提交 9bb4be5e 编写于 作者: N Neil Chen

fix typos for net

Signed-off-by: NNeil Chen <jingsi.chen@petalmail.com>
上级 4acf1e9f
......@@ -243,7 +243,7 @@ struct ifconfig_option {
unsigned char ethaddr[6];
u16_t mtu;
/* when using telnet, print to the telnet socket will result in system */
/* deadlock. So we cahe the prinf data to a buf, and when the tcpip */
/* deadlock. So we cache the print data to a buf, and when the tcpip */
/* callback returns, then print the data out to the telnet socket */
sys_sem_t cb_completed;
char cb_print_buf[PRINT_BUF_LEN];
......@@ -1158,9 +1158,9 @@ struct arp_option {
unsigned int ipaddr;
/* hw addr */
unsigned char ethaddr[6];
/* when using telnet, printf to the telnet socket will result in system */
/* deadlock.so don't do it.cahe the data to prinf to a buf, and when */
/* callback returns, then printf the data out to the telnet socket */
/* when using telnet, print to the telnet socket will result in system */
/* deadlock.so don't do it. cache the data to print to a buf, and when */
/* callback returns, then print the data out to the telnet socket */
sys_sem_t cb_completed;
char cb_print_buf[PRINT_BUF_LEN];
int print_buf_len;
......@@ -1326,7 +1326,7 @@ out:
} else if (ret == ERR_RTE) {
(void)snprintf_s(arp_cmd->cb_print_buf, PRINT_BUF_LEN, (PRINT_BUF_LEN - 1), "Network is unreachable\n");
} else {
(void)snprintf_s(arp_cmd->cb_print_buf, PRINT_BUF_LEN, (PRINT_BUF_LEN - 1), "Successed\n");
(void)snprintf_s(arp_cmd->cb_print_buf, PRINT_BUF_LEN, (PRINT_BUF_LEN - 1), "Succeeded\n");
}
}
#endif
......@@ -2234,13 +2234,13 @@ u32_t osShellPing6(int argc, const char **argv)
}
if ((u32_t)ret < sizeof(struct icmp6_echo_hdr *)) {
/* Drop the packet if its too short [Doesnot contain even the header !!] */
/* Drop the packet if its too short [Doesn't contain even the header !!] */
PRINTK("ping6 : received ICMP echo response too short\n");
goto REDUCE_SELECT_TIME;
}
/* Acceping the ICMPv6 payload. */
/* Here, pbuf_resp->payload wont contain IPv6 Header since its an AF_INET6 RAW Socket */
/* Here, pbuf_resp->payload won't contain IPv6 Header since its an AF_INET6 RAW Socket */
iecho_resp = (struct icmp6_echo_hdr *)pbuf_resp->payload;
if (iecho_resp->id == icmpv6_id) {
......@@ -2283,7 +2283,7 @@ u32_t osShellPing6(int argc, const char **argv)
/* Checking if its a delayed packet */
if ((iecho_resp->seqno != icmpv6_seq) && (nsent < ping6_params.pingcount)) {
/* Incase of delayed packet wait on socket for other response before sending a new PING */
/* In case of delayed packet wait on socket for other response before sending a new PING */
/* We have to reduce the timeout value now when selecting on socket */
goto REDUCE_SELECT_TIME;
}
......@@ -2313,7 +2313,7 @@ REDUCE_SELECT_TIME:
nsent, nrecieve, (float)(((float)(nsent - nrecieve)) * ((float)(100)) / ((float)(nsent))),
((last.tv_sec - first.tv_sec) * 1000 + (last.tv_nsec - first.tv_nsec) / 1000000));
if (nrecieve) {
/* Display rtt stats only if atleast one packet is received */
/* Display rtt stats only if at least one packet is received */
PRINTK("rtt min/avg/max = %u/%.2f/%u ms\n", ping6_stats.min_rtt, ping6_stats.avg_rtt, ping6_stats.max_rtt);
}
......@@ -2778,7 +2778,7 @@ int netstat_get_udp_sendQLen6(struct udp_pcb *udppcb, struct pbuf *udpbuf)
goto FUNC_OUT;
}
/* check if there is enough space for atleast udp header available */
/* check if there is enough space for at least udp header available */
if (udpbuf->tot_len < UDP_HLEN) {
goto FUNC_OUT;
}
......
......@@ -601,7 +601,7 @@ LWIP_STATIC void handle_request(struct netif *netif, struct dhcps *dhcps, struct
dhcp_common_option_byte(srvr_msg, DHCP_NAK, &options_len);
/* Just set this here, so that the NAK message is brcasted.
The correct flags has already been added in the respose message during base message creation */
The correct flags has already been added in the response message during base message creation */
client_msg->flags |= htons(DHCP_BROADCAST_FLAG);
client_msg->ciaddr.addr = 0; /* This is done so that NAK Gets brcasted */
#ifdef LWIP_DEV_DEBUG
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册