This is a workaround to treat * as literal * at the start of a BRE.

Ideally ^ would be treated as an anchor at the start of any BRE
subexpression and similarly $ would be an anchor at the end of any
subexpression.  This is not required by the standard and hard to do
with the current code, but it's the existing practice.  If it is
changed, * should be treated as literal after such anchor as well.

commit 7eaa76fc made * invalid at
the start of a BRE subexpression, but it should be accepted as
literal * there according to the standard.

This patch does not fix subexpressions starting with ^*.

name_from_hosts failed to account for the possibility of an address
family error from name_from_numeric, wrongly counting such a return as
success and using the uninitialized address data as part of the
results passed up to the caller.

non-matching address family entries cannot simply be ignored or
results would be inconsistent with respect to whether AF_UNSPEC or a
specific address family is queried. instead, record that a
non-matching entry was seen, and fail the lookup with EAI_NONAME of no
matching-family entries are found.

at present this is done only for consistency, since this file defines
its own a_cas_p rather than using the new generic one from atomic.h
added in commit 225f6a6b. these
definitions may however be useful if we ever need to add other
pointer-sized atomic operations.

No current ports do this, but it will be useful for porting to 64-bit ll/sc
architectures, such as mips64 and powerpc64.

this follows the principle of having the source tree layout define
build semantics. it also makes it possible for crt/$(ARCH) to define
additional installable files, which may be needed for midipix and
other future targets.

the nt32 and nt64 archs will be provided by the midipix project for
building musl on top of its posix-like syscall layer for windows. at
present the needed arch files are in a separate repository, but having
the tuple matching in the upstream configure script should make it
possible to overlay the arch files without needing any further
patching.

commit e4355bd6 moved the math asm
from external source files to inline asm, but unfortunately, all
current releases of clang use the wrong inline asm constraint codes
for float and double ("w" and "P" instead of "t" and "w",
respectively). this patch adds detection for the bug in configure,
and, for now, just disables the affected asm on broken clang versions.

in order to take advantage of the fpu in -mfloat-abi=softfp mode, the
__VFP_FP__ (presence of vfp fpu) was checked instead of checking for
__ARM_PCS_VFP (hardfloat EABI variant). however, the latter macro is
the one that's actually specified by the ABI documents rather than
being compiler-specific, and should also be checked in case __VFP_FP__
is not defined on some compilers or some configurations.

these additions were made based on scanning commit authors since the
last update, at the time of the 1.1.7 release, and adding everyone
with either substantial code contributions or a pattern of ongoing
simple patch submission.

the dynamic linker was found to hang when used as the PT_INTERP, but
not when invoked as a command. the mechanism of this failure was not
determined, but the cause is clear:

commit 5552ce52 removed the SHARED
macro, but arch/sh/crt_arch.h is still using it to choose the right
form of the crt/ldso entry point code. moving the forced definition
from rcrt1.c to dlstart.c restores the old behavior. eventually the
logic should be changed to fully remove the SHARED macro or at least
rename it to something more reasonable.

commit 80fbaac4 broke all soft-float
archs, where gcc defines __GCC_IEC_559==0 because rounding modes and
exception flags are not supported. for now, just check for
__FAST_MATH__ as an indication of broken float. this won't detect all
possible misconfigurations but it probably catches the most common
one.

commit 2f853dd6 moved the error
handling for $(ARCH) not being set such that it applied to all
targets, including clean and distclean. previously these targets
worked even in an unconfigured tree. to restore the old behavior, make
most of the makefile body conditional on $(ARCH) being set/non-empty
and produce the error via a fake "all" target in the conditional
branch for the case where $(ARCH) is empty.

prior to commit 2f853dd6 which
overhauled the makefile for out-of-tree builds, crt/*.c files were
replaceable by crt/$(ARCH)/*.s, and top-level ldso/ did not exist (its
files were under src/ldso). since then, crti.o and crtn.o have been
hard-coded as arch-specific, but none of the other files in crt/ or
ldso/ were replaceable at all.

in preparation for easy integration with midipix, which has a port of
musl to windows, it needs to be possible to override the ELF-specific
code in these files. making the same arch-replacements system work
throughout the whole source tree also improves consistency and removes
the need for some file-specific rules (crti.o and crtn.o) in the
makefile.

the reference implementation clamps rounds to [1000,999999999]. we
further limited rounds to at most 9999999 as a defense against extreme
run times, but wrongly clamped instead of treating out-of-bounds
values as an error, thereby producing implementation-specific hash
results. fixing this should not break anything since values of rounds
this high are not useful anyway.

like fputs (see commit 10a17dfb), the
message printing code for getopt assumed that fwrite only returns 0 on
failure, but it can also happen on success if the total length to be
written is zero. programs with zero-length argv[0] were affected.

commit 500c6886 introduced this
problem in getopt by fixing the fwrite behavior to conform to the
requirements of ISO C. previously the wrong expectations of the getopt
code were met by the fwrite implementation.

internally, the idiom of passing nmemb=1 to fwrite and interpreting
the return value of fwrite (which is necessarily 0 or 1) as
failure/success is fairly widely used. this is not correct, however,
when the size argument is unknown and may be zero, since C requires
fwrite to return 0 in that special case. previously fwrite always
returned nmemb on success, but this was changed for conformance with
ISO C by commit 500c6886.

some software simply uses static_assert if the macro is defined, and
this breaks if the compiler does not recognize the _Static_assert
keyword used to define it.

commit 378f8cb5 added these functions
(as stubs) but left them without declarations. this broke some
autoconf based software that detected linkability of the symbols but
didn't check for a declaration.

when the size argument was zero but nmemb was nonzero, these functions
were returning nmemb, despite no data having been written.
conceptually this is not wrong, but the standard requires a return
value of zero in this case.

as specified, the int argument providing the character to write is
converted to type unsigned char. for the actual write to buffer,
conversion happened implicitly via the assignment operator; however,
the logic to check whether the argument was a newline used the
original int value. thus usage such as putchar('\n'+0x100) failed to
produce a flush.

when a write error occurred while flushing output due to a newline,
fwrite falsely reported all bytes up to and including the newline as
successfully written. in general, due to buffering such "spurious
success" returns are acceptable for stdio; however for line-buffered
mode it was subtly wrong. errors were still visible via ferror() or as
a short-write return if there was more data past the newline that
should have been written, but since the contract for line-buffered
mode is that everything up through the newline be written out
immediately, a discrepency was observable in the actual file contents.

the workaround was for a bug that botched .gpword references to local
labels, applying a nonsensical random offset of -0x4000 to them.

this reverses commit 5e396fb9 and a
removes a similar hack that was added to syscall_cp.s in the later
commit 756c8af8. it turns out one
additional instance of the same idiom, the GETFUNCSYM macro in
arch/mips/reloc.h, was still affected by the assembler bug and does
not admit an easy workaround without making assumptions about how the
macro is used. the previous workarounds made static linking work but
left the early-stage dynamic linker broken and thus had limited
usefulness.

instead, affected users (using binutils versions older than 2.20) will
need to fix the bug on the binutils side; the trivial patch is commit
453f5985b13e35161984bf1bf657bbab11515aa4 in the binutils-gdb
repository.

the old __cp_cancel code path loaded the address of __cancel from the
GOT using the $gp register, which happened to be set to point to the
correct GOT by the calling C function, but there is no ABI requirement
that this happen. instead, go the roundabout way and compute the
address of __cancel via pc-relative and gp-relative addressing
starting with a fake return address generated by a bal instruction,
which is the same trick crt1 uses to bootstrap.

not only is pthread_kill expensive in this case; it also breaks
testing under qemu app-level emulation.

add aarch64 and or1k archs, upgrade sh from experimental, and note
that sh now supports the FDPIC ABI.

the old advice on compiler versions was outdated and more specific
than made sense. presence of compiler bugs varies a lot by arch, so
it's hard to make any good recommendations beyond "recent". if we want
to document specific known-good/bad compiler versions, a much larger
section in the documentation than what's appropriate for the INSTALL
file would be needed.

the linux man page specifies malloc_usable_size(0) to return 0 and
this is the semantics other implementations follow (jemalloc).
reported by Alexander Monakov.

10k elements stack is increased to 1000k, otherwise tnfa creation fails
for reasonable sized patterns: a single literal char can add 7 elements
to this stack, so regcomp of an 1500 char long pattern (with only litral
chars) fails with REG_ESPACE. (the new limit allows about < 150k chars,
this arbitrary limit allows most command line regex usage.)

ideally there would be no upper bound: regcomp dynamically reallocates
this buffer, every reallocation checks for allocation failure and at
the end this stack is freed so there is no reason for special bound.
however that may have unwanted effect on regcomp and regexec runtime
so this is a conservative change.

"Q" input constraint was used for the written object, instead of "=Q"
output constraint.  this should not cause problems because "memory"
is on the clobber list, but "=Q" better documents the intent and more
consistent with the actual asm code.

this changes the generated code, because different registers are used,
but other than the register names nothing should change.

previous work overhauling the dynamic linker made it so that linking
libc with -Bsymbolic-functions was no longer mandatory, but the
configure logic that forced --disable-shared when ld failed to accept
the option was left in place.

this commit removes the hard-coded -Bsymbolic-functions from the
Makefile and changes the configure test to one that simply adds it to
the auto-detected LDFLAGS on success.

GDB is looking for a pointer to the ldso debug info in the data of the
..rld_map section.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>

These are undefined escape sequences by the standard, but often
used in sed scripts.

The goto logic was hard to follow and modify. This is
in preparation for the BRE \+ and \? support.

The standard does not define semantics for \| in BRE, but some code
depends on it meaning alternation. Empty alternative expression is
allowed to be consistent with ERE.

Based on a patch by Rob Landley.