Modify exports.h to remove its dependencies on other files, thus
enabling standalone apps to require only exports.h from the U-Boot
source tree.  This appears to be the intent based on the following
note: http://lists.denx.de/pipermail/u-boot/2010-January/067174.htmlSigned-off-by: NMike Partington <mparting@lexmark.com>

Signed-off-by: NThomas Weber <weber@corscience.de>

* 'agust@denx.de' of git://git.denx.de/u-boot-staging:
  Makefile: add tools/mkenvimage to target 'clean'
  mv_common.c: get rid of 'defined but not used' warning
  m68k: fix ambiguous bit testing
  sparc: fix unknown escape sequence warnings
  sparc: fix unused variable warnings
  sf: fix erase debug output

Fix:
menu.c: In function 'menu_item_print':
menu.c:91: warning: passing argument 1 of 'putc' makes integer from
pointer without a cast
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NHeiko Schocher <hs@denx.de>
Tested-by: NHeiko Schocher <hs@denx.de>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>

Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: NStefan Roese <sr@denx.de>

Fix:
flash.c: In function 'flash_erase_1':
flash.c:425:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:834:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: NStefan Roese <sr@denx.de>

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: NStefan Roese <sr@denx.de>

FTPCI100 is a SoC PCI componenet of Faraday company.
Which is usually built into SoC chips for providing
embedded PCI functions.
Signed-off-by: NGavin Guo <gavinguo@andestech.com>
Signed-off-by: NMacpaul Lin <macpaul@andestech.com>

This adds support for the SMSC LAN87xx PHYs.

Following PHYs can be used by set CONFIG_PHY_SMSC to config.
 - SMSC LAN8700
 - SMSC LAN8710/LAN8720
 - SMSC LAN8710/LAN8720

A setup of PHY was copied from linux kenrel.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Fixed white space errors; modified commit message a bit.
Signed-off-by: NWolfgang Denk <wd@denx.de>

This fixes the following warning with gcc 4.4.3.

aisimage.c: In function 'aisimage_generate':
aisimage.c:365: warning: 'tsize' may be used uninitialized in this function
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix:
mvgbe.c: In function 'mvgbe_send':
mvgbe.c:555:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
mvgbe.c: In function 'mvgbe_recv':
mvgbe.c:640:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-By: NPrafulla Wadaskar <prafulla@marvell.com>

Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>

Commit deb5ca80 "disk: part_efi: fix
**pgpt_pte == NULL" modified the code to pass "&gpt_head" to
is_gpt_valid() rather than the previous "gpt_head". However, gpt_head
is a pointer to the buffer, not the actual buffer, since it was allocated
using ALLOC_CACHE_ALIGN_BUFFER. This caused is_gpt_valid() to read the
disk block onto the stack rather than into the buffer, causing the
code to fail.

This change reverts that portion of the commit mentioned above.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Tested-by: NAnton Staaf <robotboy@chromium.org>

We want to move everything to phylib, and we definitely don't want
new drivers using the miiphy infrastructure.
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The original m88e1111s_config() does not do the SGMII mode
initialization and is buggy. Rewrite the function according to
3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: NHorst Kronstorfer <hkronsto@frequentis.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>

When CONFIG_ENV_IS_NOWHERE, got following warning:
mv_common.c:32:14: warning: 'entries_to_keep' defined but not used.
Get rid of this warning.
Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de>
Acked-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>

Building for some m68k boards results in the warning:

cpu_init.c: In function 'cpu_init_f':
cpu_init.c:287: warning: suggest parentheses around
	operand of '!' or change '&' to '&&' or '!' to '~'
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

I don't know what exactly the code was going for, but the object code
is the same before/after my change, and in looking at the env strings,
this seems to be OK.

Otherwise gcc warns:
cc1: warning: unknown escape sequence: '\$'
cc1: warning: unknown escape sequence: '\)'
cc1: warning: unknown escape sequence: '\040'
cc1: warning: unknown escape sequence: '\$'
cc1: warning: unknown escape sequence: '\)'
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Fix the build warnings:
board.c: In function 'board_init_f':
board.c:179:8: warning: unused variable 'e'
board.c:178:6: warning: unused variable 'i'
board.c:173:13: warning: unused variable 'cmdtp'
bootm.c: In function 'do_bootm_linux':
bootm.c:101:28: warning: unused variable 'kernend'
bootm.c:101:15: warning: unused variable 'initrd_addr'
bootm.c:100:26: warning: unused variable 'checksum'
bootm.c:100:21: warning: unused variable 'len'
bootm.c:100:15: warning: unused variable 'data'
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We want to show the length, so multiplying by sector size makes no sense.
This is a hold over from the erase code before the big refactor.
Signed-off-by: NVadim Bendebury <vbendeb@chromium.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* 'marek.vasut@gmail.com' of git://git.denx.de/u-boot-staging:
  tools/os_support: add OS X Lion support
  board/esd/dasa_sim/flash.c: Fix GCC 4.6 warning
  board/esd/common/xilinx_jtag_micro.c: Fix GCC 4.6 warning

OS X Lion's c-library implements getline(), therefore prevent including the old
helper implementation for __DARWIN_C_LEVEL < 200809L.

Without this patch following error occours:

---8<---
In file included from os_support.h:32,
                 from img2srec.c:55:
getline.h:1: error: conflicting types for ‘getline’
/usr/include/stdio.h:449: error: previous declaration of ‘getline’ was
here
--->8---
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

The ecovec board has SH7724, 256MB DDR2-SDRAM, USB,
Ethernet, and more.

This patch supports the following functions:
	- 256MB DDR2-SDRAM
	- USB
	- I2C
	- Ethernet
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The new sh_eth driver uses the phy driver. So, this patch enables it.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The new sh_eth driver uses the phy driver. So, this patch enables it.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Recent builds for SH4 boards fail with a lot of errors like:
	cmd_mem.o: In function 'dcache_invalid_range':
	include/asm/cache.h:25: multiple definition of 'dcache_invalid_range'
	include/asm/cache.h:25: first defined here

This is due to the funcs being defined in the header, but not static
or inline or extern.  So move them to the sh4-specific cache.c file.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

When DDR-ECC is effective, the physical memory which can be used
reduces this boardby half. However, this mode can chenge to disable.
When it was disabled, user can use 512 MB of physical memory.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>
Acked-by: N"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The ashrsi3 function is used by some commands that aren't in SH2A
default configs (e.g. JFFS2).

The ashrsi3.S file has been copied from Linux.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Not all SuperH toolchains support -mno-fdpic.  Chances are good that if
the flag doesn't work, it isn't defaulting to the FDPIC ABI, so the flag
isn't needed.  So only add it if it is actually supported.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The new sh_eth driver uses the phy driver. So, this patch enables it.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The sh_eth driver had an own mii functions. However the function
didn't support the gigabit PHY. The U-Boot has the general phy driver
and miiphybb driver, and they already support it.
So this patch removes the own functions and uses the phy driver.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

* 'master' of ssh://gemini/home/wd/git/u-boot/master:
  board/emk/top860/top860.c: Fix GCC 4.6 build warning
  board/sbc405/strataflash.c: Fix GCC 4.6 build warning
  arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning
  board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warning
  board/mpl/common/flash.c: Fix GCC 4.6 build warning
  post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning
  drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning
  board/sandburst/common/flash.c: Fix GCC 4.6 build warning
  DB64460: Fix GCC 4.6 build warnings
  DB64360: Fix GCC 4.6 build warnings
  board/cray/L1/flash.c: Fix GCC 4.6 build warning
  drivers/block/sata_dwc.c: Fix GCC 4.6 build warning
  board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning
  alpr board: Fix GCC 4.6 build warnings
  image: Don't detect XIP images as overlapping.
  image: Implement IH_TYPE_KERNEL_NOLOAD
  ppc4xx: Add Io64 board support
  ppc4xx: fix PMC440 painit command
  ppc4xx: remove invalid access to PCI_BRDGOPT2 register
  ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation
  mpc85xx: support for Freescale COM Express P2020
  arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning
  mpc85xx: support board-specific reset function
  powerpc/85xx: verify the localbus device tree address before booting the OS
  mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification
  powerpc/p3060qds: Add board related support for P3060QDS platform
  powerpc/85xx: clean up and document the QE/FMAN microcode macros
  powerpc/85xx: always implement the work-around for Erratum SATA_A001
  powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h
  powerpc/85xx: Add workaround for erratum A-003474
  powerpc/85xx: fixup flexcan device tree clock-frequency
  powerpc/85xx: Add workaround for erratum CPU-A003999
  x86: Fix some bugs in the i8402 driver when no controller is present
  x86: Make the i8042 driver checkpatch clean
  x86: Wrap small helper functions from libgcc to avoid an ABI mismatch
  x86: Import the glibc memset implementation
  x86: Fix a few recently added bugs
  x86: Don't relocate symbols which point to things that aren't relocated
  x86: Fix how the location of the realmode and bios blobs are calculated
  x86: Misc cleanups
  x86: Misc PCI touchups
  x86: Ensure IDT and GDT remain 16-byte aligned post relocation
  x86: Provide more configuration granularity
  x86: Add multiboot header
  sc520: Create arch asm-offsets
  x86: Punt cold- and warm-boot flags
  cosmetic: checkpatch cleanup of board/eNET/*.c
  cosmetic: checkpatch cleanup of arch/x86/lib/*.c
  cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.c
  cosmetic: checkpatch cleanup of arch/x86/cpu/*.c
  x86: Call hang() on unrecoverable exception
  menu.c: use puts() instead of printf() where possible
  MAKEALL: drop obsolete mx31pdk_nand target
  dataflash: fix parameters order in write_dataflash()
  hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines
  davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board
  davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board
  arm: a320evb: define mach-type in board config file
  OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that.
  Fix Stelian's email address
  DIU: 1080P and 720P support
  CFB: Fix font rendering on mx5 framebuffer

Fix:
top860.c: In function 'initdram':
top860.c:90:11: warning: variable 'j' set but not used
[-Wunused-but-set-variable]

Note: No attempts were made to convert this file completely to using
I/O accessors. This is left as an exercise for the board maintainer.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>

Fix:
strataflash.c: In function 'flash_write_cfiword':
strataflash.c:673:11: warning: variable 'ctladdr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: NWolfgang Denk <wd@denx.de>
Acked-by: NMarek Vasut <marek.vasut@gmail.com>