- 27 7月, 2020 40 次提交
-
-
由 Xiaowei Bao 提交于
Split the RC and EP driver, and reimplement the EP driver base on the EP framework. Signed-off-by: NXiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Wasim Khan 提交于
lx2160a rev2 requires 4KB space for type0 and 4KB space for type1 iATU window. Increase configuration size to 8KB to have sufficient space for type0 and type1 window. Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Manish Tomar 提交于
Add TFA secure boot defconfig and Enables secure boot related configs in it. Signed-off-by: NManish Tomar <manish.tomar@nxp.com> Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
- Drop ifdef CONFIG_SYS_I2C to initialize baudrate of i2c - Drop warning of i2c_early_init_f as follows, warning: implicit declaration of function 'i2c_early_init_f'; did you mean 'arch_early_init_r'? [-Wimplicit-function-declaration] Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Enable secure system counter in board_early_init_f for udelay() to fix a bug that always return 0 by timer_read_counter() when boot from qspi(No TFA) Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
Move i2c_early_init_f to common function to initialize baudrate of i2c Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Register the random number generator with the rng subsystem in u-boot. This way it can be used by EFI as well as for the 'rng' command. Signed-off-by: NMichael Walle <michael@walle.cc> Tested-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
If it is already instantiated tear it down first and then reinstanciate it again with prediction resistance. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The secure keys (TDKEK, JDKEK, TDSK) can only be generated once after a POR. Otherwise the RNG4 will throw an error. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Since Era 10, the version registers changed. Add the version registers and use them on newer modules. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
We need the era in other modules, too. For example, to get the RNG version. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Align the status line with all the other output in U-Boot. Before the change: DDR 3.9 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated WDT: Started with servicing (60s timeout) After the change: DDR 3.9 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated WDT: Started with servicing (60s timeout) Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NHoria Geantă <horia.geanta@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Heinrich Schuchardt 提交于
The value 0 assigned to final is overwritten before ever being used. Remove the assignment. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Heinrich Schuchardt 提交于
The sequence of arguments should match the format string. For printing unsigned numbers we should use %u. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Hou Zhiqiang 提交于
The workaround has been implemented in PBI phase, so remove the duplicated implementation from U-Boot. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kuldeep Singh 提交于
Previous attempt to increase CONFIG_SYS_MALLOC_LEN was done in commit c084a8ed ("configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN size") which increased malloc memory to ~1M. PFE firmware alone requires 3M of dynamic memory allocation and therefore, increase the config value to a larger value i.e 5M. This size should be enough as of now to accommodate further memory requirements. Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Yangbo Lu 提交于
Enable CONFIG_BOARD_EARLY_INIT_R for SDHC adapter card identification and configuration. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Yangbo Lu 提交于
Add support for SDHC adapter identification and configuration during board init. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Yangbo Lu 提交于
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Yangbo Lu 提交于
The sdhc_adapter of global data has not been used, and we do not have to use it as global data even we may need it in the future. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Yuantian Tang 提交于
Add xspi boot source to qixis command to let the soc boot from flex-nor flash chip. Signed-off-by: NYuantian Tang <andy.tang@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Chaitanya Sakinam 提交于
The correct setting for the RGMII ports on LS1012ARDB is to enable delay on both Rx and Tx so the interface mode used should be PHY_INTERFACE_MODE_RGMII_ID Signed-off-by: NChaitanya Sakinam <chaitanya.sakinam@nxp.com> Signed-off-by: NAnji J <anji.jagarlmudi@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Udit Agarwal 提交于
Remove "fdt_high" environment variable to use the bootm_size to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: NUdit Agarwal <udit.agarwal@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
Enable dspi in lx2160aqds tfa defconfig Enable CONFIG_SPI_FLASH_SST/EON in config file. Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Zhao Qiang 提交于
Add flash node under dspi into fsl-lx2160a-qds.dtsi Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
On aarch64 running with dcache off, will result in an unaligned access exception: => dcache off => hash sha1 $kernel_addr_r 100 "Synchronous Abort" handler, esr 0x96000061 elr: 00000000960317d8 lr : 00000000960316a4 (reloc) elr: 00000000fbd787d8 lr : 00000000fbd786a4 [..] The compiler emits a "stur x1, [x0, #12]". x1 is might just be 32 bit aligned pointer. Remove the unused u64 element from the union to drop the minimal alignment to 32 bit. Also remove the union, because it is no more needed. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Biwen Li 提交于
This enables SYS_I2C_MXC to fix a bug that failed to boot from sd card with image u-boot-with-spl-pbl.bin Signed-off-by: NBiwen Li <biwen.li@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
There are two issues: (1) The spin table doesn't convert the endianness of the jump address. Although there is code for it, the result isn't used at all (x0). (2) If something goes wrong, the function returns. But that doesn't make sense at all. Use the actual converted jump address as destination to fix. If there is an error, jump to a trap loop. And rearrange the code exception level switching code to make it smaller and clearer. This reduces the size of the spin table code section from 696 bytes to 424 bytes. If CONFIG_ARMV8_SWITCH_TO_EL1 the code size reduced from 696 bytes to 632 bytes. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
On ARM64, a 64kb region is reserved for the runtime services code. Unfortunately, this code overlaps with the spin table code, which also needs to be reserved. Thus now that the code is relocatable, allocate a new page from EFI, copy the spin table code into it, update any pointers to the old region and the start the secondary CPUs. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Add a new variable secondary_boot_code_start, which holds a pointer to the start of the spin table code. This will help to relocate the code section. While at it, move the size variable from the end to the beginning so there is a common section for the variables. Remove any other symbols. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Now that the spin table is in a separate module, this is no longer necessary. Drop it. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
This function is not used outside the module. Make it static. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
There is no need to cast around. Assign the address to the local variable and use it. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Only the PowerPC architecture needs this function. Remove it. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Fix the alignment so it will match the comments. The spin table has to be 8 byte aligned, so ".align 3" is enough. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Don't use LDR to load a pointer to a function. This will generate a literal which cannot be relocated. Use ADR which is PC-relative and therefore can easily be relocated. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Move it out of lowlevel.S into spintable.S. On layerscape, the secondary CPUs are brought up in main u-boot. This will make it possible to only compile the spin table code for the main u-boot and omit it in SPL. This saves about 720 bytes in the SPL. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The generic armv8 code already has support to bring up the secondary cores. Thus, don't hardcode the jump in the layerscape lowlevel_init to the spin table code; instead just return early and let the common armv8 code handle the jump. This way we can actually use the CPU_RELEASE_ADDR feature. Signed-off-by: NMichael Walle <michael@walle.cc> [Rebased, Removed kontron_sl28.h change as file does not exist] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-