- 15 10月, 2021 3 次提交
-
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_NO_RELOCATION in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
This define was left over from a previous revision, and was never used. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Remove some config finishing by _ badly added by scripts/build-whitelist.sh when joker is used in comments. for example: doc/uImage.FIT/command_syntax_extensions.txt: ... #ifdef CONFIG_OF_* | ... cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \ FLASH|MMC|FAT|EXT4|\ Remove also configs only used in comments: - CONFIG_BOOGER in include/linux/kconfig.h - CONFIG_COMMANDS - CONFIG_INIT_IGNORE_ERROR - CONFIG_REG_* - CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18 Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
- 08 10月, 2021 3 次提交
-
-
由 Patrick Delaunay 提交于
Remove the latest reference of CONFIG_USER_LOWLEVEL_INIT in code Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
由 Patrick Delaunay 提交于
Remove the following STV0991 specific configs: - CONFIG_STV0991 (never used, only defined in CONFIG_SYS_EXTRA_OPTIONS) - CONFIG_STV0991_HZ (replaced by generic CONFIG_SYS_HZ) - CONFIG_STV0991_HZ_CLOCK (replaced by generic CONFIG_SYS_HZ_CLOCK) This patch allows to reduce the file config_whitelist.txt. Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
由 Patrick Delaunay 提交于
This converts the CONFIG_STM32_FLASH to Kconfig by using tools/moveconfig.py Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>
-
- 06 10月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_NAND_5_ADDR_CYCLE Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 9月, 2021 1 次提交
-
-
由 Patrick Delaunay 提交于
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 25 9月, 2021 2 次提交
-
-
由 Kristian Amlie 提交于
Signed-off-by: NKristian Amlie <kristian.amlie@northern.tech> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Patrick Delaunay 提交于
Remove the driver st_smic.c used in SPEAr products and the associated config CONFIG_ST_SMI; this driver is no more used in U-Boot after the commit 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support"). Fixes: 570c3dcf ("arm: Remove spear600 boards and the rest of SPEAr support") Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 21 9月, 2021 2 次提交
-
-
由 Eugen Hristev 提交于
AT91EMAC driver is unused, thus removing. Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Reviewed-by: NRamon Fried <rfried.dev@gmail.com>
-
由 Eugen Hristev 提交于
CONFIG_SYS_AT91_CPU_NAME looks to be unused. Remove it and remove it from config_whitelist.txt Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
-
- 17 9月, 2021 1 次提交
-
-
由 Tom Rini 提交于
CONFIG_SPIFLASH is manually re-added as it is not a new symbol, but now only exists in CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 9月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 9月, 2021 2 次提交
-
-
由 Simon Glass 提交于
This does not work with driver model so can be removed. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Note that we have to add CONFIG_SPIFLASH to scripts/config_whitelist.txt because it's not really migrated at this point. Acked-by: NMichael Durrant <mdurrant@arcturusnetworks.com> Acked-by: NOleksandr Zhadan <oleks@arcturusnetworks.com> Acked-by: NOleksandr Zhadan and Michael Durrant <arcsupport@arcturusnetworks.com> Signed-off-by: NSimon Glass <sjg@chromium.org> [trini: Handle CONFIG_SPIFLASH differently and delete Kconfig file] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 05 9月, 2021 3 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Simon Glass 提交于
This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_DMA_LPC32XX Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 01 9月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_RAMBOOT_PBL CONFIG_SYS_FSL_PBL_PBI CONFIG_SYS_FSL_PBL_RCW Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 31 8月, 2021 3 次提交
-
-
由 Tom Rini 提交于
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_ID_EEPROM Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
There are a number of DWC2 configuration options that are set in dwc2.h and referenced in dwc2.c only. Move these out of the CONFIG_DWC2 namespace and in to the DWC2 namespace. Note that hikey was defining an option that was already always enabled, so we can remove that hunk. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 8月, 2021 1 次提交
-
-
由 Kuldeep Singh 提交于
Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 11 8月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 06 8月, 2021 2 次提交
-
-
由 Simon Glass 提交于
This is not used in U-Boot at present. Drop it and related config options. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is not used. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 05 8月, 2021 1 次提交
-
-
由 Heinrich Schuchardt 提交于
Symbol CONFIG_SYS_ID_EEPROM is defined in include/configs/MPC8548CDS.h but never used. Remove it here and from the whitelist. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 31 7月, 2021 1 次提交
-
-
由 Pali Rohár 提交于
Macro CONFIG_SYS_U_BOOT_OFFS is set but not used anymore. Remove it. Signed-off-by: NPali Rohár <pali@kernel.org> Reviewed-by: NMarek Behún <marek.behun@nic.cz> Reviewed-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de>
-
- 29 7月, 2021 2 次提交
-
-
由 Simon Glass 提交于
This actually does nothing but is defined by a few dozen boards. Drop it, so we can define a real one. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Simon Glass 提交于
It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 27 7月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 7月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 7月, 2021 2 次提交
-
-
由 Trevor Woerner 提交于
Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: NTrevor Woerner <twoerner@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Trevor Woerner 提交于
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: NTrevor Woerner <twoerner@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 17 6月, 2021 1 次提交
-
-
由 Yangbo Lu 提交于
Drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT is used instead. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Acked-by: Michael Walle <michael@walle.cc> [for kontron-sl28] Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 09 6月, 2021 1 次提交
-
-
由 Aswath Govindraju 提交于
Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: NPratyush Yadav <p.yadav@ti.com> Signed-off-by: NAswath Govindraju <a-govindraju@ti.com> Acked-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: NMatthias Brugger <mbrugger@suse.com> Acked-by: NLukasz Majewski <lukma@denx.de>
-
- 26 5月, 2021 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-