提交 4fe629d2 编写于 作者: T Tom Rini
......@@ -7,8 +7,6 @@
#ifndef __ASM_RISCV_IO_H
#define __ASM_RISCV_IO_H
#ifdef __KERNEL__
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/byteorder.h>
......@@ -17,33 +15,6 @@ static inline void sync(void)
{
}
#ifdef CONFIG_ARCH_MAP_SYSMEM
static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
{
if (paddr < PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE)
paddr = paddr | 0x40000000;
return (void *)(uintptr_t)paddr;
}
static inline void *unmap_sysmem(const void *vaddr)
{
phys_addr_t paddr = (phys_addr_t)vaddr;
paddr = paddr & ~0x40000000;
return (void *)(uintptr_t)paddr;
}
static inline phys_addr_t map_to_sysmem(const void *ptr)
{
return (phys_addr_t)(uintptr_t)ptr;
}
#endif
/*
* Generic virtual read/write. Note that we don't support half-word
* read/writes. We define __arch_*[bl] here, and leave __arch_*w
* to the architecture specific code.
*/
#define __arch_getb(a) (*(volatile unsigned char *)(a))
#define __arch_getw(a) (*(volatile unsigned short *)(a))
#define __arch_getl(a) (*(volatile unsigned int *)(a))
......@@ -352,115 +323,6 @@ static inline void writesl(unsigned int *addr, const void *data, int longlen)
#define insw_p(port, to, len) insw(port, to, len)
#define insl_p(port, to, len) insl(port, to, len)
/*
* DMA-consistent mapping functions. These allocate/free a region of
* uncached, unwrite-buffered mapped memory space for use with DMA
* devices. This is the "generic" version. The PCI specific version
* is in pci.h
*/
/*
* String version of IO memory access ops:
*/
/*
* If this architecture has PCI memory IO, then define the read/write
* macros. These should only be used with the cookie passed from
* ioremap.
*/
#ifdef __mem_pci
#define readb(c) ({ unsigned int __v = \
__raw_readb(__mem_pci(c)); __v; })
#define readw(c) ({ unsigned int __v = \
le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
#define readl(c) ({ unsigned int __v = \
le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
#define writeb(v, c) __raw_writeb(v, __mem_pci(c))
#define writew(v, c) __raw_writew(cpu_to_le16(v), __mem_pci(c))
#define writel(v, c) __raw_writel(cpu_to_le32(v), __mem_pci(c))
#define memset_io(c, v, l) _memset_io(__mem_pci(c), (v), (l))
#define memcpy_fromio(a, c, l) _memcpy_fromio((a), __mem_pci(c), (l))
#define memcpy_toio(c, a, l) _memcpy_toio(__mem_pci(c), (a), (l))
#define eth_io_copy_and_sum(s, c, l, b) \
eth_copy_and_sum((s), __mem_pci(c), (l), (b))
static inline int check_signature(ulong io_addr, const uchar *s, int len)
{
int retval = 0;
do {
if (readb(io_addr) != *s)
goto out;
io_addr++;
s++;
len--;
} while (len);
retval = 1;
out:
return retval;
}
#endif /* __mem_pci */
/*
* If this architecture has ISA IO, then define the isa_read/isa_write
* macros.
*/
#ifdef __mem_isa
#define isa_readb(addr) __raw_readb(__mem_isa(addr))
#define isa_readw(addr) __raw_readw(__mem_isa(addr))
#define isa_readl(addr) __raw_readl(__mem_isa(addr))
#define isa_writeb(val, addr) __raw_writeb(val, __mem_isa(addr))
#define isa_writew(val, addr) __raw_writew(val, __mem_isa(addr))
#define isa_writel(val, addr) __raw_writel(val, __mem_isa(addr))
#define isa_memset_io(a, b, c) _memset_io(__mem_isa(a), (b), (c))
#define isa_memcpy_fromio(a, b, c) _memcpy_fromio((a), __mem_isa(b), (c))
#define isa_memcpy_toio(a, b, c) _memcpy_toio(__mem_isa((a)), (b), (c))
#define isa_eth_io_copy_and_sum(a, b, c, d) \
eth_copy_and_sum((a), __mem_isa(b), (c), (d))
static inline int
isa_check_signature(ulong io_addr, const uchar *s, int len)
{
int retval = 0;
do {
if (isa_readb(io_addr) != *s)
goto out;
io_addr++;
s++;
len--;
} while (len);
retval = 1;
out:
return retval;
}
#else /* __mem_isa */
#define isa_readb(addr) (__readwrite_bug("isa_readb"), 0)
#define isa_readw(addr) (__readwrite_bug("isa_readw"), 0)
#define isa_readl(addr) (__readwrite_bug("isa_readl"), 0)
#define isa_writeb(val, addr) __readwrite_bug("isa_writeb")
#define isa_writew(val, addr) __readwrite_bug("isa_writew")
#define isa_writel(val, addr) __readwrite_bug("isa_writel")
#define isa_memset_io(a, b, c) __readwrite_bug("isa_memset_io")
#define isa_memcpy_fromio(a, b, c) __readwrite_bug("isa_memcpy_fromio")
#define isa_memcpy_toio(a, b, c) __readwrite_bug("isa_memcpy_toio")
#define isa_eth_io_copy_and_sum(a, b, c, d) \
__readwrite_bug("isa_eth_io_copy_and_sum")
#define isa_check_signature(io, sig, len) (0)
#endif /* __mem_isa */
#endif /* __KERNEL__ */
#include <asm-generic/io.h>
#endif /* __ASM_RISCV_IO_H */
......@@ -35,5 +35,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
imply SMP
imply SPL_RAM_SUPPORT
imply SPL_RAM_DEVICE
imply OF_HAS_PRIOR_STAGE
endif
......@@ -26,6 +26,7 @@ static struct sbi_imp implementations[] = {
{ 3, "KVM" },
{ 4, "RustSBI" },
{ 5, "Diosix" },
{ 6, "Coffer" },
};
static struct sbi_ext extensions[] = {
......
......@@ -15,6 +15,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
......
......@@ -17,6 +17,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
......
......@@ -16,6 +16,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
......
......@@ -18,6 +18,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BINMAN_FDT is not set
CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
......
......@@ -216,8 +216,6 @@ Or if you want to use a compressed kernel image file such as Image.gz
1.2 MiB/s
done
Bytes transferred = 4809458 (4962f2 hex)
=>setenv kernel_comp_addr_r 0x90000000
=>setenv kernel_comp_size 0x500000
By this time, correct kernel image is loaded and required environment variables
are set. You can proceed to load the ramdisk and device tree from the tftp server
......
......@@ -54,10 +54,12 @@
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr_r=0x84000000\0" \
"fdt_addr_r=0x88000000\0" \
"scriptaddr=0x88100000\0" \
"pxefile_addr_r=0x88200000\0" \
"ramdisk_addr_r=0x88300000\0" \
"kernel_comp_addr_r=0x88000000\0" \
"kernel_comp_size=0x4000000\0" \
"fdt_addr_r=0x8c000000\0" \
"scriptaddr=0x8c100000\0" \
"pxefile_addr_r=0x8c200000\0" \
"ramdisk_addr_r=0x8c300000\0" \
BOOTENV
#endif
......
......@@ -61,12 +61,14 @@
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr_r=0x84000000\0" \
"fdt_addr_r=0x88000000\0" \
"scriptaddr=0x88100000\0" \
"kernel_comp_addr_r=0x88000000\0" \
"kernel_comp_size=0x4000000\0" \
"fdt_addr_r=0x8c000000\0" \
"scriptaddr=0x8c100000\0" \
"script_offset_f=0x1fff000\0" \
"script_size_f=0x1000\0" \
"pxefile_addr_r=0x88200000\0" \
"ramdisk_addr_r=0x88300000\0" \
"pxefile_addr_r=0x8c200000\0" \
"ramdisk_addr_r=0x8c300000\0" \
"type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \
"type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \
"type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
......
......@@ -56,12 +56,12 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x84000000\0" \
"fdt_addr_r=0x88000000\0" \
"scriptaddr=0x88100000\0" \
"pxefile_addr_r=0x88200000\0" \
"ramdisk_addr_r=0x88300000\0" \
"kernel_comp_addr_r=0x90000000\0" \
"kernel_comp_addr_r=0x88000000\0" \
"kernel_comp_size=0x4000000\0" \
"fdt_addr_r=0x8c000000\0" \
"scriptaddr=0x8c100000\0" \
"pxefile_addr_r=0x8c200000\0" \
"ramdisk_addr_r=0x8c300000\0" \
"type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \
"type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \
"type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册