- 23 6月, 2011 2 次提交
-
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 Michael Schwingen 提交于
Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
- 22 6月, 2011 24 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Sergey Lapin 提交于
Make AFEB9260 build again. Based on fix for AT91SAM9260EK. Signed-off-by: NSergey Lapin <slapin@ossfans.org>
-
This patch fixes following compile warning: ---8<--- macb.c: In function 'macb_write_hwaddr': macb.c:525:2: warning: dereferencing type-punned pointer will break strict-aliasing rules --->8--- Signed-off-by: NAndreas Bießmann <andreas.devel@gmail.com>
-
This patch removes the warning ---8<--- at91_emac.c: In function 'at91emac_write_hwaddr': at91_emac.c:487:2: warning: dereferencing type-punned pointer will break strict-aliasing rules --->8--- Signed-off-by: NAndreas Bießmann <andreas.devel@gmail.com>
-
由 Eric Benard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Benard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Benard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Eric Benard 提交于
atmel rework changed define names which broke this file Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Reinhard Meyer 提交于
The rework effort for ATMEL (AT91/AVR32) accidentially broke build of this driver. Fix this to make it build again. However this driver should be reworked as soon as possible! Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
Fix EMK TOP9000 board to build again: - changes required due to ATMEL rework Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Reinhard Meyer 提交于
Make ATMEL's at91sam9260/9g20/9xe-ek boards build again Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>
-
由 Ryan Mallon 提交于
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 single board computer modules. Includes NAND flash and Ethernet support. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com>
-
由 Jens Scharsig 提交于
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme * Fix: timer.c compile error io.h not found with arm/at91rm9200 * update arm920t/at91 to ATMEL_xxx name scheme * update arm920t/at91 soc lib * update at91_emac driver Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de> Tested-by: NAndreas Bießmann <andreas.devel@gmail.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Helmut Raiger 提交于
Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Fabio Estevam 提交于
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Stefano Babic 提交于
Remove obsolete config.mk from QONG board. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Aneesh V 提交于
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
DRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Aneesh V 提交于
Provide SDRAM base address and use SRAM for initial stack Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 10 6月, 2011 1 次提交
-
-
由 Timur Tabi 提交于
The clock-frequency property in an audio codec's device tree node is set to the input clock frequency for that codec. On the Freescale P1022DS board, the input clock is enabled only if the hwconfig 'audclk' option is set. Therefore, the property should only be set in the device tree if the clock is actually enabled. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 09 6月, 2011 2 次提交
-
-
git://git.denx.de/u-boot-arm由 Wolfgang Denk 提交于
* 'master' of git://git.denx.de/u-boot-arm: SMDK6400: fix the compiler error imx27lite: Remove local config.mk mx31ads: Fix environment location on flash imx31_litekit: Remove local config.mk mx31litekit: Fix boot with the new relocation scheme. mx31ads: Use the new relocation scheme
-
由 Minkyu Kang 提交于
This patch adds _end for fix following compiler error arch/arm/cpu/arm1176/start.o: In function `_end_ofs': arch/arm/cpu/arm1176/start.S:61: undefined reference to `_end' Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 07 6月, 2011 3 次提交
-
-
由 Fabio Estevam 提交于
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Felix Radensky 提交于
At the moment u-boot and u-boot environment on flash have overlapping addresses, so each u-boot update erases the environment. Fix this by placing evironment right after u-boot. Also, remove confusing comment about environment location. Signed-off-by: NFelix Radensky <felix@embedded-sol.com>
-
由 Fabio Estevam 提交于
Local board config.mk should be avoided. Place CONFIG_SYS_TEXT_BASE definition into the board config file instead. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 06 6月, 2011 2 次提交
-
-
由 Fabio Estevam 提交于
imx31_litekit has been converted to the new relocation scheme, but it does not boot. Make the boot functional by using board_early_init_f . Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Fabio Estevam 提交于
This fixes the MX31ADS build by using the new relocation scheme. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NFelix Radensky <felix@embedded-sol.com>
-
- 04 6月, 2011 5 次提交
-
-
由 Harald Krapfenbauer 提交于
The recent commit ea882baf broke embedding environments in the middle of a sector, so relocate it to the start of the 2nd sector. Signed-off-by: NHarald Krapfenbauer <harald.krapfenbauer@bluetechnix.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Now that the zlib code has been relocated to a dedicated subdir, make sure we still build it with -O2 for boards that want speed over size. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Relocate the env to one of the small end sectors to avoid issues with embedding it, such as support being broken (by recent commit ea882baf), and for taking a while to save updates. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Turns out the documentation is wrong and doing "RAISE 1" does not result in a software reset, only a core reset. So when the on-chip rom has a functioning reset helper, use it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Now that common code is a bit smarter when it comes to default LDSCRIPT values, rename the default Blackfin file and drop the Blackfin-specific config.mk logic. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 03 6月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-