Frame buffer device drivers that cannot be built as modules must depend on
`FB = y'.  Correct the 3 remaining offenders.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SavagePrintRegs() requires struct savagefb_par.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a hack that seems to kick start the 2D engine of the Savage IX in some
Toshiba laptops.  Without this, the laptop starts with a black screen and
occasionally crashes X.
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pixclock setting in sstfb didn't work with my Voodoo 2 card with ICS 5342 DAC
(this DAC requires two consecutive writes to one of its registers to program
pixclock - maybe first write merged with second).
Signed-off-by: NOndrej Zajicek <santiago@crfreenet.org>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix section mismatch warnings by moving data into __devinitdata section.
Add __devinit to two initialization functions.
Signed-off-by: NRobert Reif <reif@earthlink.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix section mismatch warning by moving data into __devinitdata section.
Add __devinit to an initialization function.
Signed-off-by: NRobert Reif <reif@earthlink.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix locomo backlight conversion error and subsequent compile failure
from commit 599a52d1.
Signed-off-by: NRIchard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the following error if FB_DDC=n

Kernel: arch/x86_64/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 229 modules
WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined!
make[1]: *** [__modpost] Error 1
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix implicit declarations and missing code in atyfb.

drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a
ty_ld_lcd'
drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a
ty_st_lcd'
atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd'
atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init':
drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type'
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CT based mach64 cards were reported to hang on sparc64 boxes when
compiled with gcc-4.1.x and later.

Looking at this piece of code, it's no surprise.  A critical
delay was implemented as an empty for() loop, and gcc 4.0.x
and previous did not optimize it away, so we did get a delay.

But gcc-4.1.x and later can optimize it away, and we get crashes.

Use a real udelay() to fix this.  Fix verified on SunBlade100.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following compile error:

  MODPOST 327 modules
WARNING: "aty_st_lcd" [drivers/video/aty/atyfb.ko] undefined!
WARNING: "aty_ld_lcd" [drivers/video/aty/atyfb.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently sm501fb_crtsrc_store() won't allow the routing to be changed via
echos from userspace in to the sysfs file.  The reason for this is that the
strnicmp() for both heads uses a sizeof() for the string length, which ends
up being strlen() + 1 (\0 in the normal case, but the echo gives a newline,
which is where the issue occurs), this then causes a mismatch and
subsequently bails with the -EINVAL.

In addition to this, the hardcoded lengths were then used for the store
length that was returned, which ended up being erroneous and resulting in a
write error.  There's also no point in returning anything but the full
length since it will -EINVAL out on a mismatch well before then anyways.

sizeof("string") is great for making sure you have space in your buffer,
but rather less so for string comparisons :-)
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Enabling the backlight by default appears to cause problems for many
users. This patch disables backlight controls unless explicitly
enabled by users via a module parameter. Since PMAC users are known
to work, default to enabled in that case.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Fix a mix up when the nvidia driver was converted resulting
in the backlight having an incorrect initial brightness.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

If you'll recall, over a year ago, I pointed out that the current
Radeon driver erroneously returns -EINVAL for valid blanking codes,
here is a link to that thread:

	http://lkml.org/lkml/2006/1/28/6

No other driver does this, and it confuses the X server into thinking
that the device does not support blanking properly.

I looked again and there is simply no reason for the Radeon driver to
return -EINVAL for FB_BLANK_NORMAL.  It claims it wants to do this in
order to convince fbcon to blank in software, right here:

			if (fb_blank(info, blank))
				fbcon_generic_blank(vc, info, blank);

to software blank the screen.  But it only causes that to happen
in the FB_BLANK_NORMAL case.

That makes no sense because the Radeon code does this:

		val |= CRTC_DISPLAY_DIS;

in the FB_BLANK_NORMAL case so should be blanking the hardware, and
there is therefore no reason to SW blank by returning -EINVAL.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NAntonino Daplas <adaplas@gmail.com>

ps3: Introduce CONFIG_PS3_ADVANCED, as suggested by Roman Zippel, and use
it to control questions about PS3 subsystems that may not be obvious for
the casual user.

This gets rid of the following warning on non-powerpc platforms: |
drivers/video/Kconfig:1604:warning: 'select' used by config symbol 'FB_PS3'
refer to undefined symbol 'PS3_PS3AV'
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Toralf Förster pointed out that drivers/video/s3fb.c would fail to compile:
> ...
>   CC      drivers/video/s3fb.o
> drivers/video/s3fb.c: In function `s3_pci_remove':
> drivers/video/s3fb.c:1003: warning: unused variable `par'
> drivers/video/s3fb.c: In function `s3fb_setup':
> drivers/video/s3fb.c:1141: error: `mtrr' undeclared (first use in this function)
> drivers/video/s3fb.c:1141: error: (Each undeclared identifier is reported only once
> drivers/video/s3fb.c:1141: error: for each function it appears in.)
> make[2]: *** [drivers/video/s3fb.o] Error 1
> make[1]: *** [drivers/video] Error 2
> make: *** [drivers] Error 2

Here is fix, it also fixes broken boot options.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARNING: drivers/video/i810/i810fb.o - Section mismatch: reference
to .init.data: from .text between 'i810_check_params' (at offset
0x1123) and 'encode_fix'

yres cannot be declared __devinitdata as it is used in
i810_check_params(), which isn't __devinit.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Driver for the Silicon Motion SM501 multifunction device framebuffer
subsystem.

This driver supports both the CRT and LCD panel heads, with some simple
acceleration for the cursor plotting and support for screen panning.  There
is no current support for bitblt/drawing engines, which should be added at
a later date.

This has been tested on a number of configurations, including PCI and
generic-bus, on PPC, ARM and SH4

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NVincent Sanders <vince@arm.linux.org.u.>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove a bogus SYSFS dependency from the backlight class
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Now update_status has locking, we can remove the mutex from corgi_bl.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Per device data such as brightness belongs to the indivdual device
and should therefore be separate from the the backlight operation
function pointers. This patch splits the two types of data and
allows simplifcation of some code.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Move the setting/unsetting of pmac_backlight into the
backlight core instead of doing it in each driver.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Improve backlight selection for fbdev drivers
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

fb_info->bl_mutex is badly thought out and the backlight class doesn't
need it if the framebuffer/backlight register/unregister order is
consistent, particularly after the backlight locking fixes.

Fix the drivers to use the order:

backlight_device_register()
register_framebuffer()
unregister_framebuffer()
backlight_device_unregister()

and turn bl_mutex into a lock for the bl_curve data only.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

The backlight core listens for blanking events and triggers a
backlight_update_status call so these extra calls are not
needed and can be removed.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove uneeded update_status call from chipsfb.c since the
backlight core now receives software blanking notifications
too.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

The backlight class wants notification whenever the console is blanked
but doesn't get this when hardware blanking fails and software blanking
is used. Changing FB_EVENT_BLANK to report both would be a behaviour
change which could confuse the console layer so add a new event for
software blanking and have the backlight class listen for both.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Currently its possible to build the backlight core as a module yet
compile the drivers into the kernel which gives missing symbols.

Fix.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

nvidia_bl_set_power isn't needed since the backlight class handles
this by receiving fb events itself and calling update_status so
remove it.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Convert internal semaphore to a mutex
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

backlight_device->sem has a very specific use as documented in the
header file. The external users of this are using it for a different
reason, to serialise access to the update_status() method.

backlight users were supposed to implement their own internal
serialisation of update_status() if needed but everyone is doing
things differently and incorrectly. Therefore add a global mutex to
take care of serialisation for everyone, once and for all.

Locking for get_brightness remains optional since most users don't
need it.

Also update the lcd class in a similar way.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Since people use this code as an example, clean it up to
to use platform_*_drvdata instead of a global variable.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Since people use this code as an example, clean it up to
to use platform_*_drvdata and remove an unneeded function.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove excessive numbers of (un)likely()s in the backlight core.

There are no hot paths in this code so rely on compiler to do
the right thing.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Remove uneeded owner field from backlight_properties structure.

Nothing uses it and it is unlikely that it will ever be used. The
backlight class uses other means to ensure that nothing references
unloaded code.

Based on a patch from Dmitry Torokhov <dtor@insightbb.com>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Fix error handling when registering new device
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>