- 30 3月, 2012 1 次提交
-
-
由 Len Brown 提交于
The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax() - essentially it turned off the use of HLT. This workaround was commented in the code as: "disable hlt during certain critical i/o operations" "This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove." H. Peter Anvin additionally adds: "To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail. They were by far in the minority even back then." Alan Cox further says: "Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray. Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use." So, let's finally drop this. Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephen Hemminger <shemminger@vyatta.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org [ If anyone cares then alternative instruction patching could be used to replace HLT with a one-byte NOP instruction. Much simpler. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 3月, 2012 1 次提交
-
-
由 Cong Wang 提交于
Signed-off-by: NCong Wang <amwang@redhat.com>
-
- 17 3月, 2012 1 次提交
-
-
Deprecate this driver. All devices which can be handled by this driver can also be handled by the usb-storage driver. Acked-By: NPete Zaitcev <zaitcev@redhat.com> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 03 2月, 2012 1 次提交
-
-
Following removal announce and addition to feature-removal-schedule.txt, here is the actual source code deletion for Atmel CAP9 family. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 20 1月, 2012 1 次提交
-
-
由 Nicolas Ferre 提交于
Atmel CAP9 family is not maintained well and products may be difficult to find now. It will allow to save workforce and remove LOC during current cleanup process. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 16 1月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
As per the feature removal document, make the tuner type check more strict so that it is no longer possible to set the radio frequency through a video node or the TV frequency through a radio node. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 1月, 2012 1 次提交
-
-
由 Bjorn Helgaas 提交于
Users of pci_scan_bus_parented() should be converted to use either pci_scan_root_bus() (preferred, but also calls pci_bus_add_devices) or pci_create_root_bus() pci_scan_child_bus() Since pci_scan_bus_parented(), I'm marking it deprecated now and will actually remove it later. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 06 1月, 2012 4 次提交
-
-
由 Hans de Goede 提交于
The pwc driver claims to support any resolution between 160x120 and 640x480, but emulates this by simply drawing a black border around the image. Userspace can draw its own black border if it really wants one. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
This stems from the v4l1 era, with v4l2 everything can be done with standardized v4l2 API calls. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
The .priv field never was intended for this, setting a framerate is support using the standardized S_PARM ioctl. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Setting pan/tilt should be done with v4l2 controls, like with other cams. The button is available as a standard input device Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 12月, 2011 1 次提交
-
-
由 Chris Wright 提交于
The host side pv mmu support has been marked for feature removal in January 2011. It's not in use, is slower than shadow or hardware assisted paging, and a maintenance burden. It's November 2011, time to remove it. Signed-off-by: NChris Wright <chrisw@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 12 12月, 2011 1 次提交
-
-
由 Michal Nazarewicz 提交于
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: NMichal Nazarewicz <mina86@mina86.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 10 12月, 2011 1 次提交
-
-
由 Srivatsa S. Bhat 提交于
Several snapshot ioctls were marked for removal quite some time ago, since they were deprecated. Remove them. Suggested-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 08 12月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
This code has been on the list to remove for a long time, so disable it by default, add a warning to its Kconfig, and schedule it for removal in 3.5. The only known dependency, hal, has not required it since its 0.5.12 release, which was in early 2009 and hal has since been deprecated completely. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 11月, 2011 1 次提交
-
-
由 WANG Cong 提交于
When I tried to send a patch to remove it, Andi told me we still need to keep compabitlies for old libc, so we can't remove this completely. Then just make it default to n and remove the doc from feature-removal-schedule.txt. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 10月, 2011 1 次提交
-
-
由 Don Fry 提交于
Rename the iwlagn module as iwlwifi in preparation for future changes. Add an alias to iwlagn for backward compatibility. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 9月, 2011 1 次提交
-
-
由 Laurent Pinchart 提交于
The UVCIOC_CTRL_ADD, UVCIOC_CTRL_MAP_OLD, UVCIOC_CTRL_GET and UVCIOC_CTRL_SET ioctls are deprecated and were scheduled for removal for v2.6.42. As v2.6.42 == v3.2, remove them. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 06 8月, 2011 1 次提交
-
-
由 Lee, Chun-Yi 提交于
we can now autodetect internal 3G device and already have the threeg rfkill device. So, we plan to remove threeg sysfs support for it's no longer necessary. We also plan to remove interface sysfs file that exposed which ACPI-WMI interface that was used by acer-wmi driver. It will replaced by information log when acer-wmi initial. We keep it around for userspace compatibility reasons, schedule removal in 2012. Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Acked-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NLee, Chun-Yi <jlee@novell.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 03 8月, 2011 1 次提交
-
-
由 Jean Delvare 提交于
It's about time to revert 16d75239 ("thermal: Create CONFIG_THERMAL_HWMON=n"). Anybody running a kernel >= 2.6.40 would also be running a recent enough version of lm-sensors. Actually having CONFIG_THERMAL_HWMON is pretty convenient so instead of dropping it, we keep it but hide it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Rene Herman <rene.herman@gmail.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 7月, 2011 1 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 7月, 2011 1 次提交
-
-
由 WANG Cong 提交于
git grep shows there are no users in tree, so we can remove them safely. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2011 2 次提交
-
-
由 David Rientjes 提交于
The badness() function in the oom killer was renamed to oom_badness() in a63d83f4 ("oom: badness heuristic rewrite") since it is a globally exported function for clarity. The prototype for the old function still existed in linux/oom.h, so remove it. There are no existing users. Also fixes documentation and comment references to badness() and adjusts them accordingly. Signed-off-by: NDavid Rientjes <rientjes@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
In commit a2c8990a ("memsw: remove noswapaccount kernel parameter"), Michal forgot to remove some left pieces of noswapaccount in the tree, this patch removes them all. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 7月, 2011 1 次提交
-
-
由 NeilBrown 提交于
As promised in feature-removal-schedule.txt it is time to remove the nfsctl system call. Userspace has perferred to not use this call throughout 2.6 and it has been excluded in the default configuration since 2.6.36 (9 months ago). So this patch removes all the code that was being compiled out. There are still references to sys_nfsctl in various arch systemcall tables and related code. These should be cleaned out too, probably in the next merge window. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 08 7月, 2011 1 次提交
-
-
由 Hans Verkuil 提交于
Radio devices have weird side-effects when used with combined TV/radio tuners and the V4L2 spec is ambiguous on how it should work. This results in inconsistent driver behavior which makes life hard for everyone. Be more strict in when and how the switch between radio and tv mode takes place and make sure all drivers behave the same. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 7月, 2011 1 次提交
-
-
由 Michael Büsch 提交于
Signed-off-by: NMichael Buesch <m@bues.ch> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 6月, 2011 1 次提交
-
-
由 Américo Wang 提交于
It is scheduled to be removed. Acked-by: NAndres Salomon <dilinger@queued.net> Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 6月, 2011 1 次提交
-
-
由 Deepak Saxena 提交于
Update all future kernel version entries in feature-removal-schedule.txt with appropriate 3.x kernel numbering. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Reviewed-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 6月, 2011 2 次提交
-
-
Commit a77aea92 ("cgroup: remove the ns_cgroup") removed the ns_cgroup but it forgot to remove the related doc in feature-removal-schedule.txt. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Serge E. Hallyn <serge.hallyn@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Stern 提交于
This patch (as1471) deprecates the File-backed Storage Driver and schedules its replacement for the 3.8 kernel release (about two years from now). Users are advised to switch to the Mass Storage Gadget instead. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 5月, 2011 4 次提交
-
-
由 Len Brown 提交于
mwait_idle() is a C1-only idle loop intended to be more efficient than HLT on SMP hardware that supports it. But mwait_idle() has been replaced by the more general mwait_idle_with_hints(), which handles both C1 and deeper C-states. ACPI uses only mwait_idle_with_hints(), and never uses mwait_idle(). Deprecate mwait_idle() and the "idle=mwait" cmdline param to simplify the x86 idle code. After this change, kernels configured with (!CONFIG_ACPI=n && !CONFIG_INTEL_IDLE=n) when run on hardware that support MWAIT will simply use HLT. If MWAIT is desired on those systems, cpuidle and the cpuidle drivers above can be used. cc: x86@kernel.org cc: stable@kernel.org # .39.x Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
We'd rather that modern machines not check if HLT works on every entry into idle, for the benefit of machines that had marginal electricals 15-years ago. If those machines are still running the upstream kernel, they can use "idle=poll". The only difference will be that they'll now invoke HLT in machine_hlt(). cc: x86@kernel.org # .39.x Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
We don't want to export the pm_idle function pointer to modules. Currently CONFIG_APM_CPU_IDLE w/ CONFIG_APM_MODULE forces us to. CONFIG_APM_CPU_IDLE is of dubious value, it runs only on 32-bit uniprocessor laptops that are over 10 years old. It calls into the BIOS during idle, and is known to cause a number of machines to fail. Removing CONFIG_APM_CPU_IDLE and will allow us to stop exporting pm_idle. Any systems that were calling into the APM BIOS at run-time will simply use HLT instead. cc: x86@kernel.org cc: Jiri Kosina <jkosina@suse.cz> cc: stable@kernel.org # .39.x Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
Plan to remove floppy_disable_hlt in 2012, an ancient workaround with comments that it should be removed. This allows us to remove clutter and a run-time branch from the idle code. WARN_ONCE() on invocation until it is removed. cc: x86@kernel.org cc: stable@kernel.org # .39.x Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 24 5月, 2011 1 次提交
-
-
由 Amerigo Wang 提交于
It is obsoleted since Dec 2005. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NJoel Becker <jlbec@evilplan.org>
-
- 20 5月, 2011 2 次提交
-
-
由 Laurent Pinchart 提交于
Those ioctls are deprecated, list them in the features removal schedule for 2.6.42. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Amerigo Wang 提交于
cancel_rearming_delayed_work() and cancel_rearming_delayed_workqueue() can be removed now. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 18 5月, 2011 1 次提交
-
-
由 Amerigo Wang 提交于
acpi_sleep=s4_nonvs is superseded by acpi_sleep=nonvs, so remove it. Signed-off-by: NWANG Cong <amwang@redhat.com> Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NLen Brown <lenb@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-