int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...

The standard naming for such attributes is 'irq' - so rename the following
fields and macros:

 int_delivery_mode => irq_delivery_mode
 INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
 int_dest_mode     => irq_dest_mode
 INT_DEST_MODE     => IRQ_DEST_MODE
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- reorder fields so that they appear in struct genapic field ordering

- add zero-initialized fields too so that it's apparent which functionality
  is default / missing.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Make the following uv related cleanups.

* collect visible uv related definitions and interfaces into uv/uv.h
  and use it.  this cleans up the messy situation where on 64bit, uv
  is defined properly, on 32bit generic it's dummy and on the rest
  undefined.  after this clean up, uv is defined on 64 and dummy on
  32.

* update uv_flush_tlb_others() such that it takes cpumask of
  to-be-flushed cpus as argument, instead of that minus self, and
  returns yet-to-be-flushed cpumask, instead of modifying the passed
  in parameter.  this interface change will ease dummy implementation
  of uv_flush_tlb_others() and makes uv tlb flush related stuff
  defined in tlb_uv proper.
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: fix potential APIC crash

In determining the destination apicid, there are usually three cpumasks
that are considered: the incoming cpumask arg, cfg->domain and the
cpu_online_mask.  Since we are just introducing the cpu_mask_to_apicid_and
function, make sure it includes the cpu_online_mask in it's evaluation.
[Added with this patch.]

There are two io_apic.c functions that did not previously use the
cpu_online_mask:  setup_IO_APIC_irq and msi_compose_msg.  Both of these
simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but
one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask,
so the behavior is identical for all cases.

[*: NUMAQ bug?]

Note that alloc_cpumask_var is only used for the 32-bit cases where
it's highly likely that the cpumask set size will be small and therefore
CPUMASK_OFFSTACK=n.  But if that's not the case, failing the allocate
will cause the same return value as the default.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch simply changes cpumask_t to struct cpumask and similar
trivial modernizations.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: use updated APIs

Various API updates for x86:add-cpu_mask_to_apicid_and

(Note: separate because previous patch has been "backported" to 2.6.27.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>

Impact: new API

Add a helper function that takes two cpumask's, and's them and then
returns the apicid of the result.  This removes a need in io_apic.c
that uses a temporary cpumask to hold (mask & cfg->domain).
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

Impact: fix UV boot crash

This fixes a UV bug related to generating global memory addresses
on partitioned systems. Partition systems do not have physical memory
at address 0. Instead, a chunk of high memory is remapped by the chipset
so that it appears to be at address 0. This remapping is INVISIBLE to most
of the OS. The only OS functions that need to be aware of the remaping are
functions that directly interface to the chipset. The GRU is one example.

Also, delete a couple of unused macros related to global memory addresses.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, reduce size of the kernel image a bit

Fix:

  arch/x86/kernel/genx2apic_uv_x.c:403: warning: 'uv_heartbeat_disable' defined but not used

the function is only used when CONFIG_HOTPLUG_CPU is defined.
Signed-off-by: NRichard A. Holden III <aciddeath@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix double entry creation in /proc

There is a collision between two UV functions:
  both uv_ptc_init() and gru_proc_init() try to make /proc/sgi_uv

So move it's creation to a single place: uv_system_init()
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Change UV heartbeat function to use idle_cpu to determine cpu's
"idleness".  Realign uv_hub definitions.
Signed-of-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: on SGI UV platforms, fix boot crash

UV initialization is currently called too late to call alloc_bootmem_pages().
The current sequence is:

 start_kernel()
   mem_init()
     free_all_bootmem()           <--- discard of bootmem
   rest_init()
     kernel_init()
       smp_prepare_cpus()
       native_smp_prepare_cpus()
         uv_system_init()         <--- uses alloc_bootmem_pages()

It should be calling kmalloc().
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: start per CPU heartbeat LED timers on SGI UV systems

The SGI UV system has no LEDS but uses one of the system controller
regs to indicate the online internal state of the cpu.  There is a
heartbeat bit indicating that the cpu is responding to interrupts,
and an idle bit indicating whether the cpu is idle when the heartbeat
interrupt occurs.  The current period is one second.

When a cpu panics, an error code is written by BIOS to this same reg.

This patchset provides the following:

  * x86_64: Add base functionality for writing to the specific SCIR's
    for each cpu.

  * heartbeat: Invert "heartbeat" bit to indicate the cpu is
    "interruptible".  If the current thread is the idle thread,
    then indicate system is "idle".

  * if hotplug enabled, all bits are set (0xff) when the cpu is disabled.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup only, no functionality changed

WARNING: vmlinux.o(.data+0xbf08): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .init.text:uv_acpi_madt_oem_check()
The variable apic_x2apic_uv_x references
the function __init uv_acpi_madt_oem_check()
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use consistent names for region size and conherence id on x86 and ia64.

The SGI xp drivers are used on both ia64 and x86.  Using the same
names (sn_coherency_id, sn_region_size) simplies the driver code.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a bios call to return partitioning related info.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the EFI callback function and associated wrapper code.
Initialize SAL system table entry info at boot time.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NPaul Jackson <pj@sgi.com>
Acked-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix problem caused by reordering of the calls to uv_cpu_init() &
uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init.
This order was recently broken as a side-effect of other patches.

With this patch, initialization of cpu 0 is now done by the system_init
call.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add functions that use the infrastructure added by the x2apic code. These
functions were originally stubbed out since the UV code went into the
tree prior to the x2apic code.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix the size of the mappings of UV hub registers. Size must
be a function of the maximum node number within the SSI.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init()
The function __cpuinit uv_cpu_init() references
a function __init uv_system_init().
If uv_system_init is only used by uv_cpu_init then
annotate uv_system_init with a matching annotation.

uv_system_init was ment to be called only once, so do it from codepath
(native_smp_prepare_cpus) which is called once, right before activation
of other cpus (smp_init).

Note: old code relied on uv_node_to_blade being initialized to 0,
but it'a not initialized from anywhere.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

WARNING: vmlinux.o(.text+0x14cf8): Section mismatch in reference from the function map_high() to the function .init.text:init_extra_mapping_uc()
The function map_high() references
the function __init init_extra_mapping_uc().
This is often because map_high lacks a __init
annotation or the annotation of init_extra_mapping_uc is wrong.

WARNING: vmlinux.o(.text+0x14d05): Section mismatch in reference from the function map_high() to the function .init.text:init_extra_mapping_wb()
The function map_high() references
the function __init init_extra_mapping_wb().
This is often because map_high lacks a __init
annotation or the annotation of init_extra_mapping_wb is wrong.

map_high is called only from __init functions (map_*_high)
and calls 2 __init_functions (init_extra_mapping_*)
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

it is for uv only
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Removed duplicated include file <linux/kernel.h> in
arch/x86/kernel/genx2apic_uv_x.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

introducing an APIC handling probing abstraction:

 static struct genapic *apic_probe[] __initdata = {
	&apic_x2apic_uv_x,
	&apic_x2apic_phys,
	&apic_x2apic_cluster,
	&apic_physflat,
	NULL,
 };

This way we can remove UV, x2apic specific code from genapic_64.c and
move them to their specific genapic files.

[ v2: fix compiling when CONFIG_ACPI is not set ]
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * Replace NR_CPUS loop with for_each_possible_cpu().

  * nr_cpu_ids should be used to determine if a percpu area is
    available for a given cpu.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Real-time code needs to know the number of cycles per second
on SGI UV.  The information is provided via a run time BIOS
call.  This patch provides the linux side of that interface.
This is the first of several run time BIOS calls to be defined
in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now.  The bios
side is being worked on.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

generalize the x2apic code some more.

let read_apic_id become a macro (later on a function/inline)
GET_APIC_ID(apic_read(APIC_ID))

  +#define read_apic_id()  (GET_APIC_ID(apic_read(APIC_ID)))

instead of this weird construct:

  -#define read_apic_id  (genapic->read_apic_id)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Andrew says:
> There's no point in declaring it inline if it's always called indirectly.

And point taken!
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the read_apic_id()  to genapic routines.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create page table entries to map the SGI UV chipset GRU. local MMR &
global MMR ranges.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update the UV address macros to better describe the
fields of UV physical addresses. Improve comments
in the header files. Add additional MMR definitions.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch changes smpboot.c so that it can start slave cpus running
in UV non-unique apicid mode. The SIPI must be sent using a UV-specific
mechanism.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

UV supports really big systems. So big, in fact, that the APICID register
does not contain enough bits to contain an APICID that is unique across all
cpus.

The UV BIOS supports 3 APICID modes:

	- legacy mode. This mode uses the old APIC mode where
	  APICID is in bits [31:24] of the APICID register.

	- x2apic mode. This mode is whitebox-compatible. APICIDs
	  are unique across all cpus. Standard x2apic APIC operations
	  (Intel-defined) can be used for IPIs. The node identifier
	  fits within the Intel-defined portion of the APICID register.

	- x2apic-uv mode. In this mode, the APICIDs on each node have
	  unique IDs, but IDs on different node are not unique. For example,
	  if each mode has 32 cpus, the APICIDs on each node might be
	  0 - 31. Every node has the same set of IDs.
	  The UV hub is used to route IPIs/interrupts to the correct node.
	  Traditional APIC operations WILL NOT WORK.

In x2apic-uv mode, the ACPI tables all contain a full unique ID (note:
exact bit layout still changing but the following is close):

	nnnnnnnnnnlc0cch
		n = unique node number
		l = socket number on board
		c = core
		h = hyperthread

Only the "lc0cch" bits are written to the APICID register. The remaining bits are
supplied by having the get_apic_id() function "OR" the extra bits into the value
read from the APICID register. (Hmmm.. why not keep the ENTIRE APICID register
in per-cpu data....)

The x2apic-uv mode is recognized by the MADT table containing:
	  oem_id = "SGI"
	  oem_table_id = "UV-X"
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>