Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4552)

A new method is added to EVP_PKEY_METH as:

    int (*check) (EVP_PKEY_CTX *ctx);

and to EVP_PKEY_ASN1_METHOD as:

    int (*pkey_check) (EVP_PKEY_CTX *ctx);

This is used to check the validity of a specific key.

The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)

return true for characters > 127.  I.e. they are allowing extended ASCII
characters through which then cause problems.  E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably.  Likewise letters with diacritical marks can also cause problems.

If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.

The implementation uses a single table with a bit for each of the defined
classes.  These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set.  They will
work for both signed and unsigned character inputs.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4069)

Added the pkey_meth_kdf_test tests which test the PKEY_METHOD macros (at
the moment, of HKDF and scrypt).
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NStephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4026)

Add missing ASN1_TIME functions

Do some cleanup of the ASN1_TIME code.
Add ASN1_TIME_normalize() to normalize ASN1_TIME structures.
Add ASN1_TIME_compare() to compare two ASN1_TIME structures.
Add ASN1_TIME_cmp_time_t() to compare an ASN1_TIME to time_t
(generic version of ASN1_UTCTIME_cmp_time_t()).

Replace '0' .. '9' compares with isdigit()
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2753)

If RAND_add wraps around, XOR with existing. Add test to drbgtest that
does the wrap-around.

Re-order seeding and stop after first success.

Add RAND_poll_ex()

Use the DF and therefore lower RANDOMNESS_NEEDED.  Also, for child DRBG's,
mix in the address as the personalization bits.

Centralize the entropy callbacks, from drbg_lib to rand_lib.
(Conceptually, entropy is part of the enclosing application.)
Thanks to Dr. Matthias St Pierre for the suggestion.

Various code cleanups:
    -Make state an enum; inline RANDerr calls.
    -Add RAND_POLL_RETRIES (thanks Pauli for the idea)
    -Remove most RAND_seed calls from rest of library
    -Rename DRBG_CTX to RAND_DRBG, etc.
    -Move some code from drbg_lib to drbg_rand; drbg_lib is now only the
     implementation of NIST DRBG.
    -Remove blocklength
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4019)

Documentation and test cases are also updated
Reviewed-by: NBen Kaduk <kaduk@mit.edu>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3783)

File::Glob::glob is deprecated, it's use generates this kind of
message:

    File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.

So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().

Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting.  This might change, but later.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)

that needed test_main now works using the same infrastructure as tests that used
register_tests.

This meant:
* renaming register_tests to setup_tests and giving it a success/failure return.
* renaming the init_test function to setup_test_framework.
* renaming the finish_test function to pulldown_test_framework.
* adding a user provided global_init function that runs before the test frame
    work is initialised.  It returns a failure indication that stops the stest.
* adding helper functions that permit tests to access their command line args.
* spliting the BIO initialisation and finalisation out from the test setup and
    teardown.
* hiding some of the now test internal functions.
* fix the comments in testutil.h
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3953)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3998)

OpenSSL already has the feature of SSL_MODE_RELEASE_BUFFERS that can
be set to release the read or write buffers when data has finished
reading or writing. OpenSSL will automatically re-allocate the buffers
as needed. This can be quite aggressive in terms of memory allocation.

This provides a manual mechanism. SSL_free_buffers() will free
the data buffers if there's no pending data. SSL_alloc_buffers()
will realloc them; but this function is not strictly necessary, as it's
still done automatically in the state machine.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2240)

Fixes: issue #3747

make SSL_CIPHER_standard_name globally available and introduce a new
function OPENSSL_cipher_name.

A new option '-convert' is also added to 'openssl ciphers' app.

Documentation and test cases are added.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3859)

Ported from the last FIPS release, with DUAL_EC and SHA1 and the
self-tests removed.  Since only AES-CTR is supported, other code
simplifications were done.  Removed the "entropy blocklen" concept.

Moved internal functions to new include/internal/rand.h.
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3789)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3858)

uitest.o depends on apps.h which depends on progs.h, which is
dynamically generated, so we need to explicitely add a dependency
between uitest.o and progs.h for the latter to be generated in time.

Fixed #3793
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3794)

This is an implementation of a BIO filter that produce TAP compatible output
for the test framework.  The current test indentation level is honoured.

The test output functions have been modified to not attempt to indent
their output and to not include the leading '#' character.

The filter is applied to bio_err only.  bio_out is left unchanged, although
tests using bio_out have been modified to use bio_err instead.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3732)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3720)

and bignums.  These have been refactored into their own file, along with
their error displays.  The formatting follows the output format used
on error, except that bignums of sixty four bits or less are displayed
in a more compact one line form.

Added a TEST_note function for producing output without file and line
information.

Update the three tests that call BN_print so they use the new test
infrastructure instead.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3655)

Because apps/progs.h isn't configuration agnostic, it's not at all
suited for 'make update' or being versioned, so change it to be
dynamically generated.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3688)

To test X509_check_private_key and relatives.

Add a CSR and corresponding RSA private key to test
X509_REQ_check_private_key function.
Signed-off-by: NPaul Yang <paulyang.inf@gmail.com>
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3614)

Standardize file:line messages
Reduce buff size; move to end of STANZA
Add some Title entries (with blank line after)
Add Title to some BN test files.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3608)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3451)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3399)

Also, allow multiple files on commandline (for future splitup of
evptests.txt)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Get some trivial test coverage that this flag does what it claims to.

[extended tests]
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)

Some refactoring done as well.

The prime_field_tests() function needs splitting and refactoring still.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3340)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3210)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3256)

ASN1_GENERALIZEDTIME and ASN1_UTCTIME may be specified using offsets,
even though that's not supported within certificates.

To convert the offset time back to GMT, the offsets are supposed to be
subtracted, not added. e.g. 1759-0500 == 2359+0100 == 2259Z.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2654)

Also added a internal error printing callback to be used both with
ERR_print_errors_cb() and with CRYPTO_mem_leaks_cb
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3345)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3345)

Also converted most of ssltestlib but left the packet_dump output
as-is (for now).
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3257)

Updated due to test framework changes
Updates after code review
Missed some checks
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3269)

Since it uses some of the apps/ stuff and some of them include e_os.h...
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3307)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3243)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3243)

It's now built as a static library, and greatly simplified for test
programs, which no longer need to include test_main_custom.h or
test_main.h and link with the corresponding object files.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3243)

This includes reworked reworked tests to do both encrypt and decrypt,
and a few more ciphers added.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3197)

X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.

Raise errors if empty or malformed files are read when loading certificates
and CRLs.

Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}

Refactor these two routines into one.

Bring the unit test for duplicate certificates up to date using the test
framework.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)