Reviewed-by: NMatt Caswell <matt@openssl.org>

In non-__KERNEL__ context 32-bit-style __ARMEB__/__ARMEL__ macros were
set in arm_arch.h, which is shared between 32- and 64-bit builds. Since
it's not included in __KERNEL__ case, we have to adhere to official
64-bit pre-defines, __AARCH64EB__/__AARCH64EL__.

[If we are to share more code, it would need similar adjustment.]
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

We should use the macro for testing if we are using TLSv1.3 rather than
checking s->version directly.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Calling EVP_PKEY_CTX_new_id(curve_NID, NULL) causes an error for most
curves that are implemented through the EC low-level API, and in the
last commit we call it for every curve to avoid treating X25519 as a
special case.

Last commit code already handles correctly this failure, but does not
remove these events from the thread error queue, thus some
false-positive warnings are printed at the end of execution.

This commit ensures that the error queue is clean, without flushing
other errors.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1658)

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Both strdup or malloc failure should raise à err.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1905)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1905)

Use \b on NOEXIST and EXPORT_VAR_AS_FUNC patterns as suggested by Andy.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1912)

This reflects its position in include/openssl/ct.h.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

Otherwise, |dec| gets moved past the end of the signature by
o2i_SCT_signature and then can't be correctly freed afterwards.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

This gives better code coverage and is more representative of how a
user would likely construct an SCT (using the base64 returned by a CT log).
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)

The rationale is that the linux-x86 is the most likely config target
to evolve and should therefore be chosen when possible, while
linux-elf is mostly reserved for older Linux machines.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1924)

'linux-x86' is similar to 'linux-x86_64' but uses -m32 rather than -m64.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1924)

Reviewed-by: NRich Salz <rsalz@openssl.org>

ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.

I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

No need to continually get the list of supported curves for the client
and server. Just do it once.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Numerous style issues as well as references to TLS1_3_VERSION instead of
SSL_IS_TLS13(s)
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.

The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.

The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.

I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: NRich Salz <rsalz@openssl.org>