This converts the following to Kconfig:
   CONFIG_SYS_I2C_MXC
   CONFIG_SYS_I2C_MXC_I2C1
   CONFIG_SYS_I2C_MXC_I2C2
   CONFIG_SYS_I2C_MXC_I2C3
   CONFIG_SYS_I2C_MXC_I2C4
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_SPEED
   CONFIG_SYS_I2C_SLAVE
Signed-off-by: NTom Rini <trini@konsulko.com>

The omap24xx I2C driver uses its own CONFIG namespace for common I2C
variables.  Rather than convert more of them to Kconfig, rename these to
the common I2C ones and remove the entirely unused functionality.  As
part of this, we make the am335x_shc platforms consistent with their
intended speed values.
Signed-off-by: NTom Rini <trini@konsulko.com>

Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on
SPL_SYS_I2C_LEGACY.  Remove the weak implementation as it's either
something that needs to exist for real, or shouldn't be called.
Signed-off-by: NTom Rini <trini@konsulko.com>

First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig.  Next, as you cannot
have SYS_I2C_LEGACY and DM_I2C at the same time, introduce
CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only
in SPL.  Finally, for some PowerPC cases we also need
CONFIG_TPL_SYS_I2C_LEGACY support.  Convert all of the existing users to
one or more symbols.
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_MVTWSI
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_SOFT
   CONFIG_SYS_I2C_SOFT_SPEED
   CONFIG_SYS_I2C_SOFT_SLAVE
Signed-off-by: NTom Rini <trini@konsulko.com>

- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.
Signed-off-by: NTom Rini <trini@konsulko.com>

At this point in time, there's no systems with "U-Boot environment
exists on an EEPROM which is accessed over the I2C bus" that sets this
option.  Drop it.
Signed-off-by: NTom Rini <trini@konsulko.com>

Finish moving this driver to Kconfig.
- Update the dependency logic for Exynos5 too
- Remove the unused CONFIG_SYS_I2C_S3C24X0_SPEED variable
- Drop CONFIG_SYS_I2C_S3C24X0_SLAVE as it's always set to 0.
- Move the internal SYS_I2C_S3C24X0_SLAVE define closer to the only user.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>

This converts the following to Kconfig:
   CONFIG_ID_EEPROM
Signed-off-by: NTom Rini <trini@konsulko.com>

The instances of CONFIG_SYS_I2C_EEPROM_ADDR on these platforms doesn't
match up with the rest of the EERPOM related defines in U-Boot.  Move
these out of the CONFIG namespace rather than make complex Kconfig
logic.

Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NAnatolij Gustschin <agust@denx.de>

As the code reads now, making this code path use
CONFIG_SYS_IVM_EEPROM_ADR rather than CONFIG_SYS_I2C_EEPROM_ADDR seems
to make sense as the rest of the EEPROM infrastructure isn't used on
these platforms.

Cc: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>

The shc platforms do not make use of the rest of the EEPROM
infrastructure.  Rather than make more elaborate Kconfig logic, remove
this setting from the CONFIG namespace.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

This platform does not use any of the standard EEPROM functionality and
instead provides its own.  Use a local namespace for the I2C related
defines to access the EEPROM.

Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NLukasz Majewski <lukma@denx.de>

This code is no longer used, remove it.
Signed-off-by: NTom Rini <trini@konsulko.com>

Rework the default environment a bit to not use non-standard
CONFIG_ENV_... names and similar one-off CONFIG names.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>

Rename CONFIG_ENV_KS2_BOARD_SETTINGS to ENV_KS2_BOARD_SETTINGS so that
it better fits with the rest of the environment addition macros.

Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS in
order to not further add to the CONFIG namespace.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

There are a number of DWC2 configuration options that are set in dwc2.h
and referenced in dwc2.c only.  Move these out of the CONFIG_DWC2
namespace and in to the DWC2 namespace.  Note that hikey was defining an
option that was already always enabled, so we can remove that hunk.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>

Add CONFIGs for N5X.
Signed-off-by: NSiew Chin Lim <elly.siew.chin.lim@intel.com>

Rename to common file name to used by all SOC64 devices and change
"_S10_" to "_SOC64_" in base_addr_soc64.h.
Signed-off-by: NSiew Chin Lim <elly.siew.chin.lim@intel.com>

Update boot-commands to load device-tree from
boot-device at 'fdt_addr_r' address in DDR
during distro-boot.
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

Use moveconfig.py script to convert below defines to Kconfig and move
these entries to defconfigs.
    CONFIG_CORTINA_FW_ADDR
    CONFIG_CORTINA_FW_LENGTH
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This symbol was largely migrated, except for one case.  Update it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Basically all, i.e. rk3036.dtsi, rk3128.dtsi, rk3xxx.dtsi, rk322x.dtsi,
rk3288.dtsi, rk3308-u-boot.dtsi, rk3328-u-boot.dtsi, rk3399-u-boot.dtsi
and px30-u-boot.dtsi Rockchip SoC devicetrees which have mmc indexes
are defining eMMC as mmc0 and sdmmc as mmc1.
This means that the rule to try to boot from the SD card first is ignored,
which as per comment is what we want and is important for distros, which
rely on that.

Fix this by setting the correct mmc index, i.e. first from mmc1 (SD card),
second from mmc0 (eMMC).
Signed-off-by: NAlex Bee <knaerzche@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Enable support to the 2 NOR flashes on the QEMU RISC-V virt machine.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

Config option CONFIG_SYS_TCLK is set by kw88f6281.h and kw88f6192.h files
to correct SOC/platform value. So do not overwrite it in board config
include files.

Kirkwood 88F6180 and 88F6192 uses 166 MHz TCLK and Kirkwood 88F6281 uses
200 MHz TCLK.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NStefan Roese <sr@denx.de>

This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.

Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove
useless default CONFIG_SYS_TCLK value from the end of soc.h file.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NStefan Roese <sr@denx.de>

This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NStefan Roese <sr@denx.de>

Bit 20 in SAR register specifies if TCLK is running at 200 MHz or 166 MHz.
Use this information instead of manual configuration in every board file.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NStefan Roese <sr@denx.de>

Bit 15 in SAR register specifies if TCLK is running at 200 MHz or 250 MHz.
Use this information instead of manual configuration in every board file.
Signed-off-by: NPali Rohár <pali@kernel.org>
Reviewed-by: NStefan Roese <sr@denx.de>

Enable DM SATA in board file.
Signed-off-by: NTony Dinh <mibodhi@gmail.com>
Reviewed-by: NStefan Roese <sr@denx.de>

Activate the following Kconfig options:
* AVB       for Android Verified Boot support
* ADTIMG    for merging DTBOs
* ABOOTIMG  for extracting Android boot image

Also rework the partitioning tables:
- add a misc partition to handle BCB messages
- add a dtbo partition to store various DTBOs
- add a vbmeta partition for AVB hashes
- Merge vendor and system into the "super" partition

Note: avb support is disables by default. To activate it:
 => setenv force_avb 1;
 => saveenv;
Signed-off-by: NGuillaume La Roque <glaroque@baylibre.com>
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

doc/README.gpt states:

> The fields 'uuid' and 'uuid_disk' are optional if CONFIG_RANDOM_UUID is
> enabled. A random uuid will be used if omitted or they point to an empty/
> non-existent environment variable. The environment variable will be
> set to the generated UUID.  The 'gpt guid' command reads the current
> value of the uuid_disk from the GPT.

Since we have CONFIG_RANDOM_UUID=y, remove the hard-coded uuids
and use meaningful variable names instead.
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

There is a mix of spaces and tabs at the leading \. This makes updating
theses lines harder.

Add a single space before each \ for some consistency.
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Since Android 10, we are required to use a "dtbo" partition which
includes the various device-tree overlays [1].
It's also possible to provide a "dtb" partition.

This is supported via the "abootimg" command.

On Yukawa, the assumption is that we have only a "dtbo" partition, which
includes all board dtbs and their dtbos [2]

[1] https://source.android.com/devices/architecture/dto/partitions
[2] https://android.googlesource.com/device/amlogic/yukawa/+/refs/heads/master/build/tasks/dtimages.mk#16Signed-off-by: NGuillaume La Roque <glaroque@baylibre.com>
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

BOOT_CMD might be different based on CONFIG_CMD_ABOOTIMG.

To prepare for abootimg support, extract the boot command
to a dedicated macro.
Signed-off-by: NGuillaume La Roque <glaroque@baylibre.com>
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

Implement A/B slot selection using the U-Boot ab_select command.

Keep support for non A/B.

Not: We need to redefine the recovery partition label, as RecoveryOS
is included in the boot image for A/B systems [1]

[1] https://source.android.com/devices/tech/ota/ab/ab_implement#recoverySigned-off-by: NGuillaume La Roque <glaroque@baylibre.com>
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

AVB (Android Verified Boot) is well supported in U-Boot already.
Add support for it in meson64_android.

This is controlled by the "force_avb" environment variable and the
CONFIG_CMD_AVB option.
Signed-off-by: NGuillaume La Roque <glaroque@baylibre.com>
Signed-off-by: NMattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>