Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 04 5月, 2018 9 次提交
  3. 03 5月, 2018 12 次提交
    • E
      tcp: restore autocorking · 114f39fe
      由 Eric Dumazet 提交于 
      When adding rb-tree for TCP retransmit queue, we inadvertently broke
TCP autocorking.

tcp_should_autocork() should really check if the rtx queue is not empty.

Tested:

Before the fix :
$ nstat -n;./netperf -H 10.246.7.152 -Cc -- -m 500;nstat | grep AutoCork
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

540000 262144    500    10.00      2682.85   2.47     1.59     3.618   2.329
TcpExtTCPAutoCorking            33                 0.0

// Same test, but forcing TCP_NODELAY
$ nstat -n;./netperf -H 10.246.7.152 -Cc -- -D -m 500;nstat | grep AutoCork
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET : nodelay
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

540000 262144    500    10.00      1408.75   2.44     2.96     6.802   8.259
TcpExtTCPAutoCorking            1                  0.0

After the fix :
$ nstat -n;./netperf -H 10.246.7.152 -Cc -- -m 500;nstat | grep AutoCork
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

540000 262144    500    10.00      5472.46   2.45     1.43     1.761   1.027
TcpExtTCPAutoCorking            361293             0.0

// With TCP_NODELAY option
$ nstat -n;./netperf -H 10.246.7.152 -Cc -- -D -m 500;nstat | grep AutoCork
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.152 () port 0 AF_INET : nodelay
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

540000 262144    500    10.00      5454.96   2.46     1.63     1.775   1.174
TcpExtTCPAutoCorking            315448             0.0

Fixes: 75c119af ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NMichael Wenig <mwenig@vmware.com>
Tested-by: NMichael Wenig <mwenig@vmware.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NMichael Wenig <mwenig@vmware.com>
Tested-by: NMichael Wenig <mwenig@vmware.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      114f39fe
    • S
      ip6_gre: correct the function name in ip6gre_tnl_addr_conflict() comment · 7ccbdff1
      由 Sun Lianwen 提交于 
      The function name is wrong in ip6gre_tnl_addr_conflict() comment, which
use ip6_tnl_addr_conflict instead of ip6gre_tnl_addr_conflict.
Signed-off-by: NSun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7ccbdff1
    • E
      rds: do not leak kernel memory to user land · eb80ca47
      由 Eric Dumazet 提交于 
      syzbot/KMSAN reported an uninit-value in put_cmsg(), originating
from rds_cmsg_recv().

Simply clear the structure, since we have holes there, or since
rx_traces might be smaller than RDS_MSG_RX_DGRAM_TRACE_MAX.

BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in put_cmsg+0x600/0x870 net/core/scm.c:242
CPU: 0 PID: 4459 Comm: syz-executor582 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 kmsan_internal_check_memory+0x135/0x1e0 mm/kmsan/kmsan.c:1157
 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
 copy_to_user include/linux/uaccess.h:184 [inline]
 put_cmsg+0x600/0x870 net/core/scm.c:242
 rds_cmsg_recv net/rds/recv.c:570 [inline]
 rds_recvmsg+0x2db5/0x3170 net/rds/recv.c:657
 sock_recvmsg_nosec net/socket.c:803 [inline]
 sock_recvmsg+0x1d0/0x230 net/socket.c:810
 ___sys_recvmsg+0x3fb/0x810 net/socket.c:2205
 __sys_recvmsg net/socket.c:2250 [inline]
 SYSC_recvmsg+0x298/0x3c0 net/socket.c:2262
 SyS_recvmsg+0x54/0x80 net/socket.c:2257
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 3289025a ("RDS: add receive message trace used by application")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: linux-rdma <linux-rdma@vger.kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eb80ca47
    • C
      net sched: Implemented get_fill_size routine for act_csum. · 29e6eee1
      由 Craig Dillabaugh 提交于 
      Signed-off-by: NCraig Dillabaugh <cdillaba@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      29e6eee1
    • J
      ipv4: fix fnhe usage by non-cached routes · 94720e3a
      由 Julian Anastasov 提交于 
      Allow some non-cached routes to use non-expired fnhe:

1. ip_del_fnhe: moved above and now called by find_exception.
The 4.5+ commit deed49df expires fnhe only when caching
routes. Change that to:

1.1. use fnhe for non-cached local output routes, with the help
from (2)

1.2. allow __mkroute_input to detect expired fnhe (outdated
fnhe_gw, for example) when do_cache is false, eg. when itag!=0
for unicast destinations.

2. __mkroute_output: keep fi to allow local routes with orig_oif != 0
to use fnhe info even when the new route will not be cached into fnhe.
After commit 839da4d9 ("net: ipv4: set orig_oif based on fib
result for local traffic") it means all local routes will be affected
because they are not cached. This change is used to solve a PMTU
problem with IPVS (and probably Netfilter DNAT) setups that redirect
local clients from target local IP (local route to Virtual IP)
to new remote IP target, eg. IPVS TUN real server. Loopback has
64K MTU and we need to create fnhe on the local route that will
keep the reduced PMTU for the Virtual IP. Without this change
fnhe_pmtu is updated from ICMP but never exposed to non-cached
local routes. This includes routes with flowi4_oif!=0 for 4.6+ and
with flowi4_oif=any for 4.14+).

3. update_or_create_fnhe: make sure fnhe_expires is not 0 for
new entries

Fixes: 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic")
Fixes: d6d5e999 ("route: do not cache fib route info on local routes with oif")
Fixes: deed49df ("route: check and remove route cache when we get route")
Cc: David Ahern <dsahern@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      94720e3a
    • E
      net_sched: fq: take care of throttled flows before reuse · 7df40c26
      由 Eric Dumazet 提交于 
      Normally, a socket can not be freed/reused unless all its TX packets
left qdisc and were TX-completed. However connect(AF_UNSPEC) allows
this to happen.

With commit fc59d5bd ("pkt_sched: fq: clear time_next_packet for
reused flows") we cleared f->time_next_packet but took no special
action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches,
blindly clearing it might break rb-tree integrity. We need to make
sure the flow is no longer in the rb-tree to avoid this problem.

Fixes: fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7df40c26
    • I
      ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6" · 30ca22e4
      由 Ido Schimmel 提交于 
      This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for
IPv6").

Eric reported a division by zero in rt6_multipath_rebalance() which is
caused by above commit that considers identical local routes to be
siblings. The division by zero happens because a nexthop weight is not
set for local routes.

Revert the commit as it does not fix a bug and has side effects.

To reproduce:

# ip -6 address add 2001:db8::1/64 dev dummy0
# ip -6 address add 2001:db8::1/64 dev dummy1

Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      30ca22e4
    • U
      net/smc: determine vlan_id of stacked net_device · cb9d43f6
      由 Ursula Braun 提交于 
      An SMC link group is bound to a specific vlan_id. Its link uses
the RoCE-GIDs established for the specific vlan_id. This patch makes
sure the appropriate vlan_id is determined for stacked scenarios like
for instance a master bonding device with vlan devices enslaved.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb9d43f6
    • U
      net/smc: handle ioctls SIOCINQ, SIOCOUTQ, and SIOCOUTQNSD · 9b67e26f
      由 Ursula Braun 提交于 
      SIOCINQ returns the amount of unread data in the RMB.
SIOCOUTQ returns the amount of unsent or unacked sent data in the send
buffer.
SIOCOUTQNSD returns the amount of data prepared for sending, but
not yet sent.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9b67e26f
    • K
      net/smc: ipv6 support for smc_diag.c · ed75986f
      由 Karsten Graul 提交于 
      Update smc_diag.c to support ipv6 addresses on the diagnosis interface.
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ed75986f
    • K
      net/smc: periodic testlink support · 877ae5be
      由 Karsten Graul 提交于 
      Add periodic LLC testlink support to ensure the link is still active.
The interval time is initialized using the value of
sysctl_tcp_keepalive_time.
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      877ae5be
    • U
      net/smc: restrict non-blocking connect finish · 784813ae
      由 Ursula Braun 提交于 
      The smc_poll code tries to finish connect() if the socket is in
state SMC_INIT and polling of the internal CLC-socket returns with
EPOLLOUT. This makes sense for a select/poll call following a connect
call, but not without preceding connect().
With this patch smc_poll starts connect logic only, if the CLC-socket
is no longer in its initial state TCP_CLOSE.

In addition, a poll error on the internal CLC-socket is always
propagated to the SMC socket.

With this patch the code path mentioned by syzbot
https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396
is no longer possible.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      784813ae
  5. 02 5月, 2018 16 次提交
    • X
      sctp: fix the issue that the cookie-ack with auth can't get processed · ce402f04
      由 Xin Long 提交于 
      When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
processes auth chunk first, then continues to the next chunk in
this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
Otherwise, it will go to the next packet or discard this chunk.

However, it missed the fact that cookie-ack chunk's size is equal
to chunk_hdr size, which couldn't match that check, and thus this
chunk would not get processed.

This patch fixes it by changing the check to chunk_end + chunk_hdr
size <= skb_tail_pointer().

Fixes: 26b87c78 ("net: sctp: fix remote memory pressure from excessive queueing")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ce402f04
    • X
      sctp: use the old asoc when making the cookie-ack chunk in dupcook_d · 46e16d4b
      由 Xin Long 提交于 
      When processing a duplicate cookie-echo chunk, for case 'D', sctp will
not process the param from this chunk. It means old asoc has nothing
to be updated, and the new temp asoc doesn't have the complete info.

So there's no reason to use the new asoc when creating the cookie-ack
chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
can not be set with auth, and it will definitely be dropped by peer.

This issue is there since very beginning, and we fix it by using the
old asoc instead.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      46e16d4b
    • X
      sctp: init active key for the new asoc in dupcook_a and dupcook_b · 4842a08f
      由 Xin Long 提交于 
      When processing a duplicate cookie-echo chunk, for case 'A' and 'B',
after sctp_process_init for the new asoc, if auth is enabled for the
cookie-ack chunk, the active key should also be initialized.

Otherwise, the cookie-ack chunk made later can not be set with auth
shkey properly, and a crash can even be caused by this, as after
Commit 1b1e0bc9 ("sctp: add refcnt support for sh_key"), sctp
needs to hold the shkey when making control chunks.

Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key")
Reported-by: NJianwen Ji <jiji@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4842a08f
    • N
      tcp_bbr: fix to zero idle_restart only upon S/ACKed data · e6e6a278
      由 Neal Cardwell 提交于 
      Previously the bbr->idle_restart tracking was zeroing out the
bbr->idle_restart bit upon ACKs that did not SACK or ACK anything,
e.g. receiving incoming data or receiver window updates. In such
situations BBR would forget that this was a restart-from-idle
situation, and if the min_rtt had expired it would unnecessarily enter
PROBE_RTT (even though we were actually restarting from idle but had
merely forgotten that fact).

The fix is simple: we need to remember we are restarting from idle
until we receive a S/ACK for some data (a S/ACK for the first flight
of data we send as we are restarting).

This commit is a stable candidate for kernels back as far as 4.9.

Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NPriyaranjan Jha <priyarjha@google.com>
Signed-off-by: NYousuk Seung <ysseung@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e6e6a278
    • S
      udp: Complement partial checksum for GSO packet · 6c035ba7
      由 Sean Tranchetti 提交于 
      Using the udp_v4_check() function to calculate the pseudo header
for the newly segmented UDP packets results in assigning the complement
of the value to the UDP header checksum field.

Always undo the complement the partial checksum value in order to
match the case where GSO is not used on the UDP transmit path.

Fixes: ee80d1eb ("udp: add udp gso")
Signed-off-by: NSean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6c035ba7
    • D
      net/tls: Don't recursively call push_record during tls_write_space callbacks · c212d2c7
      由 Dave Watson 提交于 
      It is reported that in some cases, write_space may be called in
do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again:

[  660.468802]  ? do_tcp_sendpages+0x8d/0x580
[  660.468826]  ? tls_push_sg+0x74/0x130 [tls]
[  660.468852]  ? tls_push_record+0x24a/0x390 [tls]
[  660.468880]  ? tls_write_space+0x6a/0x80 [tls]
...

tls_push_sg already does a loop over all sending sg's, so ignore
any tls_write_space notifications until we are done sending.
We then have to call the previous write_space to wake up
poll() waiters after we are done with the send loop.
Reported-by: NAndre Tomt <andre@tomt.net>
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c212d2c7
    • S
      tcp: send in-queue bytes in cmsg upon read · b75eba76
      由 Soheil Hassas Yeganeh 提交于 
      Applications with many concurrent connections, high variance
in receive queue length and tight memory bounds cannot
allocate worst-case buffer size to drain sockets. Knowing
the size of receive queue length, applications can optimize
how they allocate buffers to read from the socket.

The number of bytes pending on the socket is directly
available through ioctl(FIONREAD/SIOCINQ) and can be
approximated using getsockopt(MEMINFO) (rmem_alloc includes
skb overheads in addition to application data). But, both of
these options add an extra syscall per recvmsg. Moreover,
ioctl(FIONREAD/SIOCINQ) takes the socket lock.

Add the TCP_INQ socket option to TCP. When this socket
option is set, recvmsg() relays the number of bytes available
on the socket for reading to the application via the
TCP_CM_INQ control message.

Calculate the number of bytes after releasing the socket lock
to include the processed backlog, if any. To avoid an extra
branch in the hot path of recvmsg() for this new control
message, move all cmsg processing inside an existing branch for
processing receive timestamps. Since the socket lock is not held
when calculating the size of receive queue, TCP_INQ is a hint.
For example, it can overestimate the queue size by one byte,
if FIN is received.

With this method, applications can start reading from the socket
using a small buffer, and then use larger buffers based on the
remaining data when needed.

V3 change-log:
	As suggested by David Miller, added loads with barrier
	to check whether we have multiple threads calling recvmsg
	in parallel. When that happens we lock the socket to
	calculate inq.
V4 change-log:
	Removed inline from a static function.
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NNeal Cardwell <ncardwell@google.com>
Suggested-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b75eba76
    • F
      net: core: Inline netdev_features_size_check() · e283de3a
      由 Florian Fainelli 提交于 
      We do not require this inline function to be used in multiple different
locations, just inline it where it gets used in register_netdevice().
Suggested-by: NDavid Miller <davem@davemloft.net>
Suggested-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e283de3a
    • T
      ipv6: Allow non-gateway ECMP for IPv6 · edd7ceb7
      由 Thomas Winter 提交于 
      It is valid to have static routes where the nexthop
is an interface not an address such as tunnels.
For IPv4 it was possible to use ECMP on these routes
but not for IPv6.
Signed-off-by: NThomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      edd7ceb7
    • W
      udp: disable gso with no_check_tx · a8c744a8
      由 Willem de Bruijn 提交于 
      Syzbot managed to send a udp gso packet without checksum offload into
the gso stack by disabling tx checksum (UDP_NO_CHECK6_TX). This
triggered the skb_warn_bad_offload.

  RIP: 0010:skb_warn_bad_offload+0x2bc/0x600 net/core/dev.c:2658
   skb_gso_segment include/linux/netdevice.h:4038 [inline]
   validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3120
   __dev_queue_xmit+0xbf8/0x34c0 net/core/dev.c:3577
   dev_queue_xmit+0x17/0x20 net/core/dev.c:3618

UDP_NO_CHECK6_TX sets skb->ip_summed to CHECKSUM_NONE just after the
udp gso integrity checks in udp_(v6_)send_skb. Extend those checks to
catch and fail in this case.

After the integrity checks jump directly to the CHECKSUM_PARTIAL case
to avoid reading the no_check_tx flags again (a TOCTTOU race).

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a8c744a8
    • W
      ethtool: fix a potential missing-check bug · d656fe49
      由 Wenwen Wang 提交于 
      In ethtool_get_rxnfc(), the object "info" is firstly copied from
user-space. If the FLOW_RSS flag is set in the member field flow_type of
"info" (and cmd is ETHTOOL_GRXFH), info needs to be copied again from
user-space because FLOW_RSS is newer and has new definition, as mentioned
in the comment. However, given that the user data resides in user-space, a
malicious user can race to change the data after the first copy. By doing
so, the user can inject inconsistent data. For example, in the second
copy, the FLOW_RSS flag could be cleared in the field flow_type of "info".
In the following execution, "info" will be used in the function
ops->get_rxnfc(). Such inconsistent data can potentially lead to unexpected
information leakage since ops->get_rxnfc() will prepare various types of
data according to flow_type, and the prepared data will be eventually
copied to user-space. This inconsistent data may also cause undefined
behaviors based on how ops->get_rxnfc() is implemented.

This patch simply re-verifies the flow_type field of "info" after the
second copy. If the value is not as expected, an error code will be
returned.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d656fe49
    • P
      cls_flower: Support multiple masks per priority · 05cd271f
      由 Paul Blakey 提交于 
      Currently flower doesn't support inserting filters with different masks
on a single priority, even if the actual flows (key + mask) inserted
aren't overlapping, as with the use case of offloading openvswitch
datapath flows. Instead one must go up one level, and assign different
priorities for each mask, which will create a different flower
instances.

This patch opens flower to support more than one mask per priority,
and a single flower instance. It does so by adding another hash table
on top of the existing one which will store the different masks,
and the filters that share it.

The user is left with the responsibility of ensuring non overlapping
flows, otherwise precedence is not guaranteed.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      05cd271f
    • E
      tcp: fix TCP_REPAIR_QUEUE bound checking · bf2acc94
      由 Eric Dumazet 提交于 
      syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out()
with following C-repro :

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0
bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
	1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242
setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0
writev(3, [{"\270", 1}], 1)             = 1
setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0
writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144

The 3rd system call looks odd :
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0

This patch makes sure bound checking is using an unsigned compare.

Fixes: ee995283 ("tcp: Initial repair mode")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bf2acc94
    • E
      ipv6: fix uninit-value in ip6_multipath_l3_keys() · cea67a2d
      由 Eric Dumazet 提交于 
      syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(),
root caused to a bad assumption of ICMP header being already
pulled in skb->head

ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug.

BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
 rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884
 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
 netif_receive_skb+0x230/0x240 net/core/dev.c:4725
 tun_rx_batched drivers/net/tun.c:1555 [inline]
 tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 23aebdac ("ipv6: Compute multipath hash for ICMP errors from offending packet")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: NJakub Sitnicki <jkbs@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cea67a2d
    • M
      sctp: add sctp_make_op_error_limited and reuse inner functions · 8914f4ba
      由 Marcelo Ricardo Leitner 提交于 
      The idea is quite similar to the old functions, but note that the _fixed
function wasn't "fixed" as in that it would generate a packet with a fixed
size, but rather limited/bounded to PMTU.

Also, now with sctp_mtu_payload(), we have a more accurate limit.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8914f4ba
    • M
      sctp: allow sctp_init_cause to return errors · 6d3e8aa8
      由 Marcelo Ricardo Leitner 提交于 
      And do so if the skb doesn't have enough space for the payload.
This is a preparation for the next patch.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6d3e8aa8
  7. 01 5月, 2018 3 次提交
    • I
      net/tls: Add generic NIC offload infrastructure · e8f69799
      由 Ilya Lesokhin 提交于 
      This patch adds a generic infrastructure to offload TLS crypto to a
network device. It enables the kernel TLS socket to skip encryption
and authentication operations on the transmit side of the data path.
Leaving those computationally expensive operations to the NIC.

The NIC offload infrastructure builds TLS records and pushes them to
the TCP layer just like the SW KTLS implementation and using the same
API.
TCP segmentation is mostly unaffected. Currently the only exception is
that we prevent mixed SKBs where only part of the payload requires
offload. In the future we are likely to add a similar restriction
following a change cipher spec record.

The notable differences between SW KTLS and NIC offloaded TLS
implementations are as follows:
1. The offloaded implementation builds "plaintext TLS record", those
records contain plaintext instead of ciphertext and place holder bytes
instead of authentication tags.
2. The offloaded implementation maintains a mapping from TCP sequence
number to TLS records. Thus given a TCP SKB sent from a NIC offloaded
TLS socket, we can use the tls NIC offload infrastructure to obtain
enough context to encrypt the payload of the SKB.
A TLS record is released when the last byte of the record is ack'ed,
this is done through the new icsk_clean_acked callback.

The infrastructure should be extendable to support various NIC offload
implementations.  However it is currently written with the
implementation below in mind:
The NIC assumes that packets from each offloaded stream are sent as
plaintext and in-order. It keeps track of the TLS records in the TCP
stream. When a packet marked for offload is transmitted, the NIC
encrypts the payload in-place and puts authentication tags in the
relevant place holders.

The responsibility for handling out-of-order packets (i.e. TCP
retransmission, qdisc drops) falls on the netdev driver.

The netdev driver keeps track of the expected TCP SN from the NIC's
perspective.  If the next packet to transmit matches the expected TCP
SN, the driver advances the expected TCP SN, and transmits the packet
with TLS offload indication.

If the next packet to transmit does not match the expected TCP SN. The
driver calls the TLS layer to obtain the TLS record that includes the
TCP of the packet for transmission. Using this TLS record, the driver
posts a work entry on the transmit queue to reconstruct the NIC TLS
state required for the offload of the out-of-order packet. It updates
the expected TCP SN accordingly and transmits the now in-order packet.
The same queue is used for packet transmission and TLS context
reconstruction to avoid the need for flushing the transmit queue before
issuing the context reconstruction request.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e8f69799
    • B
      net/tls: Split conf to rx + tx · f66de3ee
      由 Boris Pismenny 提交于 
      In TLS inline crypto, we can have one direction in software
and another in hardware. Thus, we split the TLS configuration to separate
structures for receive and transmit.
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f66de3ee
    • I
      net: Add TLS TX offload features · 2342a851
      由 Ilya Lesokhin 提交于 
      This patch adds a netdev feature to configure TLS TX offloads.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2342a851