commit 1bcdaeee introduced the
regression.

n32 and n64 ABIs add new argument registers vs o32, so that passing on
the stack is not necessary, so it's not clear why the 5- and
6-argument versions were special-cased to begin with; it seems to have
been pattern-copying from arch/mips (o32).

i've treated the new argument registers like the first 4 in terms of
clobber status (non-clobbered). hopefully this is correct.

this cleans up what had become widespread direct inline use of "GNU C"
style attributes directly in the source, and lowers the barrier to
increased use of hidden visibility, which will be useful to recovering
some of the efficiency lost when the protected visibility hack was
dropped in commit dc2f368e, especially
on archs where the PLT ABI is costly.

most of the found naming differences don't matter to musl, because
internally it unifies the syscall names that vary across targets,
but for external code the names should match the kernel uapi.

aarch64:
	__NR_fstatat is called __NR_newfstatat in linux.
	__NR_or1k_atomic got mistakenly copied from or1k.
arm:
	__NR_arm_sync_file_range is an alias for __NR_sync_file_range2
	__NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux,
	the old non-arm name is kept too, it should not cause issues.
	(powerpc has similar nonstandard fadvise and it uses the
	normal name.)
i386:
	__NR_madvise1 was removed from linux in commit
	303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11
microblaze:
	__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite
	had different name in linux.
mips:
	__NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select
	had different name in linux.
mipsn32:
	__NR_fstatat is called __NR_newfstatat in linux.
or1k:
	__NR__llseek is called __NR_llseek in linux.
	the old name is kept too because that's the name musl uses
	internally.
powerpc:
	__NR_{get,set}res{gid,uid}32 was never present in powerpc linux.
	__NR_timerfd was briefly defined in linux but then got renamed.

at one point, clang reportedly failed to support the asm register
constraints needed for inline syscalls. versions of clang that old
have much bigger problems that preclude using them to compile musl
libc.

based on patch submitted by Jaydeep Patil, with minor changes.

vdso support is available on mips starting with kernel 4.4, see kernel
commit a7f4df4e21 "MIPS: VDSO: Add implementations of gettimeofday()
and clock_gettime()" for details.

In Linux kernel 4.4.0 the mips code returns -ENOSYS in case it can not
handle the vdso call and assumes the libc will call the original
syscall in this case. Handle this case in musl. Currently Linux kernel
4.4.0 handles the following types: CLOCK_REALTIME_COARSE,
CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME and CLOCK_MONOTONIC.

commit 8a8fdf63 was intended to remove
all such usage, but these arch-specific files were overlooked, leading
to inconsistent declarations and definitions.

remove __syscall declaration where it is not needed (aarch64, arm,
microblaze, or1k) and add the hidden attribute where it is (mips).

depending on the compiler's interpretation of __asm__ register names
for register class objects, it may be possible for the return value in
r2 to be clobbered by the function call to __stat_fix. I have not
observed any such breakage in normal builds and suspect it only
happens with -O0 or other unusual build options, but since there's an
ambiguity as to the semantics of this feature, it's best to use an
explicit temporary to avoid the issue.

based on reporting and patch by Eugene.

due to what was essentially a copy and paste error, the changes made
in commit f61be1f8 caused syscalls
with 5 or 6 arguments (and syscalls with 2, 3, or 4 arguments when
compiled with clang compatibility) to negate the returned error code a
second time, breaking errno reporting.

the mips version of this structure on the kernel side wrongly has
32-bit type rather than 64-bit type. fortunately there is adjacent
padding to bring it up to 64 bits, and on little-endian, this allows
us to treat the adjacent kernel st_dev and st_pad0[0] as as single
64-bit dev_t. however, on big endian, such treatment results in the
upper and lower 32-bit parts of the dev_t value being swapped. for the
purpose of just comparing st_dev values this did not break anything,
but it precluded actually processing the device numbers as major/minor
values.

since the broken kernel behavior that needs to be worked around is
isolated to one arch, I put the workarounds in syscall_arch.h rather
than adding a stat fixup path in the common code. on little endian
mips, the added code optimizes out completely.

the changes necessary were incompatible with the way the __asm_syscall
macro was factored so I just removed it and flattened the individual
__syscallN functions. this arguably makes the code easier to read and
understand, anyway.

On 32 bit mips the kernel uses -1UL/2 to mark RLIM_INFINITY (and
this is the definition in the userspace api), but since it is in
the middle of the valid range of limits and limits are often
compared with relational operators, various kernel side logic is
broken if larger than -1UL/2 limits are used. So we truncate the
limits to -1UL/2 in get/setrlimit and prlimit.

Even if the kernel side logic consistently treated -1UL/2 as greater
than any other limit value, there wouldn't be any clean workaround
that allowed using large limits:
* using -1UL/2 as RLIM_INFINITY in userspace would mean different
infinity value for get/setrlimt and prlimit (where infinity is always
-1ULL) and userspace logic could break easily (just like the kernel
is broken now) and more special case code would be needed for mips.
* translating -1UL/2 kernel side value to -1ULL in userspace would
mean that -1UL/2 limit cannot be set (eg. -1UL/2+1 had to be passed
to the kernel instead).

the reordering of headers caused some risc archs to not see
the __syscall declaration anymore.
this caused build errors on mips with any compiler,
and on arm and microblaze with clang.

we now declare it locally just like the powerpc port does.

the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.

note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.

if same register is used for input/output, the compiler must be told.
otherwise is generates random junk code that clobbers the result. in
pure syscall-wrapper functions, nothing went wrong, but in more
complex functions where register allocation is non-trivial, things
broke badly.

by using the "ir" constraint (immediate or register) and the carefully
constructed instruction addu $2,$0,%2 which can take either an
immediate or a register for %2, the new inline asm admits maximal
optimization with no register spillage to the stack when the compiler
successfully performs constant propagration, but still works by
allocating a register when the syscall number cannot be recognized as
a constant. in the case of syscalls with 0-3 arguments it barely
matters, but for 4-argument syscalls, using an immediate for the
syscall number avoids creating a stack frame for the syscall wrapper
function.

all past and current kernel versions have done so, but there seems to
be no reason it's necessary and the sentiment from everyone I've asked
has been that we should not rely on it. instead, use r7 (an argument
register) which will necessarily be preserved upon syscall restart.
however this only works for 0-3 argument syscalls, and we have to
resort to the function call for 4-argument syscalls.

this drastically reduces the size of some functions which are purely
syscall wrappers.

disabled for clang due to known bugs satisfying register constraints.

now public syscall.h only exposes __NR_* and SYS_* constants and the
variadic syscall function. no macros or inline functions, no
__syscall_ret or other internal details, no 16-/32-bit legacy syscall
renaming, etc. this logic has all been moved to src/internal/syscall.h
with the arch-specific parts in arch/$(ARCH)/syscall_arch.h, and the
amount of arch-specific stuff has been reduced to a minimum.

changes still need to be reviewed/double-checked. minimal testing on
i386 and mips has already been performed.