Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 接近 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
切换分支/标签
  1. 22 6月, 2009 2 次提交
    • T
      x86: rename remap percpu first chunk allocator to lpage · 97c9bf06
      由 Tejun Heo 提交于 
      The "remap" allocator remaps large pages to build the first chunk;
however, the name isn't very good because 4k allocator remaps too and
the whole point of the remap allocator is using large page mapping.
The allocator will be generalized and exported outside of x86, rename
it to lpage before that happens.

percpu_alloc kernel parameter is updated to accept both "remap" and
"lpage" for lpage allocator.

[ Impact: code cleanup, kernel parameter argument updated ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
      97c9bf06
    • T
      x86: fix duplicate free in setup_pcpu_remap() failure path · c5806df9
      由 Tejun Heo 提交于 
      In the failure path, setup_pcpu_remap() tries to free the area which
has already been freed to make holes in the large page.  Fix it.

[ Impact: fix duplicate free in failure path ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
      c5806df9
  3. 19 6月, 2009 3 次提交
    • P
      perf_counter: Make callchain samples extensible · f9188e02
      由 Peter Zijlstra 提交于 
      Before exposing upstream tools to a callchain-samples ABI, tidy it
up to make it more extensible in the future:

Use markers in the IP chain to denote context, use (u64)-1..-4095 range
for these context markers because we use them for ERR_PTR(), so these
addresses are unlikely to be mapped.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f9188e02
    • S
      function-graph: add stack frame test · 71e308a2
      由 Steven Rostedt 提交于 
      In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.

An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.

This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.

There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.

This test detected the problem and pointed out where the issue was.

This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.

Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      71e308a2
    • P
      gcov: enable GCOV_PROFILE_ALL for x86_64 · 7bf99fb6
      由 Peter Oberparleiter 提交于 
      Enable gcov profiling of the entire kernel on x86_64. Required changes
include disabling profiling for:

* arch/kernel/acpi/realmode and arch/kernel/boot/compressed:
  not linked to main kernel
* arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet:
  profiling causes segfaults during boot (incompatible context)
Signed-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7bf99fb6
  5. 18 6月, 2009 10 次提交
    • H
      x86, mce: fix error path in mce_create_device() · b1f49f95
      由 Hidetoshi Seto 提交于 
      Don't skip removing mce_attrs in route from error2.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      b1f49f95
    • Y
      x86: use zalloc_cpumask_var for mce_dev_initialized · e92fae06
      由 Yinghai Lu 提交于 
      We need a cleared cpu_mask to record if mce is initialized, especially
when MAXSMP is used.

used zalloc_... instead
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      e92fae06
    • Y
      x86: fix duplicated sysfs attribute · 74b602c7
      由 Yinghai Lu 提交于 
      The sysfs attribute cmci_disabled was accidentall turned into a
duplicate of ignore_ce, breaking all other attributes.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      74b602c7
    • A
      x86: de-assembler-ize asm/desc.h · bc3f5d3d
      由 Alexander van Heukelum 提交于 
      asm/desc.h is included in three assembly files, but the only macro
it defines, GET_DESC_BASE, is never used. This patch removes the
includes, removes the macro GET_DESC_BASE and the ASSEMBLY guard
from asm/desc.h.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      bc3f5d3d
    • A
      i386: fix/simplify espfix stack switching, move it into assembly · dc4c2a0a
      由 Alexander van Heukelum 提交于 
      The espfix code triggers if we have a protected mode userspace
application with a 16-bit stack. On returning to userspace, with iret,
the CPU doesn't restore the high word of the stack pointer. This is an
"official" bug, and the work-around used in the kernel is to temporarily
switch to a 32-bit stack segment/pointer pair where the high word of the
pointer is equal to the high word of the userspace stackpointer.

The current implementation uses THREAD_SIZE to determine the cut-off,
but there is no good reason not to use the more natural 64kb... However,
implementing this by simply substituting THREAD_SIZE with 65536 in
patch_espfix_desc crashed the test application. patch_espfix_desc tries
to do what is described above, but gets it subtly wrong if the userspace
stack pointer is just below a multiple of THREAD_SIZE: an overflow
occurs to bit 13... With a bit of luck, when the kernelspace
stackpointer is just below a 64kb-boundary, the overflow then ripples
trough to bit 16 and userspace will see its stack pointer changed by
65536.

This patch moves all espfix code into entry_32.S. Selecting a 16-bit
cut-off simplifies the code. The game with changing the limit dynamically
is removed too. It complicates matters and I see no value in it. Changing
only the top 16-bit word of ESP is one instruction and it also implies
that only two bytes of the ESPFIX GDT entry need to be changed and this
can be implemented in just a handful simple to understand instructions.
As a side effect, the operation to compute the original ESP from the
ESPFIX ESP and the GDT entry simplifies a bit too, and the remaining
three instructions have been expanded inline in entry_32.S.

impact: can now reliably run userspace with ESP=xxxxfffc on 16-bit
stack segment
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      dc4c2a0a
    • A
      i386: fix return to 16-bit stack from NMI handler · 2e04bc76
      由 Alexander van Heukelum 提交于 
      Returning to a task with a 16-bit stack requires special care: the iret
instruction does not restore the high word of esp in that case. The
espfix code fixes this, but currently is not invoked on NMIs. This means
that a running task gets the upper word of esp clobbered due intervening
NMIs. To reproduce, compile and run the following program with the nmi
watchdog enabled (nmi_watchdog=2 on the command line). Using gdb you can
see that the high bits of esp contain garbage, while the low bits are
still correct.

This patch puts the espfix code back into the NMI code path.

The patch is slightly complicated due to the irqtrace infrastructure not
being NMI-safe. The NMI return path cannot call TRACE_IRQS_IRET.
Otherwise, the tail of the normal iret-code is correct for the nmi code
path too. To be able to share this code-path, the TRACE_IRQS_IRET was
move up a bit. The espfix code exists after the TRACE_IRQS_IRET, but
this code explicitly disables interrupts. This short interrupts-off
section is now not traced anymore. The return-to-kernel path now always
includes the preliminary test to decide if the espfix code should be
called. This is never the case, but doing it this way keeps the patch as
simple as possible and the few extra instructions should not affect
timing in any significant way.

 #define _GNU_SOURCE
 #include <stdio.h>
 #include <sys/types.h>
 #include <sys/mman.h>
 #include <unistd.h>
 #include <sys/syscall.h>
 #include <asm/ldt.h>

int modify_ldt(int func, void *ptr, unsigned long bytecount)
{
        return syscall(SYS_modify_ldt, func, ptr, bytecount);
}

/* this is assumed to be usable */
 #define SEGBASEADDR 0x10000
 #define SEGLIMIT 0x20000

/* 16-bit segment */
struct user_desc desc = {
        .entry_number = 0,
        .base_addr = SEGBASEADDR,
        .limit = SEGLIMIT,
        .seg_32bit = 0,
        .contents = 0, /* ??? */
        .read_exec_only = 0,
        .limit_in_pages = 0,
        .seg_not_present = 0,
        .useable = 1
};

int main(void)
{
        setvbuf(stdout, NULL, _IONBF, 0);

        /* map a 64 kb segment */
        char *pointer = mmap((void *)SEGBASEADDR, SEGLIMIT+1,
                        PROT_EXEC|PROT_READ|PROT_WRITE,
                        MAP_SHARED|MAP_ANONYMOUS, -1, 0);
        if (pointer == NULL) {
                printf("could not map space\n");
                return 0;
        }

        /* write ldt, new mode */
        int err = modify_ldt(0x11, &desc, sizeof(desc));
        if (err) {
                printf("error modifying ldt: %i\n", err);
                return 0;
        }

        for (int i=0; i<1000; i++) {
        asm volatile (
                "pusha\n\t"
                "mov %ss, %eax\n\t" /* preserve ss:esp */
                "mov %esp, %ebp\n\t"
                "push $7\n\t" /* index 0, ldt, user mode */
                "push $65536-4096\n\t" /* esp */
                "lss (%esp), %esp\n\t" /* switch to new stack */
                "push %eax\n\t" /* save old ss:esp on new stack */
                "push %ebp\n\t"
                "add $17*65536, %esp\n\t" /* set high bits */
                "mov %esp, %edx\n\t"

                "mov $10000000, %ecx\n\t" /* wait... */
                "1: loop 1b\n\t" /* ... a bit */

                "cmp %esp, %edx\n\t"
                "je 1f\n\t"
                "ud2\n\t" /* esp changed inexplicably! */
                "1:\n\t"
                "sub $17*65536, %esp\n\t" /* restore high bits */
                "lss (%esp), %esp\n\t" /* restore old ss:esp */
                "popa\n\t");

                printf("\rx%ix", i);
        }

        return 0;
}
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      2e04bc76
    • C
      x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present · 3f4c3955
      由 Cyrill Gorcunov 提交于 
      Vegard Nossum reported:

[  503.576724] ACPI: Preparing to enter system sleep state S5
[  503.710857] Disabling non-boot CPUs ...
[  503.716853] Power down.
[  503.717770] ------------[ cut here ]------------
[  503.717770] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_du)
[  503.717770] Hardware name: OptiPlex GX100
[  503.717770] Modules linked in:
[  503.717770] Pid: 2136, comm: halt Not tainted 2.6.30 #443
[  503.717770] Call Trace:
[  503.717770]  [<c154d327>] ? printk+0x18/0x1a
[  503.717770]  [<c1017358>] ? native_apic_write_dummy+0x38/0x50
[  503.717770]  [<c10360fc>] warn_slowpath_common+0x6c/0xc0
[  503.717770]  [<c1017358>] ? native_apic_write_dummy+0x38/0x50
[  503.717770]  [<c1036165>] warn_slowpath_null+0x15/0x20
[  503.717770]  [<c1017358>] native_apic_write_dummy+0x38/0x50
[  503.717770]  [<c1017173>] disconnect_bsp_APIC+0x63/0x100
[  503.717770]  [<c1019e48>] disable_IO_APIC+0xb8/0xc0
[  503.717770]  [<c1214231>] ? acpi_power_off+0x0/0x29
[  503.717770]  [<c1015e55>] native_machine_shutdown+0x65/0x80
[  503.717770]  [<c1015c36>] native_machine_power_off+0x26/0x30
[  503.717770]  [<c1015c49>] machine_power_off+0x9/0x10
[  503.717770]  [<c1046596>] kernel_power_off+0x36/0x40
[  503.717770]  [<c104680d>] sys_reboot+0xfd/0x1f0
[  503.717770]  [<c109daa0>] ? perf_swcounter_event+0xb0/0x130
[  503.717770]  [<c109db7d>] ? perf_counter_task_sched_out+0x5d/0x120
[  503.717770]  [<c102dfc6>] ? finish_task_switch+0x56/0xd0
[  503.717770]  [<c154da1e>] ? schedule+0x49e/0xb40
[  503.717770]  [<c10444b0>] ? sys_kill+0x70/0x160
[  503.717770]  [<c119d9db>] ? selinux_file_ioctl+0x3b/0x50
[  503.717770]  [<c10dd443>] ? sys_ioctl+0x63/0x70
[  503.717770]  [<c1003024>] sysenter_do_call+0x12/0x22
[  503.717770] ---[ end trace 8157b5d0ed378f15 ]---

|
| That's including this commit:
|
| commit 103428e5
|Author: Cyrill Gorcunov <gorcunov@openvz.org>
|Date:   Sun Jun 7 16:48:40 2009 +0400
|
|    x86, apic: Fix dummy apic read operation together with broken MP handling
|

If we have apic disabled we don't even switch to APIC mode and do not
calling for connect_bsp_APIC. Though on SMP compiled kernel the
native_machine_shutdown does try to write the apic register anyway.

Fix it with explicit check if we really should touch apic registers.
Reported-by: NVegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090617181322.GG10822@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3f4c3955
    • P
      perf_counter: x86: Set the period in the intel overflow handler · 60f916de
      由 Peter Zijlstra 提交于 
      Commit 9e350de3 ("perf_counter: Accurate period data")
missed a spot, which caused all Intel-PMU samples to have a
period of 0.

This broke auto-freq sampling.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      60f916de
    • H
      x86: Remove duplicated #include's · 8653f88f
      由 Huang Weiyi 提交于 
      Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
LKML-Reference: <1244895686-2348-1-git-send-email-weiyi.huang@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8653f88f
    • P
      x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround · fe955e5c
      由 Prarit Bhargava 提交于 
      Expand Intel NMI perfctr1 workaround to include a Core2 processor stepping
(cpuid family-6, model-f, stepping-4).  Resolves a situation where the NMI
would not enable on these processors.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: prarit@redhat.com
Cc: suresh.b.siddha@intel.com
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fe955e5c
  7. 17 6月, 2009 25 次提交