- 22 5月, 2014 1 次提交
-
-
由 Tom Gundersen 提交于
Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: NTom Gundersen <teg@jklm.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2014 1 次提交
-
-
由 Julia Lawall 提交于
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 5月, 2014 1 次提交
-
-
由 WANG Cong 提交于
Fengguang reported the following sparse warning: >> net/ipv6/proc.c:198:41: sparse: incorrect type in argument 1 (different address spaces) net/ipv6/proc.c:198:41: expected void [noderef] <asn:3>*mib net/ipv6/proc.c:198:41: got void [noderef] <asn:3>**pcpumib Fixes: commit 698365fa (net: clean up snmp stats code) Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2014 5 次提交
-
-
由 Lorenzo Colitti 提交于
When using mark-based routing, sockets returned from accept() may need to be marked differently depending on the incoming connection request. This is the case, for example, if different socket marks identify different networks: a listening socket may want to accept connections from all networks, but each connection should be marked with the network that the request came in on, so that subsequent packets are sent on the correct network. This patch adds a sysctl to mark TCP sockets based on the fwmark of the incoming SYN packet. If enabled, and an unmarked socket receives a SYN, then the SYN packet's fwmark is written to the connection's inet_request_sock, and later written back to the accepted socket when the connection is established. If the socket already has a nonzero mark, then the behaviour is the same as it is today, i.e., the listening socket's fwmark is used. Black-box tested using user-mode linux: - IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the mark of the incoming SYN packet. - The socket returned by accept() is marked with the mark of the incoming SYN packet. - Tested with syncookies=1 and syncookies=2. Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Colitti 提交于
Currently, routing lookups used for Path PMTU Discovery in absence of a socket or on unmarked sockets use a mark of 0. This causes PMTUD not to work when using routing based on netfilter fwmark mangling and fwmark ip rules, such as: iptables -j MARK --set-mark 17 ip rule add fwmark 17 lookup 100 This patch causes these route lookups to use the fwmark from the received ICMP error when the fwmark_reflect sysctl is enabled. This allows the administrator to make PMTUD work by configuring appropriate fwmark rules to mark the inbound ICMP packets. Black-box tested using user-mode linux by pointing different fwmarks at routing tables egressing on different interfaces, and using iptables mangling to mark packets inbound on each interface with the interface's fwmark. ICMPv4 and ICMPv6 PMTU discovery work as expected when mark reflection is enabled and fail when it is disabled. Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Colitti 提交于
Kernel-originated IP packets that have no user socket associated with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.) are emitted with a mark of zero. Add a sysctl to make them have the same mark as the packet they are replying to. This allows an administrator that wishes to do so to use mark-based routing, firewalling, etc. for these replies by marking the original packets inbound. Tested using user-mode linux: - ICMP/ICMPv6 echo replies and errors. - TCP RST packets (IPv4 and IPv6). Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lee 提交于
After all the preparatory works, supporting IPv6 in Fast Open is now easy. We pretty much just mirror v4 code. The only difference is how we generate the Fast Open cookie for IPv6 sockets. Since Fast Open cookie is 128 bits and we use AES 128, we use CBC-MAC to encrypt both the source and destination IPv6 addresses since the cookie is a MAC tag. Signed-off-by: NDaniel Lee <longinus00@gmail.com> Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NJerry Chu <hkchu@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
If a fast open socket is already accepted by the user, it should be treated like a connected socket to record the ICMP error in sk_softerr, so the user can fetch it. Do that in both tcp_v4_err and tcp_v6_err. Also refactor the sequence window check to improve readability (e.g., there were two local variables named 'req'). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDaniel Lee <longinus00@gmail.com> Signed-off-by: NJerry Chu <hkchu@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2014 1 次提交
-
-
由 WANG Cong 提交于
As suggested by several people, rename local_df to ignore_df, since it means "ignore df bit if it is set". Cc: Maciej Żenczykowski <maze@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2014 1 次提交
-
-
由 Duan Jiong 提交于
the parameter rt will be assigned to c.arg in function fib6_clean_tree(), but function fib6_prune_clone() doesn't use c.arg, so we can remove it safely. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2014 4 次提交
-
-
由 Tom Herbert 提交于
Moving validation of UDP checksum to be done in UDP not encap layer. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Use skb_checksum_validate to verify checksum. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergey Popovich 提交于
Dst is released one line before we access it again with dst->error. Fixes: 58e35d14 netfilter: ipv6: propagate routing errors from ip6_route_me_harder() Signed-off-by: NSergey Popovich <popovich_sergei@mail.ru> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 08 5月, 2014 2 次提交
-
-
由 WANG Cong 提交于
commit 8f0ea0fe (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f5 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
If conntrack defragments incoming ipv6 frags it stores largest original frag size in ip6cb and sets ->local_df. We must thus first test the largest original frag size vs. mtu, and not vice versa. Without this patch PKTTOOBIG is still generated in ip6_fragment() later in the stack, but 1) IPSTATS_MIB_INTOOBIGERRORS won't increment 2) packet did (needlessly) traverse netfilter postrouting hook. Fixes: fe6cc55f ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2014 4 次提交
-
-
由 Tom Herbert 提交于
Commit 4068579e ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6)") introduced zero checksums being allowed for IPv6, but in the case that a socket disallows a zero checksum on RX we need to sock_put. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is no longer used after commit e837735e (ip6_tunnel: ensure to always have a link local address). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
RFC 6936 relaxes the requirement of RFC 2460 that UDP/IPv6 packets which are received with a zero UDP checksum value must be dropped. RFC 6936 allows zero checksums to support tunnels over UDP. When sk_no_check is set we allow on a socket we allow a zero IPv6 UDP checksum. This is for both sending zero checksum and accepting a zero checksum on receive. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Call skb_checksum_init instead of private functions. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2014 1 次提交
-
-
由 Lorenzo Colitti 提交于
This replaces 6 identical code snippets with a call to a new static inline function. Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2014 1 次提交
-
-
由 Julian Anastasov 提交于
To properly match iif in ip rules we have to provide LOOPBACK_IFINDEX in flowi6_iif, not 0. Some ip6mr_fib_lookup and fib6_rule_lookup callers need such fix. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2014 1 次提交
-
-
由 Kumar Sundararajan 提交于
When the ipv6 fib changes during a table dump, the walk is restarted and the number of nodes dumped are skipped. But the existing code doesn't advance to the next node after a node is skipped. This can cause the dump to loop or produce lots of duplicates when the fib is modified during the dump. This change advances the walk to the next node if the current node is skipped after a restart. Signed-off-by: NKumar Sundararajan <kumar@fb.com> Signed-off-by: NChris Mason <clm@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2014 1 次提交
-
-
由 Heiner Kallweit 提交于
Userspace applications can use IFA_F_MANAGETEMPADDR with RTM_NEWADDR already to indicate that the kernel should take care of temporary address management. This patch adds related functionality to RTM_DELADDR. By setting IFA_F_MANAGETEMPADDR a userspace application can indicate that the kernel should delete all related temporary addresses as well. A corresponding patch for the "ip addr del" command has been applied to iproute2 already. Signed-off-by: NHeiner Kallweit <heiner.kallweit@web.de> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2014 3 次提交
-
-
由 Nicolas Dichtel 提交于
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Because the netdevice may be in another netns than the i/o netns, we should use the i/o netns instead of dev_net(dev). Note that netdev_priv(dev) cannot bu NULL, hence we can remove these useless checks. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
As suggested by Julian: Simply, flowi4_iif must not contain 0, it does not look logical to ignore all ip rules with specified iif. because in fib_rule_match() we do: if (rule->iifindex && (rule->iifindex != fl->flowi_iif)) goto out; flowi4_iif should be LOOPBACK_IFINDEX by default. We need to move LOOPBACK_IFINDEX to include/net/flow.h: 1) It is mostly used by flowi_iif 2) Fix the following compile error if we use it in flow.h by the patches latter: In file included from include/linux/netfilter.h:277:0, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:21, from include/linux/netdevice.h:43, from include/linux/icmpv6.h:12, from include/linux/ipv6.h:61, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:27, from include/linux/nfs_fs.h:30, from init/do_mounts.c:32: include/net/flow.h: In function ‘flowi4_init_output’: include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function) Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 3 次提交
-
-
由 Nicolas Dichtel 提交于
It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c92 ("vxlan: keep original skb ownership") Reported-by: Nlucien xin <lucien.xin@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d59 ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d59 ("l2tp: keep original skb ownership") Reported-by: NZhan Jianyu <nasa4836@gmail.com> Tested-by: NZhan Jianyu <nasa4836@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by: NFrancois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2014 1 次提交
-
-
由 Lorenzo Colitti 提交于
net-next commit 9c76a114, ipv6: tcp_ipv6 policy route issue, had a boolean logic error that caused incorrect behaviour for TCP SYN+ACK when oif-based rules are in use. Specifically: 1. If a SYN comes in from a global address, and sk_bound_dev_if is not set, the routing lookup has oif set to the interface the SYN came in on. Instead, it should have oif unset, because for global addresses, the incoming interface doesn't necessarily have any bearing on the interface the SYN+ACK is sent out on. 2. If a SYN comes in from a link-local address, and sk_bound_dev_if is set, the routing lookup has oif set to the interface the SYN came in on. Instead, it should have oif set to sk_bound_dev_if, because that's what the application requested. Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2014 1 次提交
-
-
由 Thomas Graf 提交于
All xtables variants suffer from the defect that the copy_to_user() to copy the counters to user memory may fail after the table has already been exchanged and thus exposed. Return an error at this point will result in freeing the already exposed table. Any subsequent packet processing will result in a kernel panic. We can't copy the counters before exposing the new tables as we want provide the counter state after the old table has been unhooked. Therefore convert this into a silent error. Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 01 4月, 2014 5 次提交
-
-
由 Hannes Frederic Sowa 提交于
After commit c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") some counters are now updated in process context and thus need to disable bh before doing so, otherwise deadlocks can happen on 32-bit archs. Fabio Estevam noticed this while while mounting a NFS volume on an ARM board. As a compensation for missing this I looked after the other *_STATS_BH and found three other calls which need updating: 1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling) 2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ... (only in case of icmp protocol with raw sockets in error handling) 3) ping6_v6_sendmsg (error handling) Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") Reported-by: NFabio Estevam <festevam@gmail.com> Tested-by: NFabio Estevam <fabio.estevam@freescale.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
First off, we don't need to check for non-NULL rt any more, as we are guaranteed to always get a valid rt6_info. Drop the check. In case we couldn't allocate an inet_peer for fragmentation information we currently generate strictly incrementing fragmentation ids for all destination. This is done to maximize the cycle and avoid collisions. Those fragmentation ids are very predictable. At least we should try to mix in the destination address. While it should make no difference to simply use a PRNG at this point, secure_ipv6_id ensures that we don't leak information from prandom, so its internal state could be recoverable. This fallback function should normally not get used thus this should not affect performance at all. It is just meant as a safety net. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
The issue raises when adding policy route, specify a particular NIC as oif, the policy route did not take effect. The reason is that fl6.oif is not set and route map failed. From the tcp_v6_send_response function, if the binding address is linklocal, fl6.oif is set, but not for global address. Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Move the whole rt6_need_strict as static inline into ip6_route.h, so that it can be reused Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Yufen 提交于
Signed-off-by: NWang Yufen <wangyufen@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2014 1 次提交
-
-
由 Wang Yufen 提交于
ERROR: "(foo*)" should be "(foo *)" ERROR: "foo * bar" should be "foo *bar" Suggested-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NWang Yufen <wangyufen@huawei.com> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-