drivers/sysreset: group sysreset drivers

Create drivers/sysreset and move sysreset-uclass and all sysreset
drivers there.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

arch/arm/mach-rockchip/rk3036/Makefile

@@ -5,7 +5,6 @@
 #
 
 ifndef CONFIG_SPL_BUILD
-obj-y += reset_rk3036.o
 obj-y += syscon_rk3036.o
 endif
 

arch/arm/mach-rockchip/rk3288/Makefile

@@ -5,6 +5,5 @@
 #
 
 obj-y += clk_rk3288.o
-obj-y += reset_rk3288.o
 obj-y += sdram_rk3288.o
 obj-y += syscon_rk3288.o

arch/arm/mach-rockchip/rk3399/Makefile

@@ -5,5 +5,4 @@
 #
 
 obj-y += rk3399.o
-obj-y += reset_rk3399.o
 obj-y += syscon_rk3399.o

arch/arm/mach-snapdragon/Makefile

@@ -6,4 +6,3 @@
 
 obj-y += clock-apq8016.o
 obj-y += sysmap-apq8016.o
-obj-y += reset.o

drivers/Kconfig

@@ -68,6 +68,8 @@ source "drivers/spi/Kconfig"
 
 source "drivers/spmi/Kconfig"
 
+source "drivers/sysreset/Kconfig"
+
 source "drivers/thermal/Kconfig"
 
 source "drivers/timer/Kconfig"

drivers/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
 obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
-obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
@@ -59,6 +59,7 @@ obj-$(CONFIG_X86) += pch/
 obj-y += rtc/
 obj-y += sound/
 obj-y += spmi/
+obj-y += sysreset/
 obj-y += timer/
 obj-y += tpm/
 obj-y += twserial/

drivers/misc/Kconfig

@@ -121,15 +121,6 @@ config PCA9551_I2C_ADDR
 	help
 	  The I2C address of the PCA9551 LED controller.
 
-config SYSRESET
-	bool "Enable support for system reset drivers"
-	depends on DM
-	help
-	  Enable system reset drivers which can be used to reset the CPU or
-	  board. Each driver can provide a reset method which will be called
-	  to effect a reset. The uclass will try all available drivers when
-	  reset_walk() is called.
-
 config WINBOND_W83627
 	bool "Enable Winbond Super I/O driver"
 	help

drivers/misc/Makefile

@@ -27,7 +27,6 @@ obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
 obj-$(CONFIG_NS87308) += ns87308.o
 obj-$(CONFIG_PDSP188x) += pdsp188x.o
 obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
-obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
 ifdef CONFIG_DM_I2C
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
@@ -47,7 +46,6 @@ obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
 obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
 obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
 obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
-obj-$(CONFIG_SYSRESET) += sysreset-uclass.o
 obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
 obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
 obj-$(CONFIG_QFW) += qfw.o

drivers/sysreset/Kconfig

+#
+# System reset devices
+#
+
+menu "System reset device drivers"
+
+config SYSRESET
+	bool "Enable support for system reset drivers"
+	depends on DM
+	help
+	  Enable system reset drivers which can be used to reset the CPU or
+	  board. Each driver can provide a reset method which will be called
+	  to effect a reset. The uclass will try all available drivers when
+	  reset_walk() is called.
+
+endmenu

drivers/sysreset/Makefile

+#
+# (C) Copyright 2016 Cadence Design Systems Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_SYSRESET) += sysreset-uclass.o
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_ROCKCHIP_RK3036) += sysreset_rk3036.o
+endif
+obj-$(CONFIG_ROCKCHIP_RK3288) += sysreset_rk3288.o
+obj-$(CONFIG_ROCKCHIP_RK3399) += sysreset_rk3399.o
+obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
+obj-$(CONFIG_ARCH_SNAPDRAGON) += sysreset_snapdragon.o