- 22 5月, 2014 1 次提交
-
-
由 Tom Gundersen 提交于
Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: NTom Gundersen <teg@jklm.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). Note that netdev_priv(dev) cannot bu NULL, hence we can remove these useless checks. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c92 ("vxlan: keep original skb ownership") Reported-by: Nlucien xin <lucien.xin@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
Bug introduced by commit 7d442fab ("ipv4: Cache dst in tunnels"). Because sit code does not call ip_tunnel_init(), the dst_cache was not initialized. CC: Tom Herbert <therbert@google.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2014 1 次提交
-
-
由 WANG Cong 提交于
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2014 1 次提交
-
-
由 Li RongQing 提交于
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 1 次提交
-
-
由 Li RongQing 提交于
when read/write the 64bit data, the correct lock should be hold. Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 12月, 2013 1 次提交
-
-
由 Li RongQing 提交于
if a dst is not attached to anywhere, it should be released before exit ipip6_tunnel_xmit, otherwise cause dst memory leakage. Fixes: 61c1db7f ("ipv6: sit: add GSO/TSO support") Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
While testing my changes for TSO support in SIT devices, I was using sit0 tunnel which appears to include nopmtudisc flag. But using : ip tun add sittun mode sit remote $REMOTE_IPV4 local $LOCAL_IPV4 \ dev $IFACE We get a tunnel which rejects too long packets because of the mtu check which is not yet GSO aware. erd:~# ip tunnel sittun: ipv6/ip remote 10.246.17.84 local 10.246.17.83 ttl inherit 6rd-prefix 2002::/16 sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 This patch is based on an excellent report from Michal Shmidt. In the future, we probably want to extend the MTU check to do the right thing for GSO packets... Fixes: ("61c1db7f ipv6: sit: add GSO/TSO support") Reported-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2013 1 次提交
-
-
由 Gao feng 提交于
In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2013 1 次提交
-
-
由 Oussama Ghorbel 提交于
Send icmpv6 error with type "destination unreachable" and code "address unreachable" when receiving icmpv4 error and sufficient data bytes are available This patch enhances the compliance of sit tunnel with section 3.4 of rfc 4213 Signed-off-by: NOussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2013 1 次提交
-
-
由 Willem de Bruijn 提交于
Bug: The fallback device is created in sit_init_net and assumed to be freed in sit_exit_net. First, it is dereferenced in that function, in sit_destroy_tunnels: struct net *net = dev_net(sitn->fb_tunnel_dev); Prior to this, rtnl_unlink_register has removed all devices that match rtnl_link_ops == sit_link_ops. Commit 205983c4 added the line + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; which cases the fallback device to match here and be freed before it is last dereferenced. Fix: This commit adds an explicit .delllink callback to sit_link_ops that skips deallocation at rtnl_unlink_register for the fallback device. This mechanism is comparable to the one in ip_tunnel. It also modifies sit_destroy_tunnels and its only caller sit_exit_net to avoid the offending dereference in the first place. That double lookup is more complicated than required. Test: The bug is only triggered when CONFIG_NET_NS is enabled. It causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that this bug exists at the mentioned commit, at davem-net HEAD and at 3.11.y HEAD. Verified that it went away after applying this patch. Fixes: 205983c4 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2013 1 次提交
-
-
由 John Stultz 提交于
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 10月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
rtnl ops where introduced by ba3e3f50 ("sit: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 5e6700b3 ("sit: add support of x-netns")). Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2013 1 次提交
-
-
由 Catalin\(ux\) M. BOIE 提交于
When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: NCatalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2013 4 次提交
-
-
由 Nicolas Dichtel 提交于
The goal of this patch is to harmonize cleanup done on a skbuff on rx path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
The goal of this patch is to harmonize cleanup done on a skbuff on xmit path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This function was only used when a packet was sent to another netns. Now, it can also be used after tunnel encapsulation or decapsulation. Only skb_orphan() should not be done when a packet is not crossing netns. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This argument is not used, let's remove it. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2013 1 次提交
-
-
由 Li Hongjun 提交于
Since commit 3d7b46cd (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: NLi Hongjun <hongjun.li@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
When pushing a new header before current one call skb_reset_inner_headers to record the position of the inner headers in the various ipv6 tunnel protocols. We later need this to correctly identify the addresses needed to send back an error in the xfrm layer. This change is safe, because skb->protocol is always checked before dereferencing data from the inner protocol. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 15 8月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
It's better to use available helpers for these tests. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
The device can stand in another netns, hence we need to do the lookup in netns tunnel->net. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
Because of commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets for 2002::/16 destinations and sources even when configured to work as a tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing checks if the device is not in pointopoint mode. This was an oversight from me in the above commit, sorry. Thanks to Roman Mamedov for reporting this! Reported-by: NRoman Mamedov <rm@romanrm.ru> Cc: David Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 3 次提交
-
-
由 Nicolas Dichtel 提交于
The use of this attribute has been added in 32b8a8e5 (sit: add IPv4 over IPv4 support). It is optional, by default proto is IPPROTO_IPV6. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2013 2 次提交
-
-
由 Pravin B Shelar 提交于
Use common function get calculate rtnl_link_stats64 stats. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2013 1 次提交
-
-
由 Cong Wang 提交于
With recent patches from Pravin, most tunnels can't use iptunnel_xmit() any more, due to ip_select_ident() and skb->ip_summed. But we can just move these operations out of iptunnel_xmit(), so that tunnels can use it again. This by the way fixes a bug in vxlan (missing nf_reset()) for net-next. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
This is already checked by the caller (tunnel64_rcv) and brings ipip6_rcv in line with ipip_rcv. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2012 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 11月, 2012 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2012 1 次提交
-
-
由 Nicolas Dichtel 提交于
This change fixes several sparse warnings about endianness problem. The wrong nla_*() functions were used. It also fix a sparse warning about a flag test (field i_flags). This field is used in this file like a local flag only, so it is more an u16 (gre uses it as a be16). This sparse warning was already there before the patch that add netlink management, the code has just been moved. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2012 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch add the support of 'ip link .. type sit'. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-