This fixes the breakage with SPL on most OMAP boards after the GPIO
driver was moved.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: NTom Rini <trini@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>

am33xx boards have at least one eeprom and in the case of beaglebones
with capes, more.
Signed-off-by: NTom Rini <trini@ti.com>

- Add default commands
- Add HUSH parser
- Make environment, malloc areas larger
- Add ATAGS and OF_LIBFDT
- Add defaults to boot ramdisk and MMC, use uEnv.txt
Signed-off-by: NTom Rini <trini@ti.com>

This patch adds board-specific initialization for CPSW on
TI AM335X based boards. Tested on BeagleBone.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
[Ilya: split board-specific part into separate patch]
Signed-off-by: NIlya Yanok <ilya.yanok@cogentembedded.com>

This patch sets up pinmux, enables fclk, and
defines CONFIG_I2C_MULTI_BUS
Signed-off-by: NSteve Sakoman <steve@sakoman.com>

UART_RESET, UART_CLK_RUNNING_MASK, and UART_SMART_IDLE_EN
are defined inn evm.c but not used. Also removes unnecessary
include of serial.h

PHYS_DRAM_1_SIZE is defined in am335x_evm.h but never used.
Signed-off-by: NSteve Sakoman <steve@sakoman.com>

Cc: Chandan Nath <chandan.nath@ti.com>
Tested-by: NTom Rini <trini@ti.com>
Signed-off-by: NMatt Porter <mporter@ti.com>

Add i2c driver board hookup for AM335X EVM
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NPatil, Rachna <rachna@ti.com>

This patch is added to support SPL feature on AM335X
platform. In this patch, MMC1 is configured as boot
device for SPL and support for other devices will be
added in the next patch series.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

This patch add supports for mmc/sd driver on AM335X platform.
PLL and pinmux configurations for mmc/sd are configured in this
patch.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>

This patch is added to correct some of the AM335X config
parameters which were incorrect along with some cleanup
like removing unused code.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>

This patch is added to replace CONFIG_AM335X symbol
with CONFIG_AM333XX for AM33XX platforms.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>
Tested-by: NThomas Weber <weber@corscience.de>

This is registered and can be removed at the next sync up.
Signed-off-by: NTom Rini <trini@ti.com>

This patch adds basic support for booting the board.
This patch adds support for the UART necessary to
get to the u-boot prompt.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>