The SSL_load_client_CA_file() failed to load any CAs due to an
inccorrect assumption about the return value of lh_*_insert(). The
return value when inserting into a hash is the old value of the key.

The bug was introduced in 3c82e437.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1279)

On VMS, it's customary to have a procedure to check that the software
was installed correctly and can run as advertised.

The procedure added here is fairly simple, it checks that all
libraries are in place, that the header crypto.h is in place, and that
the command 'openssl version -a' runs without trouble.
Reviewed-by: NRich Salz <rsalz@openssl.org>

- The install top is versioned by default.  However, only the major
  version should be used.
- the default areas for certs, private keys an config files have
  changed, now all prefixed with 'OSSL$'.  This gets reflected in
  cryptlib.h.
- [.VMS]openssl_startup.com.in had some faults regarding creating
  rooted concealed logical names.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This makes it possible for script writers to lock on to a specific
version if they need to.  Note that only the major version number is
used.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Also, have the static library file names contain the pointer size when
applicable.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Also, make sure that per-file deps are included in the build, even if previous
builds have failed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't use hardcoded SSL_METHODs!
Reviewed-by: NRichard Levitte <levitte@openssl.org>

We calculate the size required for the ServerKeyExchange message and then
call BUF_MEM_grow_clean() on the buffer. However we fail to take account of
2 bytes required for the signature algorithm and 2 bytes for the signature
length, i.e. we could overflow by 4 bytes. In reality this won't happen
because the buffer is pre-allocated to a large size that means it should be
big enough anyway.

Addresses an OCAP Audit issue.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The recent merge of https://github.com/openssl/openssl/pull/1264
removed some trailing whitespace from the generated file obj_dat.h.
Unfortunately obj_dat.pl kept re-adding it.  Clean up the
script and the output it generates.

Add 'use strict / use warnings'
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Now that INCLUDE considers both the source and build trees, no need
for the rel2abs perl fragment hacks any more.
Reviewed-by: NRich Salz <rsalz@openssl.org>

INCLUDE statements in build.info files were source tree centric.  That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.

This change has the INCLUDE statement consider both the source and
build tree for any include directory.  It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1276

Fixes #1260
Reviewed-by: NMatt Caswell <matt@openssl.org>

GH: #1266

malloc(0) might return NULL and code for the old callbacks might fail,
instead just say they should allocate 1 entry.
Reviewed-by: NMatt Caswell <matt@openssl.org>

GH: #1266

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1223)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1223)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1273)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1275)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Even though it's hard to imagine, it turned out that upper half of
arguments passed to V8+ subroutine can be non-zero.

["n" pseudo-instructions, such as srln being srl in 32-bit case and
srlx in 64-bit one, were implemented in binutils 2.10. It's assumed
that Solaris assembler implemented it around same time, i.e. 2000.]
Reviewed-by: NRichard Levitte <levitte@openssl.org>

$prefix was removed as part of the DESTDIR work.  However, it was
still used to create the ENGINESDIR_dev and ENGINESDIR_dir variables,
so a restoration is needed.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1244)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1244)

Ensure things really do get cleared when we intend them to.

Addresses an OCAP Audit issue.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Remove some lingering references to removed functionality from docs.
Reviewed-by: NStephen Henson <steve@openssl.org>

Commit 361a1191 removed all ciphersuites that could support temporary
RSA keys, therefore the associated functions were removed. We should have
"no-op" compatibility macros for these.
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1267)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

When the proxy cert code was initially added, some application authors
wanted to get them verified without having to change their code, so a
check of the env var OPENSSL_ALLOW_PROXY_CERTS was added.

Since then, the use of this variable has become irrelevant, as it's
likely that code has been changed since, so it's time it gets removed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)

"configured on the local system". Whatever that means. Example that is biting
me is loopback has ::1 as an address, but the network interface is v4 only.
Reviewed-by: NRichard Levitte <levitte@openssl.org>