Add QSPI Secure Boot target to enable chain of trust
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Reviewed-by: NRuchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Define bootscript and its header addresses for QSPI target
Also add PPA header address in Kconfig
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add QSPI Secure Boot target. Also enable sec init.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add NOR secure boot target. Also enable sec init.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Define bootscript and its header addresses for QSPI target. Also
define PPA header address to enable PPA validation.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>

Enable PPA in secure boot by defining FSL_LS_PPA macro in its
defconfig file.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

The header address of PPA defined in Kconfig.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

BLOB feature is not required during SPL compilation.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Using changes in this patch we were able to reduce approx 4k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1046ardb/Makefile to remove
   compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1046ardb/ls1046ardb.c to keep
   only ddr_init and board_early_init_f funcations in case of SPL
   build.
3. Changes in ls1046a_common.h & ls1046ardb.h to remove driver
   specific macros due to which static data was being compiled in
   case of SPL build.
4. Disable MMC driver from bieng compiled in case of SPL NAND
   build and NAND driver from bieng compiled in case of SPL MMC build.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Using changes in this patch we were able to reduce approx 10k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1043ardb/Makefile to remove
   compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1043ardb/ls1043ardb.c to keep
   only ddr_init and board_early_init_f funcations in case of SPL
   build.
3. Changes in ls1043a_common.h & ls1043ardb.h to remove driver
   specific macros due to which static data was being compiled in
   case of SPL build.
4. Disable MMC driver from bieng compiled in case of SPL NAND
   build and NAND driver from bieng compiled in case of SPL MMC build.
5. Remove I2C driver support from SPL in case of LS1043ARDB.
Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: NSumit Garg <sumit.garg@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Depending on DDR configuration, gcc-6.x will show up unused-const-
variable messages. Use __maybe_unused specifier for all dynamic_odt
variable definitions to remove these warnings.

Memory footprint will not increase as gcc will optimize out unused
constants.
Signed-off-by: NThomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: NYork Sun <york.sun@nxp.com>

When writing out some of our results we may now have UTF-8 characters
in there as well.  Translate these to latin-1 and ignore any errors (as
this is for diagnostic and given the githash anything else can be
reconstructed by the user.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NTom Rini <trini@konsulko.com>

This fixes a regression caused by

commit 07b2b78c
    dm: usb: Convert USB storage to use driver-model for block devs

which caused part_init to be called when it was not previously.
Without this patch, the following happens when a USB sd card reader is used.

=> usb start
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 3 USB Device(s) found
       scanning usb for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
 ### ERROR ### Please RESET the board ###

This happens because dev_desc->blksz is 0.
Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>

We should invalidate the dcache before starting the DMA. In case there are
any dirty lines from the DMA buffer in the cache, subsequent cache-line
replacements may corrupt the buffer in memory while the DMA is still going on.
Cache-line replacement can happen if the CPU tries to bring some other memory
locations into the cache while the DMA is going on.
Signed-off-by: NEddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>

Merely using dma_alloc_coherent does not ensure that there is no stale
data left in the caches for the allocated DMA buffer (i.e. that the
affected cacheline may still be dirty).

The original code was doing the following (on AArch64, which
translates a 'flush' into a 'clean + invalidate'):
  # during initialisation:
      1. allocate buffers via memalign
      	 => buffers may still be modified (cached, dirty)
  # during interrupt processing
      2. clean + invalidate buffers
      	 => may commit stale data from a modified cacheline
      3. read from buffers

This could lead to garbage info being written to buffers before
reading them during even-processing.

To make the event processing more robust, we use the following sequence
for the cache-maintenance:
  # during initialisation:
      1. allocate buffers via memalign
      2. clean + invalidate buffers
      	 (we only need the 'invalidate' part, but dwc3_flush_cache()
	  always performs a 'clean + invalidate')
  # during interrupt processing
      3. read the buffers
      	 (we know these lines are not cached, due to the previous
	  invalidation and no other code touching them in-between)
      4. clean + invalidate buffers
      	 => writes back any modification we may have made during event
	    processing and ensures that the lines are not in the cache
	    the next time we enter interrupt processing

Note that with the original sequence, we observe reproducible
(depending on the cache state: i.e. running dhcp/usb start before will
upset caches to get us around this) issues in the event processing (a
fatal synchronous abort in dwc3_gadget_uboot_handle_interrupt on the
first time interrupt handling is invoked) when running USB mass
storage emulation on our RK3399-Q7 with data-caches on.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The dwc3_flush_cache() call was declared and used inconsistently:
 * The declaration assumed 'int' for addresses (a potential issue
   when running in a LP64 memory model).
 * The invocation cast the address to 'long'.

This change ensures that both the declaration and usage of this
function consistently uses 'uintptr_t' for correct behaviour even
when the allocated buffers (to be flushed) reside outside of the
lower 32bits of memory.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Both these numbers are calculated in runtime and dynamically assigned
to the device descriptor during bind().
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

We don't want to claim that we support a serial number string and
later return nothing. Because of that, if g_dnl_serial is an empty
string, let's skip setting iSerialNumber to a valid number.
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

A USB String descriptor can be up to 255 characters long and it's not
NULL terminated according to the USB spec. This means our
MAX_STRING_SERIAL should be 256 (to cope with NULL terminator).
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>

After enabling log printing to lcd, when the screen starts
scrolling, system crashes. Log is shown as bellow:

    "Synchronous Abort" handler, esr 0x96000045
    "Synchronous Abort" handler, esr 0x96000045

Checking the source code, we found that the variable "pixels"
gets a wrong value:

    int pixels = VIDEO_FONT_HEIGHT * vid_priv->line_length;

"pixels" here means the value of pixels for a character, rather
than the bytes for a character. So the variable "pixels" is 4
times bigger than it's exact value, which will cause the memory
overflow when the cpu runs the following code:

    for (i = 0; i < pixels; i++)
        *dst++ = clr; <<----
Signed-off-by: NEric Gao <eric.gao@rock-chips.com>

DT binding documentation for atmel HLCDC driver.
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>

Add driver-model support to this driver.
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>

Some board do not use the dwc2 internal VBUS_DRV signal, but
use a gpio pin to enable the 5.0V VBUS power, add interface to
enable the power in dwc2 driver.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Signed-off-by: NSimon Glass <sjg@chromium.org>

This removes the default environment from the sr1500 header
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

This board has no upstream devicetree in the kernel source,
so set to socfpga_cyclone5_sr1500.dtb.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE
 - set devicetree name to match socfpga_{fpga model}_{board model}.dts
   pattern

This removes the default environment from the socrates headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

Change default devicetree name to match devicetree name in
upstream kernel source.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE

This removes the default environment from the SoCKit headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

Change default devicetree name to match devicetree name in
upstream kernel source.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE

This removes the default environment from the de1 headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

This board does not have a devicetree in the upstream kernel
source so set devicetree to socfpga_cyclone5_de1_soc.dtb.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in V2:
 - Remove unneeded CONFIG_BOOTFILE
 - set devicetree name to match socfpga_{fpga model}_{board model}.dts
   pattern

This removes the default environment from the C5 SoCDK headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

In addition to the above, add support to boot from the custom
a2 type partition.

Change default devicetree name to match devicetree name in
upstream kernel source.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE

This removes the default environment from the A5 socdk headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

Add support to boot from the custom a2 type partition.

Change default devicetree name to match devicetree name in
upstream kernel source.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v3:
 - Fix small typo in defconfig, missing "C"
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE
 - Fix dtb name

a5config test
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>

This removes the default environment from the de0 headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

In addition to the above, add support to boot from the custom
a2 type partition
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE

This adds a common environment and support for distro boot
in the common socfpga header.
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

--
Changes in v5:
 - Per Frank, to support OpenSuse the ENV must be after the GPT
Changes in v4:
 - Move env back to being right after the MBR
Changes in v3:
 - fix spacing between asterix
 - remove verify=n as a default setting

Changes in v2:
 - Remove unneeded CONFIG_BOOTFILE and fdt_addr
 - cleanup spacing in MMC env size

common
Signed-off-by: NDalon Westergreen <dwesterg@gmail.com>

Convert Altera DDR SDRAM driver to use Kconfig method.
Enable ALTERA_SDRAM by default if it is on Gen5 target.
Arria 10 will have different driver.
Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

Add compatible strings for Intel Arria 10 SoCFPGA device.
Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>

Disable the OC test on MCVEVK as the old PHY version does not provide
this information. This fixes the USB OTG operation.
Signed-off-by: NMarek Vasut <marex@denx.de>

Add default DFU altinfo for eMMC.
Signed-off-by: NMarek Vasut <marex@denx.de>

There is no point in having such gargantuan buffer, it only requires
huge malloc area. Reduce the DFU buffer size.
Signed-off-by: NMarek Vasut <marex@denx.de>