提交 750b4bfe 编写于 作者: C Chandan Nath 提交者: Albert ARIBAUD

ARM:AM33XX: Fixing AM335X config parameters

This patch is added to correct some of the AM335X config
parameters which were incorrect along with some cleanup
like removing unused code.
Signed-off-by: NChandan Nath <chandan.nath@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>
上级 fb072a3e
......@@ -30,7 +30,7 @@
#define CONFIG_AM335X_CONFIG_DDR
#define CONFIG_ENV_SIZE 0x400
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024))
#define CONFIG_SYS_PROMPT "AM335X# "
#define CONFIG_SYS_PROMPT "U-Boot# "
#define CONFIG_SYS_NO_FLASH
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
......@@ -48,14 +48,12 @@
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
#define V_SCLK (V_OSCK)
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for
initial data */
#define CONFIG_CMD_ECHO
/* max number of command args */
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_MAXARGS 16
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 512
......@@ -75,7 +73,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ (8 * 1024 * 1024))
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
#define CONFIG_SYS_HZ 1000 /* 1ms clock */
......@@ -89,7 +86,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
GENERATED_GBL_DATA_SIZE)
/* Platform/Board specific defs */
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ 1000
......@@ -100,7 +96,6 @@
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM4 0x481A6000 /* UART3 on IA BOard */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册