@@ -130,7 +130,7 @@ The following uses **mipi_rx_hi35xx.c** as an example to present the information
- Defining a custom structure
To the driver, the custom structure hols parameters and data. The values in the **config** file are used to initialize the structure members. In this example, the MIPI CSI attributes are defined in the source file. Therefore, the basic member structure is similar to that of **MipiCsiCntlr**.
To the driver, the custom structure holds parameters and data. The values in the **config** file are used to initialize the structure members. In this example, the MIPI CSI attributes are defined in the source file. Therefore, the basic member structure is similar to that of **MipiCsiCntlr**.
The Docker image of OpenHarmony is hosted on [HUAWEI CLOUD SWR](https://console.huaweicloud.com/swr/?region=cn-south-1&locale=en-us#/app/warehouse/warehouseMangeDetail/goldensir/openharmony-docker/openharmony-docker?type=ownImage). Using the Docker image will help simplify environment configurations needed for the building. The following describes the detailed procedure.
The Docker image of OpenHarmony is hosted on HUAWEI CLOUD SWR. Using the Docker image will help simplify environment configurations needed for the building. The following describes the detailed procedure.
### Setting Up the Docker Environment for Mini-System Devices \(reference memory ≥ 128 KB\) and Small-System Devices \(reference memory ≥ 1 MB\)<a name="section319412277287"></a>
Congratulations! You have finished all steps! Proceed to [develop a sample WLAN product](https://gitee.com/openharmony/docs/blob/master/en/device-dev/guide/device-wlan.md) to better familiarize yourself with OpenHarmony development.
Congratulations! You have finished all steps! Proceed to [develop a sample WLAN product](../guide/device-wlan-led-control.md) to better familiarize yourself with OpenHarmony development.
> If the message "The boad is not in Loader mode. Please Hold on the VOL+key..." is displayed, place the development board in Loader mode as follows: Press and hold the Volume+ key for 3 seconds, press the RESET key, wait for 3 seconds, and then release the Volume+ key.
> If the message "The board is not in Loader mode. Please Hold on the VOL+key..." is displayed, place the development board in Loader mode as follows: Press and hold the Volume+ key for 3 seconds, press the RESET key, wait for 3 seconds, and then release the Volume+ key.
10. Wait until the burning is complete. If the following message is displayed, the burning is successful.
@@ -48,4 +48,4 @@ After the system is started, copy the executable file **helloworld** in the **ou
## Next
Congratulations! You have finished all steps! Proceed to [develop a sample camera with a screen](https://gitee.com/openharmony/docs/blob/master/en/device-dev/guide/device-camera.md) to better familiarize yourself with OpenHarmony development.
Congratulations! You have finished all steps! Proceed to [develop a sample camera with a screen](../guide/device-camera-control-overview.md) to better familiarize yourself with OpenHarmony development.
Congratulations! You have finished all steps! Proceed to [develop a sample WLAN product](https://gitee.com/openharmony/docs/blob/master/en/device-dev/guide/device-wlan.md) to better familiarize yourself with OpenHarmony development.
Congratulations! You have finished all steps! Proceed to [develop a sample WLAN product](../guide/device-wlan-led-control.md) to better familiarize yourself with OpenHarmony development.
