- 20 3月, 2018 23 次提交
-
-
由 Bryan O'Donoghue 提交于
This patch adds code to lib to enable sharing of useful OPTEE code between board-ports and architectures. The code on lib/optee/optee.c comes from the TI omap2 port. Eventually the OMAP2 code will be patched to include the shared code. The intention here is to add more useful OPTEE specific code as more functionality gets added. Signed-off-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Harinarayan Bhatta <harinarayan@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Peng Fan <peng.fan@nxp.com> Tested-by: NPeng Fan <peng.fan@nxp.com>
-
由 Stefan Roese 提交于
ppc4xx support was removed some time ago. Lets remove the now unused entry in MAINTAINERS as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Stefan Roese 提交于
ppc4xx support was removed some time ago. Lets remove the now unused "pci_fb" variable from "struct pci_controller" as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
-
由 Stefan Roese 提交于
ppc4xx support was removed some time ago. Lets remove the now unused NAND driver and all its references for this platform as well. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Scott Wood <oss@buserror.net>
-
由 Patrick Delaunay 提交于
Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add minimal devicetree for STM32MP157C-ED1 board, with only the devices to allow boot from SDCARD: - RCC for clock and reset - UART4 for console - I2C and PMIC - DDR - SDMMC0 for SDCard Waiting Kernel upstream for alignment. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
add binding and code for clock tree initialization from device tree Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
add RCC clock driver for STMP32MP157 - base on driver model = UCLASS_CLK - support ops to enable, disable and get rate of all SOC clock needed by U-Boot Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
- move to livetree and allow to get address to parent - add stm32mp1 compatible for probe Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
- add the 2 new compatible used by STM32MP157 "st,stm32mp157-pinctrl" "st,stm32mp157-z-pinctrl" - update the mask for the port Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
This driver implements register read/write operations for STPMU1. The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. It is accessed via an I2C interface. This device is used with STM32MP1 SoCs. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Kmalloc is using memalign allocation function. It is not necessary to align this structure so to save bytes, we move to calloc. And kmalloc function can't be used in SPL early stage (in board_init_f()) Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Update the GPIO driver to support a live device tree. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
The current value timer_rate_hz causes a problem with function timer_get_us() from lib time and then an issue with readx_poll_timeout() function. With corrected value for tbclk() = timer_rate_hz = CONFIG_SYS_HZ_CLOCK the weak functions in lib timer can be used: - get_timer() - __udelay() So the specific function in this file are removed. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
STM32MP157 bootrom needs a specific header for first boot stage. This patch adds support of this header in mkimage. Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Alex Kiernan 提交于
If the U-Boot environment is stored in a regular file and redundant operation isn't set, then write to a temporary file and perform an atomic rename. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Alex Kiernan 提交于
Extract write path of flash_io() into a separate function. This patch should be a functional no-op. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NStefano Babic <sbabic@denx.de>
-
由 Alex Kiernan 提交于
Replace HaveRedundEnv with have_redund_env to fix style violation. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Alex Kiernan 提交于
Pass tools/env/fw_env.c through indent to correct style violations. This commit consists of only one non-whitespace change: tools/env/fw_env.c:549: error: do not use assignment in if condition Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
- 19 3月, 2018 15 次提交
-
-
由 Jun Nie 提交于
U-boot proper signature is not verified by SPL on most platforms even config SPL_FIT_SIGNATURE is enabled. Only fsl-layerscape platform support secure boot in platform specific code. So verified boot cannot be achieved if u-boot proper is loaded by SPL. This patch add signature verification to u-boot proper images when loading FIT image in SPL. It is tested on Allwinner bananapi zero board with H2+ SoC. Signed-off-by: NJun Nie <jun.nie@linaro.org>
-
-
由 yannick fertre 提交于
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Support several pixel format (8bits, 16bits, 24bits & 32bits). Add new file st_logo_data.h which contains logo stmicroelectronics_uboot_logo_8bit_rle.bmp. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Enable the display controller, panel & backlight. Set panel display timings & set the RGB data bus. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 Philippe CORNU 提交于
Add display controller node in device-tree. Signed-off-by: Nyannick fertre <yannick.fertre@st.com> [agust: rebased on master] Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 yannick fertre 提交于
Set the blending factor regarding the pixel format Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Set LIPCR (line interrupt position conf) register with line length. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
pxclk is useless to set pixel clock. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Modified copyright & driver name. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 yannick fertre 提交于
Add reset of LTDC display controller. Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
-
由 Heinrich Schuchardt 提交于
No need to initialize variables if the next usage is an assignment. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
If an event does not occur the current coding stays in an endless loop. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Eliminate (x2 - x2) which is always zero. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
(A || !A && B) == (A || B) Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 17 3月, 2018 2 次提交
-
-
由 Patrick Delaunay 提交于
Merge init_helpers.h in the new file init.h with only prototypes for init_cache_f_r used in common/board_f.c Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Patrick Delaunay 提交于
Move function prototype for common/init/board_init.c from common.h to init.h Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-