backlight: Improve backlight selection for fbdev drivers

Improve backlight selection for fbdev drivers
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

drivers/video/Kconfig

@@ -4,20 +4,9 @@
 
 menu "Graphics support"
 
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       default y
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
+if SYSFS
+	source "drivers/video/backlight/Kconfig"
+endif
 
 config FB
 	tristate "Support for frame buffer devices"
@@ -53,9 +42,27 @@ config FB
 	  (e.g. an accelerated X server) and that are not frame buffer
 	  device-aware may cause unexpected results. If unsure, say N.
 
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
 config FB_DDC
        tristate
-       depends on FB && I2C && I2C_ALGOBIT
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
        default n
 
 config FB_CFB_FILLRECT
@@ -134,6 +141,9 @@ config FB_TILEBLITTING
 	 This is particularly important to one driver, matroxfb.  If
 	 unsure, say N.
 
+comment "Frambuffer hardware drivers"
+	depends on FB
+
 config FB_CIRRUS
 	tristate "Cirrus Logic support"
 	depends on FB && (ZORRO || PCI)
@@ -671,6 +681,7 @@ config FB_NVIDIA
 	depends on FB && PCI
 	select I2C_ALGOBIT if FB_NVIDIA_I2C
 	select I2C if FB_NVIDIA_I2C
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -699,8 +710,7 @@ config FB_NVIDIA_I2C
 
 config FB_NVIDIA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_NVIDIA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_NVIDIA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -708,9 +718,8 @@ config FB_NVIDIA_BACKLIGHT
 config FB_RIVA
 	tristate "nVidia Riva support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RIVA_I2C
-	select I2C if FB_RIVA_I2C
 	select FB_DDC if FB_RIVA_I2C
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -747,8 +756,7 @@ config FB_RIVA_DEBUG
 
 config FB_RIVA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RIVA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RIVA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -798,8 +806,6 @@ config FB_I810_GTF
 config FB_I810_I2C
 	bool "Enable DDC Support"
 	depends on FB_I810 && FB_I810_GTF
-	select I2C
-	select I2C_ALGOBIT
 	select FB_DDC
 	help
 
@@ -989,9 +995,8 @@ config FB_MATROX_MULTIHEAD
 config FB_RADEON
 	tristate "ATI Radeon display support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RADEON_I2C
-	select I2C if FB_RADEON_I2C
 	select FB_DDC if FB_RADEON_I2C
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1021,8 +1026,7 @@ config FB_RADEON_I2C
 
 config FB_RADEON_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RADEON && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RADEON
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1042,6 +1046,7 @@ config FB_ATY128
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
 	select FB_MACMODES if PPC_PMAC
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
@@ -1053,8 +1058,7 @@ config FB_ATY128
 
 config FB_ATY128_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY128 && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY128
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1065,6 +1069,7 @@ config FB_ATY
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
 	select FB_MACMODES if PPC
 	help
 	  This driver supports graphics boards with the ATI Mach64 chips.
@@ -1103,8 +1108,7 @@ config FB_ATY_GX
 
 config FB_ATY_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1123,8 +1127,6 @@ config FB_S3
 config FB_SAVAGE
 	tristate "S3 Savage support"
 	depends on FB && PCI && EXPERIMENTAL
-	select I2C_ALGOBIT if FB_SAVAGE_I2C
-	select I2C if FB_SAVAGE_I2C
 	select FB_DDC if FB_SAVAGE_I2C
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
@@ -1639,6 +1641,7 @@ config FB_VIRTUAL
 	  the vfb_enable=1 option.
 
 	  If unsure, say N.
+
 if VT
 	source "drivers/video/console/Kconfig"
 endif
@@ -1647,9 +1650,5 @@ if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
 endif
 
-if SYSFS
-	source "drivers/video/backlight/Kconfig"
-endif
-
 endmenu