Since we can not set OsIndications from Runtime Services
SetVariables at this moment, it is better to ignore the
OsIndications if there is any capsule file in the
correct place.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Since the recent commit;

 commit b891ff18 ("efi_loader: Force a single FMP instance per hardware store")

forces a single FMP instances for a storage, we can not
enable both RAW and FIT capsule image support at once.
Since RAW capsule image support is simpler than FIT,
enable RAW capsule image instead of FIT by default.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Enable UEFI secure boot on synquacer. Note that unless user
setup their keys, the secure boot will not work.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Since the U-Boot for the SynQuacer DeveloperBox is designed for
compatible with EDK2 boot, we don't need to support Ext2/4 fs
support by default. Drop it.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Since MTD partitions are based on the devicetree name,
remove unneeded mtdparts settings and update DFU setting.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Add partition information to the spi-nor flash.
This is required for accessing NOR flash via mtdparts.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: NMarek Behún <marek.behun@nic.cz>

Make the U-Boot binary for SynQuacer position independent so
that the previous bootloader (SCP firmware or BL2) can load
the U-Boot anywhere.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

Since the SCBM SMMU is not only connected to the NETSEC
but also shared with the F_SDH30 (eMMC controller), that
should be initialized at board level instead of NETSEC.

Move the SMMU initialization code into board support
and call it from board_init().

Without this fix, if the NETSEC is disabled, the Linux
eMMC ADMA cause an error because SMMU is not initialized.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>

- A new driver uclass is created to handle the reboot mode control.
- Add support for libcrypt-style passwords for autoboot

This adds tests for the crypt-based and plain SHA256-based password hashing
algorithms in the autoboot flow.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

In case crypt-based hashing is enabled this will be the default mechanism
that is used. If a user wants to have support for both, the environment
variable `bootstopusesha256` can be set to `true` to allow plain SHA256
based hashing of the password.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The key-sequence based unlock mechanisms are sensitive to junk symbols
that could have been sent to stdin and are still waiting to be retrieved.
Enabling this option will read all symbols off stdin before displaying the
autoboot prompt (and starting to read the password from stdin).
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

In case a user has to enter a complicated password it is sometimes
desireable to give the user more time than the default timeout.
Enabling this feature will disable the timeout entirely in case the user
presses the <Enter> key before entering any other character.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

While doing code-review internally this got nitpicked by 2 reviewers, so
I decided to include this here.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Hook into the autoboot flow as an alternative to the existing
mechanisms.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>

In order to prevent using the global errno, replace it with a static
version and create a wrapper function which returns the error value.
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Add the basic functionality required to support the standard crypt
format.
The files crypt-sha256.c and crypt-sha512.c originate from libxcrypt and
their formatting is therefor retained.
The integration is done via a crypt_compare() function in crypt.c.

```
libxcrypt $ git describe --long --always --all
tags/v4.4.17-0-g6b110bc
```
Signed-off-by: NSteffen Jaeckel <jaeckel-floss@eyet-services.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeiko Schocher <hs@denx.de>

RTC devices could provide battery-backed memory that can be used for
storing the reboot mode magic value.

Add a new reboot-mode back-end that uses RTC to store the reboot-mode
magic value. The driver also supports both endianness modes.
Signed-off-by: NNandor Han <nandor.han@vaisala.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

A use case for controlling the boot mode is when the user wants
to control the device boot by pushing a button without needing to
go in user-space.

Add a new backed for reboot mode where GPIOs are used to control the
reboot-mode. The driver is able to scan a predefined list of GPIOs
and return the magic value. Having the modes associated with
the magic value generated based on the GPIO values, allows the
reboot mode uclass to select the proper mode.
Signed-off-by: NNandor Han <nandor.han@vaisala.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

A new driver uclass is created to handle the reboot mode control.

The new uclass driver is updating an environment variable with the
configured reboot mode. The mode is extracted from a map provided
at initialization time. The map contains a list of modes
and associated ids.
Signed-off-by: NNandor Han <nandor.han@vaisala.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

- Assorted FIT, optee, pcf8575, mux, vexpress64 and distro bootcmd fixes.
- Allow pinmux status to take pin names

CONFIG_NET_MULTI has been removed long time ago by commit 795428fc
("net: remove CONFIG_NET_MULTI") but 4 boards were added later which wasn't
found.  The patch is removing this reference from 4 boards.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NChris Packham <chris.packham@alliedtelesis.co.nz>

The macro should be passed a state, which should be passed
to the actual function.  Otherwise using that macro would
yield a build error.
Signed-off-by: NPatrick Wildt <patrick@blueri.se>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>

The ARM Juno boards can be used as somewhat decent machines to run
off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of
DRAM.

With stable DTs in the board's NOR flash this would work really nicely,
however the default boot command is to fetch a kernel and an initrd from
the on-board NOR flash, which sounds somewhat embedded.

Include the config_distro_bootcmd.h header and define the available
devices (starting with USB, to catch USB installer sticks) to make
distributions and UEFI work out of the box.
The NOR flash kernel functionality is still preserved as the last
resort, should all other methods fail.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>

The generic distro boot sequence iterates over several types of devices,
trying one after another. In doing do, it starts with setting the
"devtype" variable, then uses this later in more generic commands.

Now most (block) device types use a local variable for that, but DHCP
puts the type into the environment, where it shadows any local variables.
As a consequence any boot attempt after bootcmd_dhcp has been run fails:
===========================
VExpress64# run bootcmd_dhcp
...
VExpress64# run bootcmd_sata0
SATA#0:
        (3.0 Gbps)
SATA#1:
        (No RDY)
Device 0: Model: 16GB SATA Flash Drive  ....
... is now current device
Couldn't find partition dhcp 0:1
===========================
This problem typically doesn't show, because DHCP is mostly the last
command to try, but is a problem when this order is different, or when
distro_bootcmd or bootcmd_xxx are run separately or multiple times.

Let bootcmd_dhcp use a local variable, as the other kids do, to make the
order of boot commands irrelevant, and allow repeated calls.
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

When we build U-Boot with POSITION_INDEPENDENT we must have
SYS_TEXT_BASE be set to zero.  Make this the default in that case.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMark Kettenis <kettenis@openbsd.org>

Switch to fit_image_get_data_and_size() for consistency with all other
data loaded from FIT.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

As 'part_get_info_by_name' now returns more status codes than just
-1 to indicate failure, we need to update the return value check.
Signed-off-by: NAnders Dellien <anders.dellien@arm.com>
Reviewed-by: NSean Anderson <sean.anderson@seco.com>

This patch add support for using NXP's pca8574 I2C IO expander, which
has only 8 IO lines.

After this change the .data member's information from struct udevice_id
are used to either sent one or two bytes.

Moreover, the '_le16' suffix from pcf8575_i2c_{write|read}_le16()
functions have been removed as now we also sent 8 bit data.
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Those members are not used anymore as ones from gpio_dev_priv
structure (when DM_GPIO support is enabled) are used instead.
Signed-off-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Allow pin name parameter for pimux staus command,
as gpio command to get status of one pin.

The possible usage of the command is:

> pinmux dev pinctrl
> pinmux status

> pinmux status -a

> pinmux status <pin-name>
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Update the result of do_status and always returns a CMD_RET_ value
(-ENOSYS was a possible result of show_pinmux).

This patch also adds pincontrol name in error messages (dev->name)
and treats correctly the status sub command when pin-controller device is
not selected.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This change ensures both U-Boot and OP-TEE see the same content
from shared memory when OP-TEE is invoked prior U-Boot relocation.

This change is required since U-Boot may execute with data cache off
while OP-TEE always enables cache on memory shared with U-Boot.
Signed-off-by: NEtienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: NJens Wiklander <jens.wiklander@linaro.org>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>

It's possible that LOAD_FIT_FULL will have different values for TPL and
SPL, in which case just checking CONFIG_SPL_LOAD_FIT_FULL causes this to
be compiled in to the TPL even though functions and struct members it
depends on are not.

Use CONFIG_IS_ENABLED() to ensure the correct TPL/SPL variant is
checked.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The result of dpio_close() is actually taken into account.
Signed-off-by: NCosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com>
Reviewed-by: NRamon Fried <rfried.dev@gmail.com>

Change the reg variable to not be unsigned so that we not get into an
unsigned compared against 0.
Signed-off-by: NCosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com>
Reviewed-by: NRamon Fried <rfried.dev@gmail.com>

Define LOG_CATEGORY to allow filtering with log command.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NRamon Fried <rfried.dev@gmail.com>

Define LOG_CATEGORY to allow filtering with log command.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NRamon Fried <rfried.dev@gmail.com>

Define LOG_CATEGORY to allow filtering with log command.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NRamon Fried <rfried.dev@gmail.com>