Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_CORTINA_FW_IN_MMC
   CONFIG_SYS_CORTINA_FW_IN_NAND
   CONFIG_SYS_CORTINA_FW_IN_NOR
   CONFIG_SYS_CORTINA_FW_IN_REMOTE
   CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
Signed-off-by: NTom Rini <trini@konsulko.com>

configs/T2080RDB_NAND_defconfig

@@ -63,6 +63,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_NAND=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y

configs/T2080RDB_SDCARD_defconfig

@@ -60,6 +60,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_MMC=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y

configs/T2080RDB_SPIFLASH_defconfig

@@ -63,6 +63,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y

configs/T2080RDB_SRIO_PCIE_BOOT_defconfig

@@ -36,6 +36,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_REMOTE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_MII=y

drivers/net/phy/Kconfig

@@ -100,6 +100,28 @@ config PHY_BROADCOM
 config PHY_CORTINA
 	bool "Cortina Ethernet PHYs support"
 
+choice
+	prompt "Location of the Cortina firmware"
+	default SYS_CORTINA_FW_IN_NOR
+	depends on PHY_CORTINA
+
+config SYS_CORTINA_FW_IN_MMC
+	bool "Cortina firmware in MMC"
+
+config SYS_CORTINA_FW_IN_NAND
+	bool "Cortina firmware in NAND flash"
+
+config SYS_CORTINA_FW_IN_NOR
+	bool "Cortina firmware in NOR flash"
+
+config SYS_CORTINA_FW_IN_REMOTE
+	bool "Cortina firmware in remote device"
+
+config SYS_CORTINA_FW_IN_SPIFLASH
+	bool "Cortina firmware in SPI flash"
+
+endchoice
+
 config PHY_DAVICOM
 	bool "Davicom Ethernet PHYs support"
 

include/configs/T208xRDB.h

@@ -502,7 +502,6 @@ unsigned long get_board_ddr_clk(void);
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR		0x110000
 #define CONFIG_CORTINA_FW_ADDR		0x120000
 
@@ -512,12 +511,10 @@ unsigned long get_board_ddr_clk(void);
  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
 #define CONFIG_CORTINA_FW_ADDR		(512 * 0x8a0)
 
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_CORTINA_FW_IN_NAND
 #define CONFIG_SYS_FMAN_FW_ADDR		(3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_CORTINA_FW_ADDR		(4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
@@ -528,11 +525,9 @@ unsigned long get_board_ddr_clk(void);
  * slave SRIO or PCIE outbound window->master inbound window->
  * master LAW->the ucode address in master's memory space.
  */
-#define CONFIG_SYS_CORTINA_FW_IN_REMOTE
 #define CONFIG_SYS_FMAN_FW_ADDR		0xFFE00000
 #define CONFIG_CORTINA_FW_ADDR		0xFFE10000
 #else
-#define CONFIG_SYS_CORTINA_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
 #define CONFIG_CORTINA_FW_ADDR		0xEFE00000
 #endif

include/configs/T4240RDB.h

@@ -548,7 +548,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_VITESSE
-#define CONFIG_SYS_CORTINA_FW_IN_NOR
 #define CONFIG_CORTINA_FW_ADDR		0xefe00000
 #define CONFIG_CORTINA_FW_LENGTH	0x40000
 #define CONFIG_PHY_TERANETICS

include/configs/ls2080ardb.h

@@ -560,7 +560,6 @@ unsigned long get_board_sys_clk(void);
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
-#define	CONFIG_SYS_CORTINA_FW_IN_NOR
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_CORTINA_FW_ADDR		0x20980000
 #else

scripts/config_whitelist.txt

@@ -1918,11 +1918,6 @@ CONFIG_SYS_CMXFCR_VALUE2
 CONFIG_SYS_CMXFCR_VALUE3
 CONFIG_SYS_CORE_SRAM
 CONFIG_SYS_CORE_SRAM_SIZE
-CONFIG_SYS_CORTINA_FW_IN_MMC
-CONFIG_SYS_CORTINA_FW_IN_NAND
-CONFIG_SYS_CORTINA_FW_IN_NOR
-CONFIG_SYS_CORTINA_FW_IN_REMOTE
-CONFIG_SYS_CORTINA_FW_IN_SPIFLASH
 CONFIG_SYS_CPC_REINIT_F
 CONFIG_SYS_CPLD_AMASK
 CONFIG_SYS_CPLD_BASE