This converts the following to Kconfig:
   CONFIG_CMD_SCSI

Also update the Makefile to use CONFIG_CMD_SCSI instead of CONFIG_SCSI to
enable the command, fixing an earlier error.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
[trini: Rework to default y if SCSI, drop cl-som-am57x which did not use
CMD_SCSI for real]
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_CMD_SAVES
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This is no-longer used. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_REISER
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This patch converts CONFIG_CMD_REGINFO to Kconfig
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Convert this option and enable it in sandbox. Also correct a bug which
was introduced with the block-device driver model conversion.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This command is not used by any board. It also looks quite similar to the
'iod' and 'iow' commands which use the correct I/O macros.

Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_PCMCIA
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This driver is not used by any board. Drop it.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This option enables the 'pci enum' command. It is only enabled by a few
board and these have not yet been converted to driver model, which always
enables this command. It seems easiest to just remove this option.

The affected boards can be converted to use driver model for PCI if
needed.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_PCI
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

It does not seem worth having an option to enable another sub-command in
this legacy driver. Drop this option so that the sub-command is always
available.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_PCA953X
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_ONENAND
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_MTDPARTS_SPREAD
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
[trini: Make this a bool not a string]
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_CMD_MMC_SPI
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

These are currently not quite in alphabetical order. Before adding more,
sort them.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Suggested-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This is not actually used in U-Boot. Most likely it means
CONFIG_CMD_MEMORY so change all occurences to that.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This converts the following to Kconfig:
   CONFIG_CMD_MAX6957
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

Traditional KS2 devices supported NAND via the AEMIF peripheral. However,
66AK2G doesn't use the AEMIF but rather the GPMC for NAND. Therefore,
clarify some statements to indicate only certain devices have AEMIF and
in other places just say NAND instead of AEMIF NAND
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Acked-by: NRoger Quadros <rogerq@ti.com>

commit f1896c45: spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN
introduced independent SYS_MALLOC_F_LEN for SPL and U-Boot.

Use it on the smartweb board, as above commit broke
the smartweb board.
Signed-off-by: NHeiko Schocher <hs@denx.de>

The 512 MB DDR version of SOM's use CS0 and CS1.  CS1 is not correctly
setup in the pin muxing.  This causes erratic behavior on suspend/resume

This fix has been tested on both 256 and 512 MB DDR versions.
Signed-off-by: NAdam Ford <aford173@gmail.com>

The 'tests' target will run sandbox, sandbox_spl and sandbox_flattree in
test.py and in the case of sandbox_spl ensure that we just run the
specific tests for that build.  Update our matrix to perform similar
test.py runs.
Signed-off-by: NTom Rini <trini@konsulko.com>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

Allow sending restart conditions upon direction change as this is
required by some chips.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: NHeiko Schocher <hs@denxx.de>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_OMAP24XX
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Set BM poll size once during priv probe and do not
overwrite it during port probe procedure. Pool is common for
all CP ports.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

TX drain in transmit procedure could cause issues due
to race between drain procedure and transmition of descriptor
between AGGR TXQ and physical TXQ.
TXQ will be cleared before moving to Linux by stop procedure.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

MVPP22 driver support 64 Bit arch and require BM pool
high address configuration.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Remove IRQ configuration from U-Boot PP driver.
U-Boot don't use interrupts and configuration of IRQ in U-Boot
caused crashes in Linux shared interrupt mode.
Also interrupt use is redundant in RX routine since a single RX
queue is used.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

MBUS driver were replaced by AXI in PPv22 and relevant
only for PPv21.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

U-boot use single physical tx queue with size 16 descriptors.
So aggregated tx queue size should be equal to physical tx queue
and cpu descriptor chunk(number of descriptors delivered from
physical tx queue to aggregated tx queue by one chunk) shouldn't be
larger than physical tx queue.

Fix:
Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as
physical TXQ.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NNadav Haklai <nadavh@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Issue:
BM counters were overrun by probe that called per Network interface and
caused release of wrong number of buffers during remove procedure.

Fix:
Use probe_done and num_ports to call init and remove procedure
once per communication controller.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch enables padding of packets shorter than 64B in TX(set by default).
Disabling of padding causes crashes on MACCIATO board.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

A8K marvell SoC has two South Bridge communication controllers(CP0 and CP1).
Each communication controller has packet processor ports and MDIO.
On MACHIATOBin board ports from CP1 are connected to mdio on CP0.

Issue:
Wrong base address is assigned to MDIO interface during probe.

Fix:
Get MDIO address from PHY handler parent base address.

This should be refined in the future when MDIO driver is implemented.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch add GPIO configuration support in mvpp2x driver.
Driver will handle 10G SFP gpio reset and SFP TX disable. GPIO pins should
be set in device tree.
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Tested-by: NiSoC Platform CI <ykjenk@marvell.com>
Reviewed-by: NKostya Porotchkin <kostap@marvell.com>
Reviewed-by: NIgal Liberman <igall@marvell.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Increase env sector size from 64kb to 256kb for qspi boot.
Signed-off-by: NSantan Kumar <santan.kumar@nxp.com>
Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>