Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Traditionally Configure passed $ENV{PERL} to Makefile. But this
resulted in ambiguilty as Configure script could be executed by
interpreter different from one executing remaining scripts. Since
we separate compile- and run-time interpreters with HASHBANGPERL
variable, there is no reason to segment the build procedure.
Reviewed-by: NRich Salz <rsalz@openssl.org>

With extensive help and feedback from Richard and Andy.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath.  Unfortunately, this doesn't work
too well with asan, msan or ubsan.

So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.

This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The way we figured out what options are crypto algorithms and what are
something other was somewhat sketchy.  This change bases the
distinction on available sdirs instead.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

This reverts commit eb40eaed.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Because some targets execute perl code that might die, we risk
incomplete lists.  Make it so dying doesn't happen when we're listing
targets.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

These tests take a very long time on some platforms, and arent't
always strictly necessary.  This makes it possible to turn them
off.  The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.

RT#4665
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Build file templates would be looked up like this if the user gave us
an additional directory to look for configuration files and build file
templates:

    $OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
    $SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
    $OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
    $SOURCEDIR/Configurations/Makefile.tmpl

So for example, if the user created his own Makefile.tmpl and tried to
use it with a unixly config, it would never be user because we have a
unix-Makefile.tmpl in our Configurations directory.  This is clearly
wrong, and this change makes it look in this order instead:

    $OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
    $OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
    $SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
    $SOURCEDIR/Configurations/Makefile.tmpl
Reviewed-by: NRich Salz <rsalz@openssl.org>

We've done away with Makefile as source of information and now use
configdata.pm exclusively.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Make sure the information is kept for reconfiguration too.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The definition of STITCHED_CALL relies on OPENSSL_NO_ASM.  However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented.  Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.

For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

@disablables is sorted, but these were just added at the end of
%disabled in commits c2e27310 and 22e3dcb7.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

PROGRAM_NO_INST, ENGINES_NO_INST, SCRIPTS_NO_INST and LIBS_NO_INST are
to be used to specify program, engines, scripts and libraries that are
not to be installed in the system.  Fuzzers, test programs, that sort
of things are of the _NO_INST type, for example.

For the benefit of build file templates and other templates that use
data from configdata.pm, a new hash table $unified_info{install} is
created.  It contains a set of subhashes, one for each type of
installable, each having an array of file names as values.  For
example, it can look like this:

    "install" =>
        {
            "engines" =>
                [
                    "engines/afalg/afalg",
                    "engines/capi",
                    "engines/dasync",
                    "engines/padlock",
                ],
            "libraries" =>
                [
                    "libcrypto",
                    "libssl",
                ],
            "programs" =>
                [
                    "apps/openssl",
                ],
            "scripts" =>
                [
                    "apps/CA.pl",
                    "apps/tsget",
                    "tools/c_rehash",
                ],
        },
Reviewed-by: NRich Salz <rsalz@openssl.org>

Instead of having fuzz/build.info.fuzz magically and conditionally
included along with the other build.info files, incorporate it in
fuzz/build.info and add the conditions there instead.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL.  Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.

Note: this is only relevant for Unix-like environments.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

INCLUDE statements in build.info files were source tree centric.  That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.

This change has the INCLUDE statement consider both the source and
build tree for any include directory.  It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1245)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1241)

mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This turns these headers into build file generated ones.
Reviewed-by: NRich Salz <rsalz@openssl.org>

'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built.  It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NBen Laurie <ben@links.org>

MR: #2740

Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work.  Using the 'if' module to do so does work.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.

[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: NRichard Levitte <levitte@openssl.org>

RT#4486
Reviewed-by: NMatt Caswell <matt@openssl.org>

At earlier point 'which' was replaced with IPC::Cmd::can_run call.
Unfortunately on RPM-based systems it is a separate package and it's
not given that it's installed. Resurrected 'which' provides
poor-man fallback for IPC::Cmd::can_run.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>