提交 7280a5d3 编写于 作者: R Richard Levitte

Clean away remaining 'selftest' code

All of these don't compile cleanly any more, probably haven't for quite
some time
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)
上级 59cec20e
......@@ -129,18 +129,6 @@ int PKCS5_PBKDF2_HMAC_SHA1(const char *pass, int passlen,
keylen, out);
}
# ifdef DO_TEST
main()
{
unsigned char out[4];
unsigned char salt[] = { 0x12, 0x34, 0x56, 0x78 };
PKCS5_PBKDF2_HMAC_SHA1("password", -1, salt, 4, 5, 4, out);
fprintf(stderr, "Out %02X %02X %02X %02X\n",
out[0], out[1], out[2], out[3]);
}
# endif
/*
* Now the key derivation function itself. This is a bit evil because it has
* to check the ASN1 parameters are valid: and there are quite a few of
......
......@@ -136,30 +136,3 @@ void OBJ_sigid_free(void)
sk_nid_triple_free(sigx_app);
sigx_app = NULL;
}
#ifdef OBJ_XREF_TEST
main()
{
int n1, n2, n3;
int i, rv;
# ifdef OBJ_XREF_TEST2
for (i = 0; i < OSSL_NELEM(sigoid_srt); i++) {
OBJ_add_sigid(sigoid_srt[i][0], sigoid_srt[i][1], sigoid_srt[i][2]);
}
# endif
for (i = 0; i < OSSL_NELEM(sigoid_srt); i++) {
n1 = sigoid_srt[i][0];
rv = OBJ_find_sigid_algs(n1, &n2, &n3);
printf("Forward: %d, %s %s %s\n", rv,
OBJ_nid2ln(n1), OBJ_nid2ln(n2), OBJ_nid2ln(n3));
n1 = 0;
rv = OBJ_find_sigid_by_algs(&n1, n2, n3);
printf("Reverse: %d, %s %s %s\n", rv,
OBJ_nid2ln(n1), OBJ_nid2ln(n2), OBJ_nid2ln(n3));
}
}
#endif
/*
* Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include <stdio.h>
unsigned char ebits_to_num[256] = {
0xbd, 0x56, 0xea, 0xf2, 0xa2, 0xf1, 0xac, 0x2a,
0xb0, 0x93, 0xd1, 0x9c, 0x1b, 0x33, 0xfd, 0xd0,
0x30, 0x04, 0xb6, 0xdc, 0x7d, 0xdf, 0x32, 0x4b,
0xf7, 0xcb, 0x45, 0x9b, 0x31, 0xbb, 0x21, 0x5a,
0x41, 0x9f, 0xe1, 0xd9, 0x4a, 0x4d, 0x9e, 0xda,
0xa0, 0x68, 0x2c, 0xc3, 0x27, 0x5f, 0x80, 0x36,
0x3e, 0xee, 0xfb, 0x95, 0x1a, 0xfe, 0xce, 0xa8,
0x34, 0xa9, 0x13, 0xf0, 0xa6, 0x3f, 0xd8, 0x0c,
0x78, 0x24, 0xaf, 0x23, 0x52, 0xc1, 0x67, 0x17,
0xf5, 0x66, 0x90, 0xe7, 0xe8, 0x07, 0xb8, 0x60,
0x48, 0xe6, 0x1e, 0x53, 0xf3, 0x92, 0xa4, 0x72,
0x8c, 0x08, 0x15, 0x6e, 0x86, 0x00, 0x84, 0xfa,
0xf4, 0x7f, 0x8a, 0x42, 0x19, 0xf6, 0xdb, 0xcd,
0x14, 0x8d, 0x50, 0x12, 0xba, 0x3c, 0x06, 0x4e,
0xec, 0xb3, 0x35, 0x11, 0xa1, 0x88, 0x8e, 0x2b,
0x94, 0x99, 0xb7, 0x71, 0x74, 0xd3, 0xe4, 0xbf,
0x3a, 0xde, 0x96, 0x0e, 0xbc, 0x0a, 0xed, 0x77,
0xfc, 0x37, 0x6b, 0x03, 0x79, 0x89, 0x62, 0xc6,
0xd7, 0xc0, 0xd2, 0x7c, 0x6a, 0x8b, 0x22, 0xa3,
0x5b, 0x05, 0x5d, 0x02, 0x75, 0xd5, 0x61, 0xe3,
0x18, 0x8f, 0x55, 0x51, 0xad, 0x1f, 0x0b, 0x5e,
0x85, 0xe5, 0xc2, 0x57, 0x63, 0xca, 0x3d, 0x6c,
0xb4, 0xc5, 0xcc, 0x70, 0xb2, 0x91, 0x59, 0x0d,
0x47, 0x20, 0xc8, 0x4f, 0x58, 0xe0, 0x01, 0xe2,
0x16, 0x38, 0xc4, 0x6f, 0x3b, 0x0f, 0x65, 0x46,
0xbe, 0x7e, 0x2d, 0x7b, 0x82, 0xf9, 0x40, 0xb5,
0x1d, 0x73, 0xf8, 0xeb, 0x26, 0xc7, 0x87, 0x97,
0x25, 0x54, 0xb1, 0x28, 0xaa, 0x98, 0x9d, 0xa5,
0x64, 0x6d, 0x7a, 0xd4, 0x10, 0x81, 0x44, 0xef,
0x49, 0xd6, 0xae, 0x2e, 0xdd, 0x76, 0x5c, 0x2f,
0xa7, 0x1c, 0xc9, 0x09, 0x69, 0x9a, 0x83, 0xcf,
0x29, 0x39, 0xb9, 0xe9, 0x4c, 0xff, 0x43, 0xab,
};
unsigned char num_to_ebits[256] = {
0x5d, 0xbe, 0x9b, 0x8b, 0x11, 0x99, 0x6e, 0x4d,
0x59, 0xf3, 0x85, 0xa6, 0x3f, 0xb7, 0x83, 0xc5,
0xe4, 0x73, 0x6b, 0x3a, 0x68, 0x5a, 0xc0, 0x47,
0xa0, 0x64, 0x34, 0x0c, 0xf1, 0xd0, 0x52, 0xa5,
0xb9, 0x1e, 0x96, 0x43, 0x41, 0xd8, 0xd4, 0x2c,
0xdb, 0xf8, 0x07, 0x77, 0x2a, 0xca, 0xeb, 0xef,
0x10, 0x1c, 0x16, 0x0d, 0x38, 0x72, 0x2f, 0x89,
0xc1, 0xf9, 0x80, 0xc4, 0x6d, 0xae, 0x30, 0x3d,
0xce, 0x20, 0x63, 0xfe, 0xe6, 0x1a, 0xc7, 0xb8,
0x50, 0xe8, 0x24, 0x17, 0xfc, 0x25, 0x6f, 0xbb,
0x6a, 0xa3, 0x44, 0x53, 0xd9, 0xa2, 0x01, 0xab,
0xbc, 0xb6, 0x1f, 0x98, 0xee, 0x9a, 0xa7, 0x2d,
0x4f, 0x9e, 0x8e, 0xac, 0xe0, 0xc6, 0x49, 0x46,
0x29, 0xf4, 0x94, 0x8a, 0xaf, 0xe1, 0x5b, 0xc3,
0xb3, 0x7b, 0x57, 0xd1, 0x7c, 0x9c, 0xed, 0x87,
0x40, 0x8c, 0xe2, 0xcb, 0x93, 0x14, 0xc9, 0x61,
0x2e, 0xe5, 0xcc, 0xf6, 0x5e, 0xa8, 0x5c, 0xd6,
0x75, 0x8d, 0x62, 0x95, 0x58, 0x69, 0x76, 0xa1,
0x4a, 0xb5, 0x55, 0x09, 0x78, 0x33, 0x82, 0xd7,
0xdd, 0x79, 0xf5, 0x1b, 0x0b, 0xde, 0x26, 0x21,
0x28, 0x74, 0x04, 0x97, 0x56, 0xdf, 0x3c, 0xf0,
0x37, 0x39, 0xdc, 0xff, 0x06, 0xa4, 0xea, 0x42,
0x08, 0xda, 0xb4, 0x71, 0xb0, 0xcf, 0x12, 0x7a,
0x4e, 0xfa, 0x6c, 0x1d, 0x84, 0x00, 0xc8, 0x7f,
0x91, 0x45, 0xaa, 0x2b, 0xc2, 0xb1, 0x8f, 0xd5,
0xba, 0xf2, 0xad, 0x19, 0xb2, 0x67, 0x36, 0xf7,
0x0f, 0x0a, 0x92, 0x7d, 0xe3, 0x9d, 0xe9, 0x90,
0x3e, 0x23, 0x27, 0x66, 0x13, 0xec, 0x81, 0x15,
0xbd, 0x22, 0xbf, 0x9f, 0x7e, 0xa9, 0x51, 0x4b,
0x4c, 0xfb, 0x02, 0xd3, 0x70, 0x86, 0x31, 0xe7,
0x3b, 0x05, 0x03, 0x54, 0x60, 0x48, 0x65, 0x18,
0xd2, 0xcd, 0x5f, 0x32, 0x88, 0x0e, 0x35, 0xfd,
};
main()
{
int i, j;
for (i = 0; i < 256; i++) {
for (j = 0; j < 256; j++)
if (ebits_to_num[j] == i) {
printf("0x%02x,", j);
break;
}
}
}
/*
* Copyright 1999-2016 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include <stdio.h>
#include "internal/cryptlib.h"
#include <openssl/asn1.h>
#include <openssl/conf.h>
#include <openssl/x509.h>
#include <openssl/x509v3.h>
/* Test application to add extensions from a config file */
int main(int argc, char **argv)
{
LHASH *conf;
X509 *cert;
FILE *inf;
char *conf_file;
int i;
int count;
X509_EXTENSION *ext;
X509V3_add_standard_extensions();
ERR_load_crypto_strings();
if (!argv[1]) {
fprintf(stderr, "Usage: v3conf cert.pem [file.cnf]\n");
exit(1);
}
conf_file = argv[2];
if (!conf_file)
conf_file = "test.cnf";
conf = CONF_load(NULL, "test.cnf", NULL);
if (!conf) {
fprintf(stderr, "Error opening Config file %s\n", conf_file);
ERR_print_errors_fp(stderr);
exit(1);
}
inf = fopen(argv[1], "r");
if (!inf) {
fprintf(stderr, "Can't open certificate file %s\n", argv[1]);
exit(1);
}
cert = PEM_read_X509(inf, NULL, NULL);
if (!cert) {
fprintf(stderr, "Error reading certificate file %s\n", argv[1]);
exit(1);
}
fclose(inf);
sk_pop_free(cert->cert_info->extensions, X509_EXTENSION_free);
cert->cert_info->extensions = NULL;
if (!X509V3_EXT_add_conf(conf, NULL, "test_section", cert)) {
fprintf(stderr, "Error adding extensions\n");
ERR_print_errors_fp(stderr);
exit(1);
}
count = X509_get_ext_count(cert);
printf("%d extensions\n", count);
for (i = 0; i < count; i++) {
ext = X509_get_ext(cert, i);
printf("%s", OBJ_nid2ln(OBJ_obj2nid(ext->object)));
if (ext->critical)
printf(",critical:\n");
else
printf(":\n");
X509V3_EXT_print_fp(stdout, ext, 0, 0);
printf("\n");
}
return 0;
}
/*
* Copyright 1999-2016 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include <stdio.h>
#include <openssl/asn1.h>
#include <openssl/conf.h>
#include <openssl/x509.h>
#include <openssl/x509v3.h>
int main(int argc, char **argv)
{
X509 *cert;
FILE *inf;
int i, count;
X509_EXTENSION *ext;
X509V3_add_standard_extensions();
ERR_load_crypto_strings();
if (!argv[1]) {
fprintf(stderr, "Usage v3prin cert.pem\n");
exit(1);
}
if ((inf = fopen(argv[1], "r")) == NULL) {
fprintf(stderr, "Can't open %s\n", argv[1]);
exit(1);
}
if ((cert = PEM_read_X509(inf, NULL, NULL)) == NULL) {
fprintf(stderr, "Can't read certificate %s\n", argv[1]);
ERR_print_errors_fp(stderr);
exit(1);
}
fclose(inf);
count = X509_get_ext_count(cert);
printf("%d extensions\n", count);
for (i = 0; i < count; i++) {
ext = X509_get_ext(cert, i);
printf("%s\n", OBJ_nid2ln(OBJ_obj2nid(ext->object)));
if (!X509V3_EXT_print_fp(stdout, ext, 0, 0))
ERR_print_errors_fp(stderr);
printf("\n");
}
return 0;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册