- 11 4月, 2011 1 次提交
-
-
由 Shaohui Xie 提交于
PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as 1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from CPC after PBL completes RCW and PBI phases. Signed-off-by: NChunhe Lan <b25806@freescale.com> Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: NShaohui Xie <b21989@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 4月, 2011 1 次提交
-
-
由 Kumar Gala 提交于
We don't really ever use Video cards on corenet_ds style boards and its bloating our image which is close the its max size. Drop support and also kill some defines for non-PNP PCI which we never use. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 04 4月, 2011 1 次提交
-
-
由 Haiying Wang 提交于
There are some differences between CoreNet (P2040, P3041, P5020, P4080) and and non-CoreNet (P1017, P1023) based SoCs in what features exist and the memory maps. * Rename various immap defines to remove _CORENET_ if they are shared * Added P1023/P1017 specific memory offsets * Only setup LIODNs or LIODN related code on CORENET based SoCs (features doesn't exist on P1023/P1017) Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 20 1月, 2011 3 次提交
-
-
由 York Sun 提交于
ECC can be turned on/off by hwconfig without recompiling. So enable it by default. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Add new headers that capture common defines for a given SoC/processor rather than duplicating that information in board config.h and random other places. Eventually this should be handled by Kconfig & defconfigs Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
Rather than defining it config.mk we can set it in config.h and remove config.mk from several boards that don't need it. We mimic what 4xx does and introduce CONFIG_RESET_VECTOR_ADDRESS for config.h to set. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NWolfgang Denk <wd@denx.de>
-
- 14 1月, 2011 3 次提交
-
-
由 Kumar Gala 提交于
CONFIG_SYS_BOOTMAPSZ has been 16M on these boards for some time so we should also allow the kernel image to be up to 16M decompressed. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Moved the SRIO init out of corenet_ds and into common code for 8xxx/QorIQ processors that have SRIO. We mimic what we do with PCIe controllers for SRIO. We utilize the fact that SRIO is over serdes to determine if its configured or not and thus can setup the LAWs needed for it dynamically. We additionally update the device tree (to remove the SRIO nodes) if the board doesn't have SRIO enabled. Introduced the following standard defines for board config.h: CONFIG_SYS_SRIO - Chip has SRIO or not CONFIG_SRIO1 - Board has SRIO 1 port available CONFIG_SRIO2 - Board has SRIO 2 port available (where 'n' is the port #) CONFIG_SYS_SRIOn_MEM_VIRT - virtual address in u-boot CONFIG_SYS_SRIOn_MEM_PHYS - physical address (for law setup) CONFIG_SYS_SRIOn_MEM_SIZE - size of window (for law setup) [ These mimic what we have for PCI and PCIe controllers ] Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Kumar Gala 提交于
Instead of a #define use a null weak function for fsl_serdes_init Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 11月, 2010 3 次提交
-
-
由 Kumar Gala 提交于
We appear to have different refclk's on the different corenet DS boards so move the define out of the common header. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
CONFIG_SYS_TEXT_BASE setting is common across the 'corenet_ds' board family so move it out of P4080DS.h and into corenet_ds.h Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 27 10月, 2010 2 次提交
-
-
由 Wolfgang Denk 提交于
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 10月, 2010 1 次提交
-
-
由 Kumar Gala 提交于
The recent change the env code added an additional 32 bytes into gd_t and that causes to grow pass the previous CONFIG_SYS_GBL_DATA_SIZE size. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 20 10月, 2010 2 次提交
-
-
由 York Sun 提交于
800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 York Sun 提交于
Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 10月, 2010 2 次提交
-
-
由 Peter Tyser 提交于
Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Wolfgang Denk 提交于
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 07 10月, 2010 2 次提交
-
-
由 Kumar Gala 提交于
We configure the controller but dont have virtual address space thus any devices on the 4th controller are not accessible in u-boot. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Emil Medve 提交于
* Make the U-Boot update command sequence conditional. Helps prevent accidental erasing if an upload or previous step fails * Make it easier to update other FLASH banks * Enable DDR controller cache line interleaving and bank cs0/cs1 by default Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 9月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
Coding style cleanup. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 19 8月, 2010 1 次提交
-
-
由 york 提交于
The board specific parameters associated with quad rank dimms where missing. This fixes it so the board will function if quad rank dimms are placed in it. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 02 8月, 2010 1 次提交
-
-
由 Kumar Gala 提交于
Add support for the P4080DS board, with the following features: * 36-bit only * Boots from NOR flash * FMAN drivers NOT supported * SPD DDR initialization Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NAshish Kalra <Ashish.Kalra@freescale.com> Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NLan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-