- 26 12月, 2019 6 次提交
-
-
由 Alex Marginean 提交于
Hardware comes out of reset with implicit values, but these are outside the accepted range for Layerscape gen 3 chassis spec used on LS1028A. Allocate different IDs and fix up Linux DT to use them. Signed-off-by: NAlex Marginean <alexandru.marginean@nxp.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Vabhav Sharma 提交于
LX2160A PL011 UART driver fetch IP block values using platform data from board file instead of device tree. Modified UART nodes in device tree to disable state. Signed-off-by: NVabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
USB3.0 Receiver needs to enable fixed equalization for each of PHY instances in an SOC. This is similar to erratum A-009007, but this one is for LX2160A, and the register value is different. Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Mark board_fit_config_name_match() as weak so a board can overwrite the empty function. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Udit Agarwal 提交于
Maximum size of secure boot header to be read from MMC is 12KB which spans across 0x20 blocks. Hence increase the mmc read size for secure boot headers from MMC to 0x20 blocks. Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Florinel Iordache 提交于
Add support for DPSPARSER object (create/destroy, open/close, apply spb) which is required to configure Soft Parser by using MC. Also add uboot command to apply Soft Parser Blob with command: fsl_mc apply spb <spb_load_addr> Signed-off-by: NFlorinel Iordache <florinel.iordache@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 24 12月, 2019 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx由 Tom Rini 提交于
- Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards
-
- 23 12月, 2019 25 次提交
-
-
由 Holger Brunck 提交于
This is the first step to use DM support for the KM powerpc boards. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com> CC: Mario Six <mario.six@gdsys.cc> CC: Wolfgang Denk <wd@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Priyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Ran Wang 提交于
Signed-off-by: NRan Wang <ran.wang_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Joakim Tjernlund 提交于
Some of t1042 boards fails DDR init with an Automatic calibration error every now and then. Investigations revealed that true Warm boots never failed. Warm boots has some extra steps performed, one being to start DDRC in Self Refresh and then clearing SR right after. Applying this SR method unconditionally made all our boards stable again, regardless of Cold/Warm boot. Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Holger Brunck 提交于
CONFIG_CONS_INDEX is nowhere used for this board, we can drop it. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com> CC: Priyanka Jain <priyanka.jain@nxp.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
-
由 Holger Brunck 提交于
We can use the existing CONFIG_SYS_CONFIG_NAME define for that and remove the option. Also fix the boot string for all km83xx boards. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com> CC: Priyanka Jain <priyanka.jain@nxp.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
-
由 Holger Brunck 提交于
Remove this from the board header files and move it to Kconfig. Also use the correct default address for kmtegr1. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com> CC: Priyanka Jain <priyanka.jain@nxp.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
-
由 Holger Brunck 提交于
On kmtegr1 we have to specify the second localbus clock signal also instead of using the default for our ppc 8309 boards. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com> CC: Priyanka Jain <priyanka.jain@nxp.com> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
-
- 18 12月, 2019 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral
-
- 17 12月, 2019 6 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-i2c由 Tom Rini 提交于
i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it.
-
由 Robert Beckett 提交于
Add ability to query size of eeprom device and partitions Signed-off-by: NRobert Beckett <bob.beckett@collabora.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Robert Beckett 提交于
Add ability to partition eeprom via devicetree bindings Signed-off-by: NRobert Beckett <bob.beckett@collabora.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Robert Beckett 提交于
Add support for setting the chip address offset mask to EEPROM sumulator and add tests to test it. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Robert Beckett 提交于
Improve i2c EEPROM simulator testing by providing access functions to check the previous chip addr and offset. Given that we can now directly test the offsets, also simplified the offset mapping and allow for wrapping acceses. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Robert Beckett 提交于
Some devices (2 wire eeproms for example) use some bits from the chip address to represent the high bits of the offset instead of or as well as using multiple bytes for the offset, effectively stealing chip addresses on the bus. Add a chip offset mask that can be set for any i2c chip which gets filled with the offset overflow during offset setup. Signed-off-by: NRobert Beckett <bob.beckett@collabora.com> Signed-off-by: NIan Ray <ian.ray@ge.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 15 12月, 2019 1 次提交
-
-
由 Simon Glass 提交于
Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-