- 09 6月, 2009 3 次提交
-
-
由 Joerg Roedel 提交于
That prefix is already included in the DUMP_printk macro. So there is no need to repeat it in the format string. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This fixes a bug with a device that could not be assigned to a KVM guest because it is still assigned to a dma_ops protection domain. [chrisw: simply remove WARN_ON(), will always fire since dev->driver will be pci-sub] Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Handling this event causes device assignment in KVM to fail because the device gets re-attached as soon as the pci-stub registers as the driver for the device. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 03 6月, 2009 1 次提交
-
-
由 Jiri Slaby 提交于
In alloc_coherent there is an omitted unlock on the path where mapping fails. Add the unlock. [ Impact: fix lock imbalance in alloc_coherent ] Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 29 5月, 2009 16 次提交
-
-
由 Joerg Roedel 提交于
This will test the automatic aperture enlargement code. This is important because only very few devices will ever trigger this code path. So force it under CONFIG_IOMMU_STRESS. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This forces testing of on-demand page table allocation code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Disabling the round-robin allocator results in reusing the same dma-addresses again very fast. This is a good test if the iotlb flushing is working correctly. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This parameter is not longer necessary when aperture increases dynamically. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
By dynamically increasing the aperture the extended allocator is now ready for use. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch makes sure no reserved addresses are allocated in an dma_ops domain when the aperture is increased dynamically. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch prepares the dynamic increasement of dma_ops domain apertures. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Simplify the code a little bit by using the same unit for all address space related state in the dma_ops domain structure. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch changes the AMD IOMMU address allocator to allow up to 32 aperture ranges per dma_ops domain. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The code will be required when the aperture size increases dynamically in the extended address allocator. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch makes page table allocation usable for dma_ops code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This is a preperation for extended address allocator. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This function is required for suspend/resume support with AMD IOMMU enabled. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This function is required for suspend/resume support with AMD IOMMU enabled. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
This patch introduces the for_each_iommu and for_each_iommu_safe macros to simplify the developers life when having to iterate over all AMD IOMMUs in the system. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Chris Wright 提交于
Some drivers may use the dma api during ->remove which will cause a protection domain to get reattached to a device. Delay the detach until after the driver is completely unbound. [ joro: added a little merge helper ] [ Impact: fix too early device<->domain removal ] Signed-off-by: NChris Wright <chrisw@redhat.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 28 5月, 2009 1 次提交
-
-
由 Joerg Roedel 提交于
This information is only helpful for debugging. Don't print it anymore unless explicitly requested. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 24 3月, 2009 1 次提交
-
-
由 Sheng Yang 提交于
This iommu_op can tell if domain have a specific capability, like snooping control for Intel IOMMU, which can be used by other components of kernel to adjust the behaviour. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 05 3月, 2009 1 次提交
-
-
由 FUJITA Tomonori 提交于
We try to avoid this type of ifdef and we can safely remove this ifdef. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 06 1月, 2009 3 次提交
-
-
由 FUJITA Tomonori 提交于
This converts X86 and IA64 to use include/linux/dma-mapping.h. It's a bit large but pretty boring. The major change for X86 is converting 'int dir' to 'enum dma_data_direction dir' in DMA mapping operations. The major changes for IA64 is using map_page and unmap_page instead of map_single and unmap_single. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 FUJITA Tomonori 提交于
This patch converts dma_map_single and dma_unmap_single to use map_page and unmap_page respectively and removes unnecessary map_single and unmap_single in struct dma_mapping_ops. This leaves intel-iommu's dma_map_single and dma_unmap_single since IA64 uses them. They will be removed after the unification. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 FUJITA Tomonori 提交于
This is a preparation of struct dma_mapping_ops unification. We use map_page and unmap_page instead of map_single and unmap_single. We will remove map_single and unmap_single hooks in the last patch in this patchset. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 1月, 2009 14 次提交
-
-
由 Joerg Roedel 提交于
The #ifdef's are no longer necessary when the iommu-api and the amd iommu updates are merged together. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, reduce kernel size a bit, avoid sparse warning Fixes sparse warning: arch/x86/kernel/amd_iommu.c:1299:6: warning: symbol 'prealloc_protection_domains' was not declared. Should it be static? Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see total number of map requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see amount of allocated io memory in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of domain tlb flushes in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of single iommu domain tlb flushes in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of requests for more than one page in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of free_coherent requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of alloc_coherent requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of unmap_sg requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of map_sg requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of unmap_single requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of map_single requests in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: see number of completion wait events in debugfs Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-