Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

CONFIG_DFU_NAND needs the raw NAND core being compiled.

Also fix the colibri_vf defconfig to reflect this dependency.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Enabling TFABOOT configuration will compile-in a call to nand_read in
the boot sequence. Handle the situation by also selecting officially
the raw NAND core in this case.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>

There is no flash on this board, there is no reason to define MTD
environment variables nor UBI. Drop them from the configuration file.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NWolfgang Grandegger <wg@aries-embedded.de>

While the right Kconfig entries were selected, because of the missing
CMD_NAND symbol the raw NAND core was never compiled. Remove it from
the defconfigs otherwise the build will fail.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
[trini: Also do this on bcm11130_nand]
Signed-off-by: NTom Rini <trini@konsulko.com>

Due to previous Makefile organization, the raw NAND subdirectory was
not compiled in if CMD_NAND was not enabled. Because the Denali driver
does not compile with these boards (undefined environment offset),
remove the dependency within the defconfig over the controller driver
(was ignored anyway in the past).
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>

Let's be consistent and always declare CONFIG_MTD from the defconfig
file when needed.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

MTD support must be enabled when using mtdparts. Indeed, functions
like get_mtd_info(), get_mtd_device() and put_mtd_device() are in
drivers/mtd/mtd_uboot.c and are built only with CONFIG_MTD.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

In some files, options of CMD_NAND are selected but not the command
itself. Fix this inconsistency.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Raw NAND support must be enabled when the environment is in NAND.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

UBI must be enabled when the environment is in UBI.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

UBI must be enabled when using fastmap, reflect this is defconfigs.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

MTD must be enabled when there is a SPI NOR flash using the
SPI_FLASH_MTD config entry.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Both symbols must be enabled when there is a raw NAND driver
selected. Also enable them when CONFIG_CMD_NAND is selected to avoid
breaking things when we'll further rework the MTD dependency
description.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>
[trini: Rebase and migrate a few more boards here]
Signed-off-by: NTom Rini <trini@konsulko.com>

Like in Linux, just use CONFIG_MTD to compile the MTD stack.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

CONFIG_MTD must be reserved for the MTD core. Like any other
subsystem, prefix the symbol by DM when it comes to DM support.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>
[trini: Add Kconfig files]
Signed-off-by: NTom Rini <trini@konsulko.com>

Add more clarity by changing the Kconfig entry name.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@bootlin.com>

Defconfig is pointing to incorrect DT file which needs to be fix.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This adds a general board file based on MT8518 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8518 eMMC board.
Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: NTom Rini <trini@konsulko.com>

In order to further prepare for full device tree support in SPL,
this patch enables both SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE.
Both of these are already enabled in U-Boot, so SPL will have
the same functionality
Signed-off-by: NAdam Ford <aford173@gmail.com>
Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>

Driver model requires a malloc pool to allocate memory before
relocations to operate serial and some other devices.  This patch
increases the pool size to 2K.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>

In preparation to use full device tree support, SPL can separate
BSS from text region.

This patch enables SPL_SEPARATE_BSS.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>

This converts the following to Kconfig:
   CONFIG_SYS_CORTINA_FW_IN_MMC
   CONFIG_SYS_CORTINA_FW_IN_NAND
   CONFIG_SYS_CORTINA_FW_IN_NOR
   CONFIG_SYS_CORTINA_FW_IN_REMOTE
   CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_PHY_CORTINA
Signed-off-by: NTom Rini <trini@konsulko.com>

There are currently no known users of this functionality on this
platform, disable it to prepare for additional VxWorks functionality
that would cause this platform to fail to link.

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NSoeren Moch <smoch@web.de>

The deadline for migration to CONFIG_DM is v2020.01. The VCT
baords would need an almost complete rewrite of all drivers to
support driver model.

Unless someone has access to the hardware and volunteers to do the migration,
the board should be scheduled for removal.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: NStefan Roese <sr@denx.de>

Since at least some of the drivers relevant to LS1028A are now following
DM, it's useful to have dm command enabled by default.
Signed-off-by: NAlex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Define CONFIG_ENV_SECT_SIZE as 0x20000 in lx2160a related defconfigs:
lx2160ardb_tfa_defconfig, lx2160ardb_tfa_SECURE_BOOT_defconfig,
lx2160aqds_tfa_defconfig, lx2160aqds_tfa_SECURE_BOOT_defconfig
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>

LS1028A QDS board supports multiple combinations of SerDes protocols and
multiple add-on cards with Ethernet PHYs.  Some of them require specific
configuration in Linux DT, and the plan is to use DT overlays for them.
Signed-off-by: NAlex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Add read for OTP and PMIC NVM with alternates
on virtual DFU device.

Serie-cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Activate the support of SPI NAND in stm32mp1 U-Boot.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

Add support of DFU for MMC, MTD, RAM and MTD command.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>

This patch allows to fix the following compilation warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@st.com>

Enable the support of function keys on the USB keyboard. This is necessary
to test the USB keyboard driver.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Enable eSDHC device module for T4240RDB board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable eSDHC device module for T2080RDB board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable eSDHC device module for T1042D4RDB board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable eSDHC device module for T1024RDB board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable eSDHC device module for P5040DS board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

Enable eSDHC device module for P4080DS board
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>