node of the second device path has to be kept Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Implement the CreateDeviceNode service of the device path utility protocol. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
%s/provice/provide/ Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Executing a test after failed setup may lead to unexpected behavior like an illegal memory access. So after a setup failure we should skip to teardown. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
We do not support bootefi booting ARMv7 in non-secure mode. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
According to the documentation the EFI log category is called LOGC_EFI. All other categories start with LOGC_. So let's fix it. Fixes: 1973b381 ("log: add category LOGC_EFI") Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 22 4月, 2018 11 次提交
-
-
-
-
由 Neil Armstrong 提交于
The disabled clk API returns -ENOSYS unlike the reset API returning -ENOTSUPP. Fixes: ca7fdc8b ("usb: host: Add simple of glue driver for DWC3 USB Controllers integration") Reported-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Jean-Jacques Hiblot 提交于
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB is enabled. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Jean-Jacques Hiblot 提交于
This simple glue layer does not require CONFIG_MISC, but it does require CONFIG_DM_USB. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Marek Vasut 提交于
The E2 Silk port was broken since some time. This patch updates the E2 Silk port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The port is missing support for I2C1 for DA9063 reset, since the I2C driver needs to be converted to DM and DT probing. That's not an issue for this patch though, since the reset was broken on Silk since forever.
-
由 Marek Vasut 提交于
Migrate the U-Boot configs to Kconfig CONFIG_SH_MMCIF . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Marek Vasut 提交于
Add Kconfig entry for SH MMCIF driver. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Marek Vasut 提交于
Add MMC DM and DT probing support into the SH MMCIF driver. This patch abstracts out the common bits of the send command and set ios functions, so they can be used both by DM and non DM setups and adds the DM probe support. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Marek Vasut 提交于
The initconst is not used in U-Boot, drop it. The r8a7794_crit_mod_clks is also not used in U-Boot, so drop it too. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The initconst is not used in U-Boot, drop it. The r8a7792_crit_mod_clks is also not used in U-Boot, so drop it too. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 19 4月, 2018 2 次提交
-
-
- 18 4月, 2018 14 次提交
-
-
由 Kunihiko Hayashi 提交于
Add reset lines for ethernet controller on each SoC. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Add clock control for ethernet controller on each SoC. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
-
git://git.denx.de/u-boot-arc由 Tom Rini 提交于
Subtle ARC fixes for v2018.05-RC3 These are only very subtle clean-ups here and there including: * Correctly specified CPU freq for HSDK (production boards are all shipped with 500MHZ as opposed to early batch running at 1GHz) * Addition of SNPS internal group email to MAINTAINERS file * Switch to Hush shell on AXS10x boards
-
由 Neil Armstrong 提交于
In the commit "reset: Add get/assert/deassert/release for bulk of reset signals" the disabled reset_release_bulk() and reset_get_bulk() used the wrong struct clk_bulk instead of struct reset_ctl_bulk. Fixes: 0c282339 ("reset: Add get/assert/deassert/release for bulk of reset signals") Reported-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Bryan O'Donoghue 提交于
commit b4d956f6 ("bootm: Align cache flush end address correctly") aligns the end address of the cache flush operation to a cache-line size to ensure lower-layers in the code accept the range provided and flush. A similar action should be taken for the begin address of a cache flush operation. The load address may not be aligned to a cache-line boundary, so ensure the passed address is aligned. Signed-off-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org> Reported-by: NBreno Matheus Lima <brenomatheus@gmail.com> Suggested-by: NTom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: NBreno Lima <breno.lima@nxp.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Neil Armstrong 提交于
This fixes the Coverity Defect CID 175347 when dev_count_phandle_with_args() returns a negative value. Fixes: a855be87 ("clk: Add get/enable/disable/release for a bulk of clocks") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
This fixes the Coverity Defect CID 175348 when dev_count_phandle_with_args() returns a negative value. Fixes: 0c282339 ("reset: Add get/assert/deassert/release for bulk of reset signals") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Marek Vasut 提交于
The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Eugeniy Paltsev 提交于
"Global data" structure "gd" is not used in init_helpers.c thus DECLARE_GLOBAL_DATA_PTR might be safely removed. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Eugeniy Paltsev 提交于
CPU on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk_defconfig. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
- 17 4月, 2018 4 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Dinh Nguyen 提交于
None of the SoCFPGA platforms will support EFI/ISO partition types that is needed for DISTRO_DEFAULTS. SoCFPGA bootroom will only support 0xa2 partition type. This is needed to help limit the size of the SPL to within the 64k limit that is required for SoCFPGA. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-
由 Dinh Nguyen 提交于
Add the DM reset driver to socfpga defconfigs. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
-