This is a change in ISO C11 annex F (F.10.11p1), comparision macros
can't round their arguments to their semantic type when the evaluation
format has wider range and precision. (ie. they must be consistent with
the builtin relational operators)

somehow the range 335-339 was missed when updating the file.

atomic store was lacking a barrier, which was fine for legacy arm with
no real smp and kernel-emulated cas, but unsuitable for more modern
systems. the kernel provides another "kuser" function, at 0xffff0fa0,
which could be used for the barrier, but using that would drop support
for kernels 2.6.12 through 2.6.14 unless an extra conditional were
added to check for barrier availability. just using the barrier in the
kernel cas is easier, and, based on my reading of the assembly code in
the kernel, does not appear to be significantly slower.

at the same time, other atomic operations are adapted to call the
kernel cas function directly rather than using a_cas; due to small
differences in their interface contracts, this makes the generated
code much simpler.

if a multithreaded program became non-multithreaded (i.e. all other
threads exited) while one thread held an internal lock, the remaining
thread would fail to release the lock. the the program then became
multithreaded again at a later time, any further attempts to obtain
the lock would deadlock permanently.

the underlying cause is that the value of libc.threads_minus_1 at
unlock time might not match the value at lock time. one solution would
be returning a flag to the caller indicating whether the lock was
taken and needs to be unlocked, but there is a simpler solution: using
the lock itself as such a flag.

note that this flag is not needed anyway for correctness; if the lock
is not held, the unlock code is harmless. however, the memory
synchronization properties associated with a_store are costly on some
archs, so it's best to avoid executing the unlock code when it is
unnecessary.

this is the number of realtime signals available, not the maximum
signal number or total number of signals.

they were leaving junk in the upper bits.

this was resulting in crashes in posix_spawn on mips, and would have
affected applications calling clone too. since the prototype for
__clone has it as a variadic function, it may not assume that 16($sp)
is writable for use in making the syscall. instead, it needs to
allocate additional stack space, and then adjust the stack pointer
back in both of the code paths for the parent process/thread.

These constants are not specified by POSIX, but they are in the reserved
namespace, glibc and bsd systems seem to provide them as well.
(Note that POSIX specifies -NZERO and NZERO-1 to be the limits, but
PRIO_MAX equals NZERO)

the changes were verified using various sources:
linux: include/uapi/linux/elf.h
binutils: include/elf/common.h
glibc: elf/elf.h
sysv gabi: http://www.sco.com/developers/gabi/latest/contents.html
sun linker docs: http://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf
and platform specific docs

- fixed:
EF_MIPS_* E_MIPS_* e_flags: fixed accoding to glibc and binutils

- added:
ELFOSABI_GNU for EI_OSABI entry: glibc, binutils and sysv gabi
EM_* e_machine values: updated according to linux and glibc
PN_XNUM e_phnum value: from glibc and linux, see oracle docs
NT_* note types: updated according to linux and glibc
DF_1_* flags for DT_FLAGS_1 entry: following glibc and oracle docs
AT_HWCAP2 auxv entry for more hwcap bits accoding to linux and glibc
R_386_SIZE32 relocation according to glibc and binutils
EF_ARM_ABI_FLOAT_* e_flags: added following glibc and binutils
R_AARCH64_* relocs: added following glibc and aarch64 elf specs
R_ARM_* relocs: according to glibc, binutils and arm elf specs
R_X86_64_* relocs: added missing relocs following glibc

- removed:
HWCAP_SPARC_* flags were moved to arch specific header in glibc
R_ARM_SWI24 reloc is marked as obsolete in glibc, not present in binutils
  not specified in arm elf spec, R_ARM_TLS_DESC reused its number
  see http://www.codesourcery.com/publications/RFC-TLSDESC-ARM.txt

- glibc changes not pulled in:
ELFOSABI_ARM_AEABI (bare-metal system, binutils and glibc disagrees about the name)
R_68K_* relocs for unsupported platform
R_SPARC_* ditto
EF_SH* ditto (e_flags)
EF_S390* ditto (e_flags)
R_390* ditto
R_MN10300* ditto
R_TILE* ditto

CLONE_PARENT is not necessary (CLONE_THREAD provides all the useful
parts of it) and Linux treats CLONE_PARENT as an error in certain
situations, without noticing that it would be a no-op due to
CLONE_THREAD. this error case prevents, for example, use of a
multi-threaded init process and certain usages with containers.

low latency busy poll sockets are new in linux v3.11

PTRACE_GETSIGMASK and PTRACE_SETSIGMASK were added in linux v3.11
and used by checkpoint/restore tools

the removed ARPHRD_IEEE802154_PHY was only present in the kernel api
in v2.6.31 (by accident), but it got into the glibc headers (in 2009)
and remained there since this header was not updated since then.

PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.

PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)

Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.

the value of MQ_PRIO_MAX does not fit, so it needs to use OFLOW.

unlike other archs, the mips version of clone was not doing anything
to align the stack pointer. this seems to have been the cause for some
SIGBUS crashes that were observed in posix_spawn.

msg.h was wrong for big-endian (wrong endiannness padding).
shm.h was just plain wrong (mips is not supposed to have padding).

both changes were tested using libc-test on qemu-system-mips.

the underlying problem was not incorrect sign extension (fixed in the
previous commit to this file by nsz) but that code that treats "long"
as 32-bit was copied blindly from i386 to x86_64.

now lrintl is identical to llrintl on x86_64, as it should be.

if fopen fails for a reason other than ENOENT, we must assume the
intent is that the path file be used. failure may be due to
misconfiguration or intentional resource-exhaustion attack (against
suid programs), in which case falling back to loading libraries from
an unintended path could be dangerous.

gcc did not always drop excess precision according to c99 at assignments
before version 4.5 even if -std=c99 was requested which caused badly
broken mathematical functions on i386 when FLT_EVAL_METHOD!=0

but STRICT_ASSIGN was not used consistently and it is worked around for
old compilers with -ffloat-store so it is no longer needed

the new convention is to get the compiler respect c99 semantics and when
excess precision is not harmful use float_t or double_t or to specialize
code using FLT_EVAL_METHOD

apparently gnulib requires invalid long double representations
to be handled correctly in printf so we classify them according
to how the fpu treats them: bad inf is nan, bad nan is nan,
bad normal is nan and bad subnormal/zero is minimal normal

in atanh exception handling was left to the called log functions,
but the argument to those functions could underflow or overflow.

use double_t and float_t to avoid some useless stores on x86

libc.h is only for weak_alias so include it directly where it is used

acosh(x) is invalid for x<1, acoshf tried to be clever using
signed comparisions to handle all x<2 the same way, but the
formula was wrong on large negative values.

copy the fix from i386: return -1 instead of exp2l(x)-1 when x <= -65

there were two problems:
* omitted underflow on subnormal results: exp2l(-16383.5) was calculated
as sqrt(2)*2^-16384, the last bits of sqrt(2) are zero so the down scaling
does not underflow eventhough the result is in subnormal range
* spurious underflow for subnormal inputs: exp2l(0x1p-16400) was evaluated
as f2xm1(x)+1 and f2xm1 raised underflow (because inexact subnormal result)

the first issue is fixed by raising underflow manually if x is in
(-32768,-16382] and not integer (x-0x1p63+0x1p63 != x)

the second issue is fixed by treating x in (-0x1p64,0x1p64) specially

for these fixes the special case handling was completely rewritten

only fma used these macros and the explicit union is clearer

* use new ldshape union consistently
* add ld128 support to frexpl
* simplify sqrtl comment (ld64 is not just arm)

remove STRICT_ASSIGN (c99 semantics is assumed) and use the conventional
union to prepare the scaling factor (so libm.h is no longer needed)

in lgammal don't handle 1 and 2 specially, in fma use the new ldshape
union instead of ld80 one.

* use float_t and double_t
* cleanup subnormal handling
* bithacks according to the new convention (ldshape for long double
and explicit unions for float and double)

* don't care about inexact flag
* use double_t and float_t (faster, smaller, more precise on x86)
* exp: underflow when result is zero or subnormal and not -inf
* exp2: underflow when result is zero or subnormal and not exact
* expm1: underflow when result is zero or subnormal
* expl: don't underflow on -inf
* exp2: fix incorrect comment
* expm1: simplify special case handling and overflow properly
* expm1: cleanup final scaling and fix negative left shift ub (twopk)