This patch adds support for the T3CORP board, based on the
AppliedMicro (APM) PPC460GT.
Signed-off-by: NStefan Roese <sr@denx.de>

Since I haven't been actively maintaining these boards for a long while,
keeping myself as their maintainer makes no sense.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>

This patch adds support for the LaCie ED Mini V2 product
which is based on the Marvell Orion5x SoC.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>

This patch adds support for the Samsung Goni board (S5PC110 SoC)
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Provides initial support for TI OMAP-L138/DA850 SoC devices on
a Logic PD EVM board.

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: NBen Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This patch adds basic support for the AM3517EVM.
It includes:
	- Board files (.c and .h)
	- Default configuration file
	- Updates for Makefile
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals.  This patch adds support for the
TNETV107X EVM board.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This patch adds basic support for the AM3517EVM.
It includes:
	- Board files (.c and .h)
	- Default configuration file
	- Updates for Makefile
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals.  This patch adds support for the
TNETV107X EVM board.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401

The board is made as SODIMM200 module.
For more info www.ronatix.at or info@ronetix.at.
Signed-off-by: NAsen Dimov <dimov@ronetix.at>

The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot

References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org

This patch is for GuruPlug Plus, but it supports Standard version
as well.
Signed-off-by: NSiddarth Gore <gores@marvell.com>

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h
Signed-off-by: NHeiko Schocher <hs@denx.de>

This patch adds support for the Mosaix Technologies, Inc. ICON board,
based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM
(512MB standard) and 64MByte of NOR FLASH.

Support for the onboard SM502 will be added later.
Signed-off-by: NStefan Roese <sr@denx.de>

This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot

A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.

The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
Signed-off-by: NMichael Weiss <michael.weiss@ifm.com>
Signed-off-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>

A low cost 4 port IP-PBX board.
Signed-off-by: NBrent Kandetzki <BrentK@teleco.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>

Signed-off-by: NVipin Kumar <vipin.kumar@st.com>

This patch adds support for ASTRO board(s) based on MCF5373L.
Signed-off-by: NWolfgang Wegner <w.wegner@astro-kom.de>

We do not support a processor that never reached a real customer.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.
Signed-off-by: NDetlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>

Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common config options
are collected in include/configs/km_arm.h. Also, this board
use common code for all keymile boards, which is stored in
board/keymile/common/common.c
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NHeiko Schocher <hs@denx.de>

This is an i.MX25 base board with only NAND
so it uses nand_spl to boot.
Signed-off-by: NJohn Rigby <jcrigby@gmail.com>

Tune configuration, add support for (redundant) environment in NAND.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Acked-by: NWolfgang Denk <wd@denx.de>
CC: Fred Fan <fanyefeng@gmail.com>
CC: Tom <Tom.Rix@windriver.com>

The patch adds initial support for the Freescale mx51evk board.
Network (FEC) and SD controller (fsl_esdhc) are supported.
Signed-off-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NFred Fan <fanyefeng@gmail.com>

* new board (eb_cpux9k2)
 * support for EB+CPUx9K2 board by BuS Elektronik GmbH & Co. KG
 * select via make eb_cpux9k2_config
 * this also demonstrates, how to use boards with AT91RM9200 cpu
   in at91 arch tree
Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>

Added support for the following EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A
Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net>

This patch adds support for esd gmbh OTC570 board.
The OTC570 is based on an Atmel AT91SAM9263 SoC.
Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>

The EXBITGEN board has not been maintained for a long time; it has
build problems, but no hardware is available any more for testing.

Drop support for this board.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Acked-by: NStefan Roese <sr@denx.de>

Signed-off-by: NAlessandro Rubini <rubini@unipv.it>

Signed-off-by: NHarald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The new board revision has a different LCD.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NValentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The caddy2 is a variant of the already supported vme8349. So we just
add the differences to this board port. To better support those two
boards we switched from fixed SDRAM configuration to usage of
spd_sdram(). This is done by providing a board specific SPD EEPROM
routine with different values for both boards.
Signed-off-by: NReinhard Arlt <reinhard.arlt@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

changed to use mkconfig -t option instead, plus misc codingstyle fixes.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Becky Bruce <beckyb@kernel.crashing.org>

This patch adds support for A320 evaluation board from Faraday. This board
uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM.
FA526 is an ARMv4 processor and uses the ARM920T source in this patch.
Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>

Integrate DA830 EVM support into U-Boot.

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum
Digital EVM board. See http://www.spectrumdigital.com/Signed-off-by: NNick Thompson <nick.thompson@gefanuc.com>

This patch adds support for the board IPEK01 based on the MPC5200.
The Futjitsu Lime graphics controller is configured in 16 bpp mode.
Signed-off-by: NWolfgang Grandegger <wg@denx.de>

Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
	Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
	3 UARTs and expanded 4 UART ports + IrDA
	Ethernet, USB
Other peripherals:
	TWL5030 PMIC+Audio+Keypad
	VGA display
Expansion ports:
	Memory devices plugin boards (PISMO)
	Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
		 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

	Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.
Signed-off-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTom Rix <Tom.Rix@windriver.com>