Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 22 1月, 2015 1 次提交
  3. 16 12月, 2014 1 次提交
  5. 10 11月, 2014 1 次提交
  7. 05 11月, 2014 1 次提交
  9. 19 10月, 2014 1 次提交
  11. 03 10月, 2014 1 次提交
  13. 24 9月, 2014 3 次提交
    • W
      sched: Fix unreleased llc_shared_mask bit during CPU hotplug · 03bd4e1f
      由 Wanpeng Li 提交于 
      The following bug can be triggered by hot adding and removing a large number of
xen domain0's vcpus repeatedly:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group
	PGD 5a9d5067 PUD 13067 PMD 0
	Oops: 0000 [#3] SMP
	[...]
	Call Trace:
	load_balance
	? _raw_spin_unlock_irqrestore
	idle_balance
	__schedule
	schedule
	schedule_timeout
	? lock_timer_base
	schedule_timeout_uninterruptible
	msleep
	lock_device_hotplug_sysfs
	online_store
	dev_attr_store
	sysfs_write_file
	vfs_write
	SyS_write
	system_call_fastpath

Last level cache shared mask is built during CPU up and the
build_sched_domain() routine takes advantage of it to setup
the sched domain CPU topology.

However, llc_shared_mask is not released during CPU disable,
which leads to an invalid sched domainCPU topology.

This patch fix it by releasing the llc_shared_mask correctly
during CPU disable.

Yasuaki also reported that this can happen on real hardware:

  https://lkml.org/lkml/2014/7/22/1018

His case is here:

	==
	Here is an example on my system.
	My system has 4 sockets and each socket has 15 cores and HT is
	enabled. In this case, each core of sockes is numbered as
	follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89
	Socket#2 | 30-44, 90-104
	Socket#3 | 45-59, 105-119

	Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.

	It means that last level cache of Socket#2 is shared with
	CPU#30-44 and 90-104.

	When hot-removing socket#2 and #3, each core of sockets is
	numbered as follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89

	But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30
	remains having 0x3fff80000001fffc0000000.

	After that, when hot-adding socket#2 and #3, each core of
	sockets is numbered as follows:

		 | CPU#
	Socket#0 | 0-14 , 60-74
	Socket#1 | 15-29, 75-89
	Socket#2 | 30-59
	Socket#3 | 90-119

	Then llc_shared_mask of CPU#30 becomes
	0x3fff8000fffffffc0000000. It means that last level cache of
	Socket#2 is shared with CPU#30-59 and 90-104. So the mask has
	the wrong value.
Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: NLinn Crosetto <linn@hp.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      03bd4e1f
    • L
      x86/smpboot: Speed up suspend/resume by avoiding 100ms sleep for CPU offline during S3 · 2ed53c0d
      由 Lan Tianyu 提交于 
      With certain kernel configurations, CPU offline consumes more than
100ms during S3.

It's a timing related issue: native_cpu_die() would occasionally fall
into a 100ms sleep when the CPU idle loop thread marked the CPU state
to DEAD too slowly.

What native_cpu_die() does is that it polls the CPU state and waits
for 100ms if CPU state hasn't been marked to DEAD. The 100ms sleep
doesn't make sense and is purely historic.

To avoid such long sleeping, this patch adds a 'struct completion'
to each CPU, waits for the completion in native_cpu_die() and wakes
up the completion when the CPU state is marked to DEAD.

Tested on an Intel Xeon server with 48 cores, Ivybridge and on
Haswell laptops. The CPU offlining cost on these machines is
reduced from more than 100ms to less than 5ms. The system
suspend time is reduced by 2.3s on the servers.

Borislav and Prarit also helped to test the patch on an AMD
machine and a few systems of various sizes and configurations
(multi-socket, single-socket, no hyper threading, etc.). No
issues were seen.
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: srostedt@redhat.com
Cc: toshi.kani@hp.com
Cc: imammedo@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409039025-32310-1-git-send-email-tianyu.lan@intel.com
[ Improved a few minor details in the code, cleaned up the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      2ed53c0d
    • D
      x86, sched: Add new topology for multi-NUMA-node CPUs · cebf15eb
      由 Dave Hansen 提交于 
      I'm getting the spew below when booting with Haswell (Xeon
E5-2699 v3) CPUs and the "Cluster-on-Die" (CoD) feature enabled
in the BIOS.  It seems similar to the issue that some folks from
AMD ran in to on their systems and addressed in this commit:

  161270fc ("x86/smp: Fix topology checks on AMD MCM CPUs")

Both these Intel and AMD systems break an assumption which is
being enforced by topology_sane(): a socket may not contain more
than one NUMA node.

AMD special-cased their system by looking for a cpuid flag.  The
Intel mode is dependent on BIOS options and I do not know of a
way which it is enumerated other than the tables being parsed
during the CPU bringup process.  In other words, we have to trust
the ACPI tables <shudder>.

This detects the situation where a NUMA node occurs at a place in
the middle of the "CPU" sched domains.  It replaces the default
topology with one that relies on the NUMA information from the
firmware (SRAT table) for all levels of sched domains above the
hyperthreads.

This also fixes a sysfs bug.  We used to freak out when we saw
the "mc" group cross a node boundary, so we stopped building the
MC group.  MC gets exported as the 'core_siblings_list' in
/sys/devices/system/cpu/cpu*/topology/ and this caused CPUs with
the same 'physical_package_id' to not be listed together in
'core_siblings_list'.  This violates a statement from
Documentation/ABI/testing/sysfs-devices-system-cpu:

	core_siblings: internal kernel map of cpu#'s hardware threads
	within the same physical_package_id.

	core_siblings_list: human-readable list of the logical CPU
	numbers within the same physical_package_id as cpu#.

The sysfs effects here cause an issue with the hwloc tool where
it gets confused and thinks there are more sockets than are
physically present.

Before this patch, there are two packages:

# cd /sys/devices/system/cpu/
# cat cpu*/topology/physical_package_id | sort | uniq -c
     18 0
     18 1

But 4 _sets_ of core siblings:

# cat cpu*/topology/core_siblings_list | sort | uniq -c
      9 0-8
      9 18-26
      9 27-35
      9 9-17

After this set, there are only 2 sets of core siblings, which
is what we expect for a 2-socket system.

# cat cpu*/topology/physical_package_id | sort | uniq -c
     18 0
     18 1
# cat cpu*/topology/core_siblings_list | sort | uniq -c
     18 0-17
     18 18-35

Example spew:
...
	NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
	 #2  #3  #4  #5  #6  #7  #8
	.... node  #1, CPUs:    #9
	------------[ cut here ]------------
	WARNING: CPU: 9 PID: 0 at /home/ak/hle/linux-hle-2.6/arch/x86/kernel/smpboot.c:306 topology_sane.isra.2+0x74/0x90()
	sched: CPU #9's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
	Modules linked in:
	CPU: 9 PID: 0 Comm: swapper/9 Not tainted 3.17.0-rc1-00293-g8e01c4d-dirty #631
	Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014
	0000000000000009 ffff88046ddabe00 ffffffff8172e485 ffff88046ddabe48
	ffff88046ddabe38 ffffffff8109691d 000000000000b001 0000000000000009
	ffff88086fc12580 000000000000b020 0000000000000009 ffff88046ddabe98
	Call Trace:
	[<ffffffff8172e485>] dump_stack+0x45/0x56
	[<ffffffff8109691d>] warn_slowpath_common+0x7d/0xa0
	[<ffffffff8109698c>] warn_slowpath_fmt+0x4c/0x50
	[<ffffffff81074f94>] topology_sane.isra.2+0x74/0x90
	[<ffffffff8107530e>] set_cpu_sibling_map+0x31e/0x4f0
	[<ffffffff8107568d>] start_secondary+0x1ad/0x240
	---[ end trace 3fe5f587a9fcde61 ]---
	#10 #11 #12 #13 #14 #15 #16 #17
	.... node  #2, CPUs:   #18 #19 #20 #21 #22 #23 #24 #25 #26
	.... node  #3, CPUs:   #27 #28 #29 #30 #31 #32 #33 #34 #35
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
[ Added LLC domain and s/match_mc/match_die/ ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: brice.goglin@gmail.com
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/20140918193334.C065EBCE@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      cebf15eb
  15. 16 9月, 2014 1 次提交
  17. 31 7月, 2014 2 次提交
  19. 09 6月, 2014 1 次提交
  21. 05 6月, 2014 3 次提交
    • I
      x86/smpboot: Initialize secondary CPU only if master CPU will wait for it · 3e1a878b
      由 Igor Mammedov 提交于 
      Hang is observed on virtual machines during CPU hotplug,
especially in big guests with many CPUs. (It reproducible
more often if host is over-committed).

It happens because master CPU gives up waiting on
secondary CPU and allows it to run wild. As result
AP causes locking or crashing system. For example
as described here:

   https://lkml.org/lkml/2014/3/6/257

If master CPU have sent STARTUP IPI successfully,
and AP signalled to master CPU that it's ready
to start initialization, make master CPU wait
indefinitely till AP is onlined.
To ensure that AP won't ever run wild, make it
wait at early startup till master CPU confirms its
intention to wait for AP. If AP doesn't respond in 10
seconds, the master CPU will timeout and cancel
AP onlining.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1401975765-22328-4-git-send-email-imammedo@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      3e1a878b
    • I
      x86/smpboot: Log error on secondary CPU wakeup failure at ERR level · feef1e8e
      由 Igor Mammedov 提交于 
      If system is running without debug level logging,
it will not log error if do_boot_cpu() failed to
wakeup AP. It may lead to silent AP bringup
failures at boot time.
Change message level to KERN_ERR to make error
visible to user as it's done on other architectures.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1401975765-22328-3-git-send-email-imammedo@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      feef1e8e
    • I
      x86: Fix list/memory corruption on CPU hotplug · 89f898c1
      由 Igor Mammedov 提交于 
      currently if AP wake up is failed, master CPU marks AP as not
present in do_boot_cpu() by calling set_cpu_present(cpu, false).
That leads to following list corruption on the next physical CPU
hotplug:

[  418.107336] WARNING: CPU: 1 PID: 45 at lib/list_debug.c:33 __list_add+0xbe/0xd0()
[  418.115268] list_add corruption. prev->next should be next (ffff88003dc57600), but was ffff88003e20c3a0. (prev=ffff88003e20c3a0).
[  418.123693] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT ipt_REJECT cfg80211 xt_conntrack rfkill ee
[  418.138979] CPU: 1 PID: 45 Comm: kworker/u10:1 Not tainted 3.14.0-rc6+ #387
[  418.149989] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
[  418.165750] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[  418.166433]  0000000000000021 ffff880038ca7988 ffffffff8159b22d 0000000000000021
[  418.176460]  ffff880038ca79d8 ffff880038ca79c8 ffffffff8106942c ffff880038ca79e8
[  418.177453]  ffff88003e20c3a0 ffff88003dc57600 ffff88003e20c3a0 00000000ffffffea
[  418.178445] Call Trace:
[  418.185811]  [<ffffffff8159b22d>] dump_stack+0x49/0x5c
[  418.186440]  [<ffffffff8106942c>] warn_slowpath_common+0x8c/0xc0
[  418.187192]  [<ffffffff81069516>] warn_slowpath_fmt+0x46/0x50
[  418.191231]  [<ffffffff8136ef51>] ? acpi_ns_get_node+0xb7/0xc7
[  418.193889]  [<ffffffff812f796e>] __list_add+0xbe/0xd0
[  418.196649]  [<ffffffff812e2aa9>] kobject_add_internal+0x79/0x200
[  418.208610]  [<ffffffff812e2e18>] kobject_add_varg+0x38/0x60
[  418.213831]  [<ffffffff812e2ef4>] kobject_add+0x44/0x70
[  418.229961]  [<ffffffff813e2c60>] device_add+0xd0/0x550
[  418.234991]  [<ffffffff813f0e95>] ? pm_runtime_init+0xe5/0xf0
[  418.250226]  [<ffffffff813e32be>] device_register+0x1e/0x30
[  418.255296]  [<ffffffff813e82a3>] register_cpu+0xe3/0x130
[  418.266539]  [<ffffffff81592be5>] arch_register_cpu+0x65/0x150
[  418.285845]  [<ffffffff81355c0d>] acpi_processor_hotadd_init+0x5a/0x9b
...
Which is caused by the fact that generic_processor_info() allocates
logical CPU id by calling:

 cpu = cpumask_next_zero(-1, cpu_present_mask);

which returns id of previously failed to wake up CPU, since its
bit is cleared by do_boot_cpu() and as result register_cpu()
tries to register another CPU with the same id as already
present but failed to be onlined CPU.

Taking in account that AP will not do anything if master CPU
failed to wake it up, there is no reason to mark that AP as not
present and break next cpu hotplug attempts. As a side effect of
not marking AP as not present, user would be allowed to online
it again later.

Also fix memory corruption in acpi_unmap_lsapic()

if during CPU hotplug master CPU failed to wake up AP
it set percpu x86_cpu_to_apicid to BAD_APICID=0xFFFF for AP.

However following attempt to unplug that CPU will lead to
out of bound write access to __apicid_to_node[] which is
32768 items long on x86_64 kernel.

So with above fix of cpu_present_mask make sure that a present
CPU has a valid APIC ID by not setting x86_cpu_to_apicid
to BAD_APICID in do_boot_cpu() on failure and allow
acpi_processor_remove()->acpi_unmap_lsapic() cleanly remove CPU.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1401975765-22328-2-git-send-email-imammedo@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      89f898c1
  23. 05 5月, 2014 1 次提交
  25. 01 5月, 2014 1 次提交
    • H
      x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack · 3891a04a
      由 H. Peter Anvin 提交于 
      The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  This
causes some 16-bit software to break, but it also leaks kernel state
to user space.  We have a software workaround for that ("espfix") for
the 32-bit kernel, but it relies on a nonzero stack segment base which
is not available in 64-bit mode.

In checkin:

    b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

we "solved" this by forbidding 16-bit segments on 64-bit kernels, with
the logic that 16-bit support is crippled on 64-bit kernels anyway (no
V86 support), but it turns out that people are doing stuff like
running old Win16 binaries under Wine and expect it to work.

This works around this by creating percpu "ministacks", each of which
is mapped 2^16 times 64K apart.  When we detect that the return SS is
on the LDT, we copy the IRET frame to the ministack and use the
relevant alias to return to userspace.  The ministacks are mapped
readonly, so if IRET faults we promote #GP to #DF which is an IST
vector and thus has its own stack; we then do the fixup in the #DF
handler.

(Making #GP an IST exception would make the msr_safe functions unsafe
in NMI/MC context, and quite possibly have other effects.)

Special thanks to:

- Andy Lutomirski, for the suggestion of using very small stack slots
  and copy (as opposed to map) the IRET frame there, and for the
  suggestion to mark them readonly and let the fault promote to #DF.
- Konrad Wilk for paravirt fixup and testing.
- Borislav Petkov for testing help and useful comments.
Reported-by: NBrian Gerst <brgerst@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Lutomriski <amluto@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dirk Hohndel <dirk@hohndel.org>
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: comex <comexk@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # consider after upstream merge
      3891a04a
  27. 11 3月, 2014 1 次提交
  29. 07 3月, 2014 1 次提交
    • S
      x86: Keep thread_info on thread stack in x86_32 · 198d208d
      由 Steven Rostedt 提交于 
      x86_64 uses a per_cpu variable kernel_stack to always point to
the thread stack of current. This is where the thread_info is stored
and is accessed from this location even when the irq or exception stack
is in use. This removes the complexity of having to maintain the
thread info on the stack when interrupts are running and having to
copy the preempt_count and other fields to the interrupt stack.

x86_32 uses the old method of copying the thread_info from the thread
stack to the exception stack just before executing the exception.

Having the two different requires #ifdefs and also the x86_32 way
is a bit of a pain to maintain. By converting x86_32 to the same
method of x86_64, we can remove #ifdefs, clean up the x86_32 code
a little, and remove the overhead of the copy.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20110806012354.263834829@goodmis.org
Link: http://lkml.kernel.org/r/20140206144321.852942014@goodmis.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      198d208d
  31. 28 2月, 2014 1 次提交
  33. 09 2月, 2014 1 次提交
  35. 16 1月, 2014 1 次提交
    • P
      x86: Add check for number of available vectors before CPU down · da6139e4
      由 Prarit Bhargava 提交于 
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791

When a cpu is downed on a system, the irqs on the cpu are assigned to
other cpus.  It is possible, however, that when a cpu is downed there
aren't enough free vectors on the remaining cpus to account for the
vectors from the cpu that is being downed.

This results in an interesting "overflow" condition where irqs are
"assigned" to a CPU but are not handled.

For example, when downing cpus on a 1-64 logical processor system:

<snip>
[  232.021745] smpboot: CPU 61 is now offline
[  238.480275] smpboot: CPU 62 is now offline
[  245.991080] ------------[ cut here ]------------
[  245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250()
[  246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out
[  246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas
[  246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14
[  246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
[  246.057371]  0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48
[  246.065728]  ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040
[  246.074073]  0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000
[  246.082430] Call Trace:
[  246.085174]  <IRQ>  [<ffffffff8164fbf6>] dump_stack+0x46/0x58
[  246.091633]  [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0
[  246.098352]  [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50
[  246.104786]  [<ffffffff815710d6>] dev_watchdog+0x246/0x250
[  246.110923]  [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[  246.119097]  [<ffffffff8106092a>] call_timer_fn+0x3a/0x110
[  246.125224]  [<ffffffff8106280f>] ? update_process_times+0x6f/0x80
[  246.132137]  [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[  246.140308]  [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0
[  246.146933]  [<ffffffff81059a80>] __do_softirq+0xe0/0x220
[  246.152976]  [<ffffffff8165fedc>] call_softirq+0x1c/0x30
[  246.158920]  [<ffffffff810045f5>] do_softirq+0x55/0x90
[  246.164670]  [<ffffffff81059d35>] irq_exit+0xa5/0xb0
[  246.170227]  [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60
[  246.177324]  [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70
[  246.184041]  <EOI>  [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0
[  246.191559]  [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0
[  246.198374]  [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200
[  246.204900]  [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30
[  246.210846]  [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250
[  246.217371]  [<ffffffff81646b47>] rest_init+0x77/0x80
[  246.223028]  [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb
[  246.229165]  [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e
[  246.235787]  [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c
[  246.242990]  [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc
[  246.249610] ---[ end trace fb74fdef54d79039 ]---
[  246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout
[  246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter
Last login: Mon Nov 11 08:35:14 from 10.18.17.119
[root@(none) ~]# [  246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[  249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
[  246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[  249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX

(last lines keep repeating.  ixgbe driver is dead until module reload.)

If the downed cpu has more vectors than are free on the remaining cpus on the
system, it is possible that some vectors are "orphaned" even though they are
assigned to a cpu.  In this case, since the ixgbe driver had a watchdog, the
watchdog fired and notified that something was wrong.

This patch adds a function, check_vectors(), to compare the number of vectors
on the CPU going down and compares it to the number of vectors available on
the system.  If there aren't enough vectors for the CPU to go down, an
error is returned and propogated back to userspace.

v2: Do not need to look at percpu irqs
v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest
    Priority Mode
v4: Additional changes suggested by Gong Chen.
v5/v6/v7/v8: Updated comment text
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.comReviewed-by: NGong Chen <gong.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
      da6139e4
  37. 20 12月, 2013 1 次提交
  39. 01 10月, 2013 1 次提交
    • B
      x86/boot: Further compress CPUs bootup message · a17bce4d
      由 Borislav Petkov 提交于 
      Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a17bce4d
  41. 28 9月, 2013 1 次提交
    • B
      x86: Improve the printout of the SMP bootup CPU table · 646e29a1
      由 Borislav Petkov 提交于 
      As the new x86 CPU bootup printout format code maintainer, I am
taking immediate action to improve and clean (and thus indulge
my OCD) the reporting of the cores when coming up online.

Fix padding to a right-hand alignment, cleanup code and bind
reporting width to the max number of supported CPUs on the
system, like this:

 [    0.074509] smpboot: Booting Node   0, Processors:      #1  #2  #3  #4  #5  #6  #7 OK
 [    0.644008] smpboot: Booting Node   1, Processors:  #8  #9 #10 #11 #12 #13 #14 #15 OK
 [    1.245006] smpboot: Booting Node   2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK
 [    1.864005] smpboot: Booting Node   3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK
 [    2.489005] smpboot: Booting Node   4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK
 [    3.093005] smpboot: Booting Node   5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK
 [    3.698005] smpboot: Booting Node   6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK
 [    4.304005] smpboot: Booting Node   7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK
 [    4.961413] Brought up 64 CPUs

and this:

 [    0.072367] smpboot: Booting Node   0, Processors:    #1 #2 #3 #4 #5 #6 #7 OK
 [    0.686329] Brought up 8 CPUs
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Libin <huawei.libin@huawei.com>
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
      646e29a1
  43. 25 9月, 2013 1 次提交
  45. 05 9月, 2013 1 次提交
  47. 15 7月, 2013 1 次提交
    • P
      x86: delete __cpuinit usage from all x86 files · 148f9bb8
      由 Paul Gortmaker 提交于 
      The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      148f9bb8
  49. 31 5月, 2013 1 次提交
    • A
      sched/x86: Construct all sibling maps if smt · b0bc225d
      由 Andrew Jones 提交于 
      Commit 316ad248 ("sched/x86: Rewrite
set_cpu_sibling_map()") broke the construction of sibling maps,
which also broke the booted_cores accounting.

Before the rewrite, if smt was present, then each map was
updated for each smt sibling. After the rewrite only
cpu_sibling_mask gets updated, as the llc and core maps depend
on 'has_mc = x86_max_cores > 1' instead. This leads to problems
with topologies like the following

(qemu -smp sockets=2,cores=1,threads=2)

  processor       : 0
  physical id     : 0
  siblings        : 1    <= should be 2
  core id         : 0
  cpu cores       : 1

  processor       : 1
  physical id     : 0
  siblings        : 1    <= should be 2
  core id         : 0
  cpu cores       : 0    <= should be 1

  processor       : 2
  physical id     : 1
  siblings        : 1    <= should be 2
  core id         : 0
  cpu cores       : 1

  processor       : 3
  physical id     : 1
  siblings        : 1    <= should be 2
  core id         : 0
  cpu cores       : 0    <= should be 1

This patch restores the former construction by defining has_mc
as (has_smt || x86_max_cores > 1). This should be fine as there
were no (has_smt && !has_mc) conditions in the context.

Aso rename has_mc to has_mp now that it's not just for cores.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: a.p.zijlstra@chello.nl
Cc: fenghua.yu@intel.com
Link: http://lkml.kernel.org/r/1369831695-11970-1-git-send-email-drjones@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      b0bc225d
  51. 08 4月, 2013 1 次提交
  53. 06 3月, 2013 1 次提交
  55. 10 2月, 2013 1 次提交
    • L
      x86 idle: remove mwait_idle() and "idle=mwait" cmdline param · 69fb3676
      由 Len Brown 提交于 
      mwait_idle() is a C1-only idle loop intended to be more efficient
than HLT, starting on Pentium-4 HT-enabled processors.

But mwait_idle() has been replaced by the more general
mwait_idle_with_hints(), which handles both C1 and deeper C-states.
ACPI processor_idle and intel_idle use only mwait_idle_with_hints(),
and no longer use mwait_idle().

Here we simplify the x86 native idle code by removing mwait_idle(),
and the "idle=mwait" bootparam used to invoke it.

Since Linux 3.0 there has been a boot-time warning when "idle=mwait"
was invoked saying it would be removed in 2012.  This removal
was also noted in the (now removed:-) feature-removal-schedule.txt.

After this change, kernels configured with
(CONFIG_ACPI=n && CONFIG_INTEL_IDLE=n) when run on hardware
that supports MWAIT will simply use HLT.  If MWAIT is desired
on those systems, cpuidle and the cpuidle drivers above
can be enabled.
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: x86@kernel.org
      69fb3676
  57. 01 12月, 2012 1 次提交
    • V
      x86, fpu: Avoid FPU lazy restore after suspend · 644c1541
      由 Vincent Palatin 提交于 
      When a cpu enters S3 state, the FPU state is lost.
After resuming for S3, if we try to lazy restore the FPU for a process running
on the same CPU, this will result in a corrupted FPU context.

Ensure that "fpu_owner_task" is properly invalided when (re-)initializing a CPU,
so nobody will try to lazy restore a state which doesn't exist in the hardware.

Tested with a 64-bit kernel on a 4-core Ivybridge CPU with eagerfpu=off,
by doing thousands of suspend/resume cycles with 4 processes doing FPU
operations running. Without the patch, a process is killed after a
few hundreds cycles by a SIGFPE.

Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Olof Johansson <olofj@chromium.org>
Cc: <stable@kernel.org> v3.4+ # for 3.4 need to replace this_cpu_write by percpu_write
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Link: http://lkml.kernel.org/r/1354306532-1014-1-git-send-email-vpalatin@chromium.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      644c1541
  59. 15 11月, 2012 2 次提交
  61. 14 11月, 2012 1 次提交
  63. 23 8月, 2012 1 次提交
    • R
      x86/smp: Don't ever patch back to UP if we unplug cpus · 816afe4f
      由 Rusty Russell 提交于 
      We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time.  In particular, not if we
unplug CPUs to return to a single cpu.

Paul McKenney points out:

 mean offline overhead is 6251/48=130.2 milliseconds.

 If I remove the alternatives_smp_switch() from the offline
 path [...] the mean offline overhead is 550/42=13.1 milliseconds

Basically, we're never going to get those 120ms back, and the
code is pretty messy.

We get rid of:

 1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
    documentation is wrong. It's now the default.

 2) The skip_smp_alternatives flag used by suspend.

 3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
    which were only used to set this one flag.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paul.mckenney@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.auSigned-off-by: NIngo Molnar <mingo@kernel.org>
      816afe4f
  65. 14 6月, 2012 1 次提交
    • V
      x86: Add read_mostly declaration/definition to variables from smp.h · 0816b0f0
      由 Vlad Zolotarov 提交于 
      Add "read-mostly" qualifier to the following variables in
smp.h:

 - cpu_sibling_map
 - cpu_core_map
 - cpu_llc_shared_map
 - cpu_llc_id
 - cpu_number
 - x86_cpu_to_apicid
 - x86_bios_cpu_apicid
 - x86_cpu_to_logical_apicid

As long as all the variables above are only written during the
initialization, this change is meant to prevent the false
sharing. More specifically, on vSMP Foundation platform
x86_cpu_to_apicid shared the same internode_cache_line with
frequently written lapic_events.

From the analysis of the first 33 per_cpu variables out of 219
(memories they describe, to be more specific) the 8 have read_mostly
nature (tlb_vector_offset, cpu_loops_per_jiffy, xen_debug_irq, etc.)
and 25 are frequently written (irq_stack_union, gdt_page,
exception_stacks, idt_desc, etc.).

Assuming that the spread of the rest of the per_cpu variables is
similar, identifying the read mostly memories will make more sense
in terms of long-term code maintenance comparing to identifying
frequently written memories.
Signed-off-by: NVlad Zolotarov <vlad@scalemp.com>
Acked-by: NShai Fultheim <shai@scalemp.com>
Cc: Shai Fultheim (Shai@ScaleMP.com) <Shai@scalemp.com>
Cc: ido@wizery.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1719258.EYKzE4Zbq5@vladSigned-off-by: NIngo Molnar <mingo@kernel.org>
      0816b0f0
  67. 13 6月, 2012 1 次提交
    • B
      x86/smp: Fix topology checks on AMD MCM CPUs · 161270fc
      由 Borislav Petkov 提交于 
      The warning below triggers on AMD MCM packages because physical package
IDs on the cores of a _physical_ socket are the same. I.e., this field
says which CPUs belong to the same physical package.

However, the same two CPUs belong to two different internal, i.e.
"logical" nodes in the same physical socket which is reflected in the
CPU-to-node map on x86 with NUMA.

Which makes this check wrong on the above topologies so circumvent it.

[    0.444413] Booting Node   0, Processors  #1 #2 #3 #4 #5 Ok.
[    0.461388] ------------[ cut here ]------------
[    0.465997] WARNING: at arch/x86/kernel/smpboot.c:310 topology_sane.clone.1+0x6e/0x81()
[    0.473960] Hardware name: Dinar
[    0.477170] sched: CPU #6's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
[    0.486860] Booting Node   1, Processors  #6
[    0.491104] Modules linked in:
[    0.494141] Pid: 0, comm: swapper/6 Not tainted 3.4.0+ #1
[    0.499510] Call Trace:
[    0.501946]  [<ffffffff8144bf92>] ? topology_sane.clone.1+0x6e/0x81
[    0.508185]  [<ffffffff8102f1fc>] warn_slowpath_common+0x85/0x9d
[    0.514163]  [<ffffffff8102f2b7>] warn_slowpath_fmt+0x46/0x48
[    0.519881]  [<ffffffff8144bf92>] topology_sane.clone.1+0x6e/0x81
[    0.525943]  [<ffffffff8144c234>] set_cpu_sibling_map+0x251/0x371
[    0.532004]  [<ffffffff8144c4ee>] start_secondary+0x19a/0x218
[    0.537729] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.628197]  #7 #8 #9 #10 #11 Ok.
[    0.807108] Booting Node   3, Processors  #12 #13 #14 #15 #16 #17 Ok.
[    0.897587] Booting Node   2, Processors  #18 #19 #20 #21 #22 #23 Ok.
[    0.917443] Brought up 24 CPUs

We ran a topology sanity check test we have here on it and
it all looks ok... hopefully :).
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120529135442.GE29157@aftab.osrc.amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      161270fc