Replace uintX_t declarations with uX declarations.
Replace intX_t declarations with sX declarations.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes:

This is a re-submission.  On the original submission I was asked to
organize the code so that the MIPS ioc3 ethernet and serial parts could be
used with this driver.  Stanislaw Skowronek was kind enough to provide the
shim layer for this - thanks Stanislaw.  This patch includes the shim layer
and the Altix PCI ioc3 serial driver.  The MIPS merged ioc3 ethernet and
serial support is forthcoming.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch separates the sn_flush_device_list struct into kernel and
common (both kernel and PROM accessible) structures.  As it was, if the
size of a spinlock_t changed (due to additional CONFIG options, etc.) the
sal call which populated the sn_flush_device_list structs would erroneously
write data (and cause memory corruption and/or a panic).

This patch does the following:

1.  Removes sn_flush_device_list and adds sn_flush_device_common and
sn_flush_device_kernel.

2.  Adds a new SAL call to populate a sn_flush_device_common struct per
device, not per widget as previously done.

3.  Correctly initializes each device's sn_flush_device_kernel spinlock_t
struct (before it was only doing each widget's first device).
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix (shub2) pushes the BTE clean-up into SAL.
This patch correctly interfaces with the now implemented SAL call.
It also fixes a bug when delaying clean-up to allow busy BTEs to
complete (or error out).
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Cleanup a few items after moving xpc.h from arch/ia64/sn/kernel to
include/asm-ia64/sn.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Move xpc.h from arch/ia64/sn/kernel to include/asm-ia64/sn without change.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch fixes a problem in XPC disengage processing whereby it was not
seeing the request to disengage from a remote partition, so the disengage
wasn't happening. The disengagement is suppose to transpire during the time
a XPC channel is disconnecting, and should be completed before the channel
is declared to be disconnected.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix only patch to add fixup code that sets up
pci_controller->window. This code is a temporary
fix until ACPI support on Altix is added.

Also, corrects the usage of pci_dev->sysdata,
which had previously been used to reference
platform specific device info, to now point to
a pci_controller struct.
Signed-off-by: NJohn Keller <jpk@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add support for old versions of the SN PROMs. Eventually this
support will be deleted but it is useful right now to continue
supporting older PROMs.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix up copyright in tioce header files
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch addresses a few issues with the open/close protocol that
were revealed by the newly added disengage functionality combined
with more extensive testing.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Remove all references to the bist_lock in the SN code as it
is not used for anything.
Signed-off-by: NDean Roe <roe@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Increase the maximum system size of SGI SN systems. Note that
this is not the maximum SSI size. The maximum system size is
the number of nodes in the numalink domain.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch adds a #define for SN_SAL_IOIF_PCI_SAFE and makes that the
preferred method of implementing sn_pci_legacy_read() and
sn_pci_legacy_write().

This SAL call has been present in SGI proms since version 4.10.  If the
SN_SAL_IOIF_PCI_SAFE call fails, revert to the previous code for compatability
with older proms.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Some of the SN code & #defines related to compact nodes & IO discovery
have gotten stale over the years. This patch attempts to clean them up.
Some of the various SN MAX_xxx #defines were also unclear & misused.

The primary changes are:

	- use MAX_NUMNODES. This is the generic linux #define for the number
	  of nodes that are known to the generic kernel. Arrays & loops
	  for constructs that are 1:1 with linux-defined nodes should
	  use the linux #define - not an SN equivalent.

	- use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the
	  number of nodes in the SSI system. Compact nodes are a hack to
	  get around the IA64 architectural limit of 256 nodes. Large SGI
	  systems have more than 256 nodes. When we upgrade to ACPI3.0,
	  I _hope_ that all nodes will be real nodes that are known to
	  the generic kernel. That will allow us to delete the notion
	  of "compact nodes".

	- add MAX_NUMALINK_NODES for the total number of nodes that
	  are in the numalink domain - all partitions.

	- simplified (understandable) scan_for_ionodes()

	- small amount of cleanup related to cnodes
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Resend using accessors instead of volatile qualifiers per hch comments, and
easier to understand convenience macros per rja comments.

Patch to apply volatile semantics when accessing MMR's in various SN files.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

When XPC is being shutdown (i.e., rmmod, reboot) it doesn't ensure that
other partitions with whom it was connected have completely disengaged
from any attempt at cross-partition memory references. This can lead to
MCAs in any of these other partitions when the partition is reset.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

1) workaround a h/w reset issue
2) to improve the determination of FPGA-based h/w in
   the arch/ia64/sn/kernel/tiocx code.
Signed-off-by: NBruce Losure <blosure@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

- notifying the PROM of specific features that are supported by the OS.
  This is used to enable PROM feature if and only if the corresponding
  feature is implemented in the OS

- fetch feature sets that are supported by the current PROM. This allows
  the OS to selectively enable features when the PROM support is available.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Some shub2 changes were not in the tree when Greg cleaned up the sn2
region definitions in 1b66776d, so this
one didn't get fixed.
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix patch to abstract irq_affinity down to the pci provider level since
different SGI hardware implements this in different ways.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Clean up of SGI SN partitioning related code.
The SN_SAL_GET_SN_INFO SAL call returns the partition ID, making
the SN_SAL_SYSCTL_PARTITION_GET SAL call redundant.  Remove sn_partid
and use sn_partition_id.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add a new exported function for determining the nearest node
with CPUs for I/O nodes and fix a bug where the hwperf dynamic
misc device was being registered before misc_init(). 
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Bugfix to export PCI topology information in /proc/sgi_sn/sn_topology.
Signed-off-by: NMark Goodwin <markgw@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Clean up some duplicate region definitions in sn2 code.
Signed-off-by: NGreg Edwards <edwardsg@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Shub2 provides a much improved mechanism for issuing internode
TLB purges. Add code to support the newer mechanism. There is also 
some debug code (disabled) that is useful for testing.

Collect statistics on the number, type & duration of TLB purges.
This data will be useful for making future improvements in the algorithms.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add a few missing calls to "hint @pause".
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Update the SN address macros so that they work on both shub1 
and shub2. Most of the code to support shub2 was added last year
but this patch fixes a few bugs and adds macros to help generate
both processor-specific physical addresses & numalink physical
addresses. More cleanup & optimization will be done later.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix patch to add an SN pci provider for TIOCE, which is SGI's 
PCI Express implementation.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix patch to add TIO "huge-window" address support to sn_dma_flush().

Update copyright in affected files.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Altix patch to abstract the force_interrupt() mechanism away from the
pcibr provider.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Cosmetic altix patch to rename SGI_PCIBR_ERROR to something more generic and
remove a duplicate #define.
Signed-off-by: NMark Maule <maule@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch enables PCI Domain numbering on Altix.
Signed-off-by: NColin Ngam <cngam@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing
any kernel bootable on sn2 to also be booted in the simulator.

Boot tested on Altix and HP rx2600.
Signed-off-by: NGreg Edwards <edwardsg@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Jesse Barnes provided the original version of this patch months ago, but
other changes kept conflicting with it, so it got deferred.  Greg Edwards
dug it out of obscurity just over a week ago, and almost immediately
another conflicting patch appeared (Bob Picco's memory-less nodes).

I've resolved the conflicts and got it running again.  CONFIG_SGI_TIOCX
is set to "y" in defconfig, which causes a Tiger to not boot (oops in
tiocx_init).  But that can be resolved later ... get this in now before it
gets stale again.
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch fixes an issue with the PROM and a kernel running with
CONFIG_PREEMPT enabled.  When CONFIG_PREEMPT is enabled, the size of a
spinlock_t changes -- resulting in the PROM writing to an incorrect location.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This patch is a rewrite of the code to check the PROM version.  The current
code has some deficiences in the way PROM comparisons were made.  The minimum
value of PROM that will boot has also been changed to 4.04.
Signed-off-by: NPrarit Bhargava <prarit@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>