Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

As per permission from Google (Emilia).
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

The updated shim has the ability to skip tests using unimplemented flags.
This should reduce the number of test failures.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Move from two ifs to a single one with an &&
Reviewed-by: NRichard Levitte <levitte@openssl.org>

It was only a sanity check anyway, so isn't needed
Reviewed-by: NRichard Levitte <levitte@openssl.org>

It is no longer used (replaced with bssl:UniquePtr)
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

That way we can remove flags that we don't support
Reviewed-by: NRichard Levitte <levitte@openssl.org>

We will rely on the -allow-unimplemented feature instead.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

They were there for BoringSSL only features which are not relevant to us.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

It was just a sanity check and isn't needed
Reviewed-by: NRichard Levitte <levitte@openssl.org>

git clone has the directory name last
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This Makefile was temporary. Building ossl_shim has now been integrated into
to the build system.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Added the file README.external which describes how to build and run OpenSSL
to use the BoringSSL test suite. Also updated INSTALL to point to it.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also rename executable to cmd...otherwise it breaks!
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Use the newly added "executable" function rather than "system". Also filter
the output to add a prefix to every line so that the "ok" doesn't confuse
Test::More
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Don't build ossl_shim by default. Switch it on through
enable-external-tests.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

This just disables all tests that fail at the moment. Over time we will
want to go over these and figure out why they are failing (and fix them if
appropriate)
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Numerous conflicts resolved. rebase was against commit 490469f850.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This adds a test to the OpenSSL test suite to invoke the BoringSSL test
suite.

It assumes you have already compiled the ossl_shim (see previous commit).
It also assumes that you have an environment variable BORING_RUNNER_DIR
set up to point to the ssl/test/runner directory of a checkout of BoringSSL.

This has only been tested with a very old version of BoringSSL (from commit
f277add6c) - since that was the last known checkout where the shim compiles
successfully. Even with that version of BoringSSL this test will fail. There
are lots of Boring tests that are failing for various reasons. Some might
be due to bugs in OpenSSL, some might be due to features that BoringSSL has
that OpenSSL doesn't, some are due to assumptions about the way BoringSSL
behaves that are not true for OpenSSL etc.

To get the verbose BoringSSL test output, run like this:

VERBOSE=1 BORING_RUNNER_DIR=/path/to/boring/ssl/test/runner make \
TESTS="test_external" test
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The BoringSSL test suite contains numerous tests which OpenSSL does not.

The BoringSSL test runner uses a shim to launch the library and execute the
tests. This is a version of the BoringSSL shim converted to compile against
OpenSSL instead.

This is primarily based on the work of David Benjamin from the BoringSSL
project who did most of the necessary conversion. It also includes a few
other tweaks for opacity changes etc.

This is based on a *very* old version of BoringSSL from commit f277add6c.
That was the last commit known to work with this patched shim. Later
versions may also work but lots of merge conflicts occur when trying to
bring it up to date.

At the moment this has not been integrated into the build system. There is
a very simple standalone makefile in the ossl_shim directory which should
be executed directly before tyring to use the shim.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

test/shlibloadtest.c assumes all Unix style platforms use .so as
shared library extension.  This is not the case for Mac OS X, which
uses .dylib.  Instead of this, have the test recipe find out the
extension from configuration data.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1844)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1842)

Pre 1.1.0, 'make test' would set the environment variable
OPENSSL_DEBUG_MEMORY to "on".  This got lost when translating the old
build files to the new templates.  This changes reintroduces that
variable.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1840)

- Make sure to initialise SHLIB variables
- Make sure to make local variables static
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1838)

gcc is kinder, it silently passes quite a few flags to ld, while clang
is stricter and wants them prefixed with -Wl,
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1836)

All of these don't compile cleanly any more, probably haven't for quite
some time
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)