Both pblimage and mxsimage use the same crc algorithm, so refactor.
Signed-off-by: NCharles Manning <cdhmanning@gmail.com>

The crc32 used by pblimgae is NOT the same as zlib crc32.

The pbl_crc32 is useful for other purposes in mkimage so split it out.

While we are about it, clean up redundant and confusing code.
Signed-off-by: NCharles Manning <cdhmanning@gmail.com>

The return code is not consistent with cli_simple_run_command_list(). For the
last command in a sequence, the return code is actually inverted.

Fix it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When a simple command like 'false' is provided, hush should return the
result of that command. However, hush only does this if the
FLAG_EXIT_FROM_LOOP flag is provided. Without this flag, hush will
happily execute the empty string command immediate after 'false' and
then return a success code.

This behaviour does not seem very useful, and requiring the flag also
seems wrong, since it means that hush will execute only the first command
in a sequence.

Add a check for empty string and fall out of the loop in that case. That
at least fixes the simple command case. This is a change in behaviour but
it is unlikely that the old behaviour would be considered correct in any
case.
Reported-by: NStefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: NSimon Glass <sjg@chromium.org>

The mask value used in itest overflows and therefore it can return an
incorrect result for something like 'itest 0 == 1'. Fix it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

run_command_list() is supposed to return a return code of 0 for success
and 1 for failure. Add a few simple tests that confirm this. These tests
work both with the built-in parser and hush.
Signed-off-by: NSimon Glass <sjg@chromium.org>

"make ep8248_config" fails with an error like this:

    $ make ep8248_config
    make: *** [ep8248_config] Error 1

Its cause is that there are two entries for "ep8248".

The first is around line 661 of boards.cfg. (as Active)
The second appears around line 1242. (as Orphan)

This bug was originally introduced by commit e7e90901
and I fixed it by commit 8ad5d45e.
(Refer to git-log of commit 8ad5d45e)

But this bug was re-introduced by commit 05d134b0 because
the custodian made a mistake when he resolved a merge conflict.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Kim Phillips <kim.phillips@linaro.org>

"checkstack" target uses $(PERL) so PERL must be defined.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

RANLIB was added by commit e2211743 (more than a decade ago)
but it has been never referenced at all.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

The build fails if a non-generic ARM board is compiled
with CONFIG_OF_EMBED=y.

The correct symbol name for embedded FDT is not __dtb_db_begin,
but __dtb_dt_begin. (A typo introduced by commit 6ab6b2af)
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This enables relocation of initrd to the end of available DDR before Linux
kernel start-up as it is done in other architectures.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC8xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

The quad100hd has been unmaintained and dead ever since it's been
added some 6 years ago.  Remove it.

Also update README.scrapyard and insert some commit IDs for removed
boards.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Gary Jennejohn <gljennjohn@googlemail.com>

It doesn't seem necessary to use memory allocation in this code. The setenv()
will make a copy anyway.
Signed-off-by: NSimon Glass <sjg@chromium.org>

bootdelay_process() never returns in some circumstances, whichs makes the
control flow confusing. Change it so that the decision about how to execute
the boot command is made in the main_loop() code, so it is easier to follow.
Move CLI stuff to cli.c.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move these details from main (which doesn't care which parser is used) to
cli.c where they belong.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The main loop is easier to follow if the code is grouped into separate
functions. Make this change, so that main_loop() is easier to read.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This code seems unnecessarily complex. We really just need to check the
global_data. Now that is it all in one place, and not arch-specific, this
is pretty easy.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add a bootretry_ prefix to these two functions, and remove the need for
the #ifdef around everything (it moves to the Makefile).
Signed-off-by: NSimon Glass <sjg@chromium.org>

This code is only used by one board, so it seems a shame to clutter up
the readline code with it. Move it into its own file.
Signed-off-by: NSimon Glass <sjg@chromium.org>

We now have a single entry point to the CLI, whether simple or hush. Put
this in its own file.
Signed-off-by: NSimon Glass <sjg@chromium.org>

The autoboot code is complex and long. It deserves its own file with
a simple interface from main.c.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This makes it clear where the code resides.
Signed-off-by: NSimon Glass <sjg@chromium.org>

It doesn't make sense to have the simple parser and the readline code
all in main. Split them out into separate files.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Move the CLI prototypes from common.h to cli.h as part of an effort to
reduce the size of common.h.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Hush is a command-line interpreter, so rename it to make that clearer.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Some files include hush.h but don't actually use it. Remove this where
possible.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Development board for headless gateway platform from Abilis Systems.
Initial commit with working UART and DW GMAC.

For now with generic Ethernet PHY due to problems in Realtek PHY driver.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>