Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 30 3月, 2012 2 次提交
    • L
      x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facility · f6365201
      由 Len Brown 提交于 
      The X86_32-only disable_hlt/enable_hlt mechanism was used by the
32-bit floppy driver. Its effect was to replace the use of the
HLT instruction inside default_idle() with cpu_relax() - essentially
it turned off the use of HLT.

This workaround was commented in the code as:

 "disable hlt during certain critical i/o operations"

 "This halt magic was a workaround for ancient floppy DMA
  wreckage. It should be safe to remove."

H. Peter Anvin additionally adds:

 "To the best of my knowledge, no-hlt only existed because of
  flaky power distributions on 386/486 systems which were sold to
  run DOS.  Since DOS did no power management of any kind,
  including HLT, the power draw was fairly uniform; when exposed
  to the much hhigher noise levels you got when Linux used HLT
  caused some of these systems to fail.

  They were by far in the minority even back then."

Alan Cox further says:

 "Also for the Cyrix 5510 which tended to go castors up if a HLT
  occurred during a DMA cycle and on a few other boxes HLT during
  DMA tended to go astray.

  Do we care ? I doubt it. The 5510 was pretty obscure, the 5520
  fixed it, the 5530 is probably the oldest still in any kind of
  use."

So, let's finally drop this.
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Stephen Hemminger <shemminger@vyatta.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org
[ If anyone cares then alternative instruction patching could be
  used to replace HLT with a one-byte NOP instruction. Much simpler. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      f6365201
    • G
      dt: Linux DT usage model documentation · 31134efc
      由 Grant Likely 提交于 
      v2: 2nd draft
 - Editorial cleanups (Randy Dunlap and Stephen Warren)
 - Added missing Microblaze reference (Stephen Neuendorffer)
 - Make example of platform_device creation clearer (Shawn Guo)
 - Expand on PowerPC history and mention i2c mess (David Gibson)
 - convert to plain text (remove bits of html formating)
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      31134efc
  3. 29 3月, 2012 9 次提交
  5. 28 3月, 2012 5 次提交
  7. 27 3月, 2012 1 次提交
  9. 26 3月, 2012 4 次提交
  11. 24 3月, 2012 5 次提交
  13. 23 3月, 2012 5 次提交
  15. 22 3月, 2012 4 次提交
    • B
      gpio/twl: Add DT support to gpio-twl4030 driver · b8589e2a
      由 Benoit Cousson 提交于 
      Add the DT support for the I2C GPIO expander inside the twl4030.

Note: The pdata parameters still have to be properly adapted using
dedicated bindings.
Signed-off-by: NBenoit Cousson <b-cousson@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
      b8589e2a
    • S
      procfs: mark thread stack correctly in proc/<pid>/maps · b7643757
      由 Siddhesh Poyarekar 提交于 
      Stack for a new thread is mapped by userspace code and passed via
sys_clone.  This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks.  This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.

For a multithreaded program like the following:

	#include <pthread.h>

	void *thread_main(void *foo)
	{
		while(1);
	}

	int main()
	{
		pthread_t t;
		pthread_create(&t, NULL, thread_main, NULL);
		pthread_join(t, NULL);
	}

proc/PID/maps looks like the following:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack.  Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.

With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack].  All other 'stack' vmas are marked as
anonymous memory.  /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].

So /proc/PID/maps will look like this:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack:1442]
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack.  The task level maps will
however like this:

    00400000-00401000 r-xp 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    00600000-00601000 rw-p 00000000 fd:0a 3671804                            /home/siddhesh/a.out
    019ef000-01a10000 rw-p 00000000 00:00 0                                  [heap]
    7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack]
    7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482                    /lib64/libc-2.14.90.so
    7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
    7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938                    /lib64/libpthread-2.14.90.so
    7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
    7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
    7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
    7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348                    /lib64/ld-2.14.90.so
    7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
    7fff627ff000-7fff62800000 r-xp 00000000 00:00 0                          [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0                  [vsyscall]

where only the vma that is being used as a stack by *that* task is
marked as [stack].

Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:

    [siddhesh@localhost ~ ]$ pgrep a.out
    1441
    [siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack:1442]
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
    7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
    7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0                          [stack]
    [siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
    7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
    7fff6273a000 default stack anon=3 dirty=3 N0=3
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
    7f8a44492000 default stack anon=2 dirty=2 N0=2
    [siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
    7fff6273a000 default stack anon=3 dirty=3 N0=3

[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: NSiddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b7643757
    • J
      thp: documentation: 'transparent_hugepage=' can also be specified on cmdline · fcf4d821
      由 Jiri Kosina 提交于 
      The behavior of THP can either be toggled through sysfs in runtime or
using a kernel cmdline parameter 'transparent_hugepage='.  Document the
latter in kernel-parameters.txt
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fcf4d821
    • N
      pagemap: document KPF_THP and make page-types aware of it · 807f0ccf
      由 Naoya Horiguchi 提交于 
      page-types, which is a common user of pagemap, gets aware of thp with this
patch.  This helps system admins and kernel hackers know about how thp
works.  Here is a sample output of page-types over a thp:

  $ page-types -p <pid> --raw --list

  voffset offset  len     flags
  ...
  7f9d40200       3f8400  1       ___U_lA____Ma_bH______t____________
  7f9d40201       3f8401  1ff     ________________T_____t____________

               flags      page-count       MB  symbolic-flags                     long-symbolic-flags
  0x0000000000410000             511        1  ________________T_____t____________        compound_tail,thp
  0x000000000040d868               1        0  ___U_lA____Ma_bH______t____________        uptodate,lru,active,mmap,anonymous,swapbacked,compound_head,thp
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      807f0ccf
  17. 21 3月, 2012 5 次提交
    • S
      pnfs-obj: autologin: Add support for protocol autologin · 18d98f6c
      由 Sachin Bhamare 提交于 
      The pnfs-objects protocol mandates that we autologin into devices not
present in the system, according to information specified in the
get_device_info returned from the server.

The Protocol specifies two login hints.
1. An IP address:port combination
2. A string URI which is constructed as a URL with a protocol prefix
   followed by :// and a string as address. For each  protocol prefix
   the string-address format might be different.

We only support the second option. The first option is just redundant
to the second one.
NOTE: The Kernel part of autologin does not parse the URI string. It
just channels it to a user-mode script. So any new login protocols should
only update the user-mode script which is a part of the nfs-utils package,
but the Kernel need not change.

We implement the autologin by using the call_usermodehelper() API.
(Thanks to Steve Dickson <steved@redhat.com> for pointing it out)
So there is no running daemon needed, and/or special setup.

We Add the osd_login_prog Kernel module parameters which defaults to:
	/sbin/osd_login

Kernel try's to upcall the program specified in osd_login_prog. If the file is
not found or the execution fails Kernel will disable any farther upcalls, by
zeroing out  osd_login_prog, Until Admin re-enables it by setting the
osd_login_prog parameter to a proper program.

Also add text about the osd_login program command line API to:
	Documentation/filesystems/nfs/pnfs.txt
and documentation of the new  osd_login_prog  module parameter to:
	Documentation/kernel-parameters.txt

TODO: Add timeout option in the case osd_login program gets
              stuck
Signed-off-by: NSachin Bhamare <sbhamare@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      18d98f6c
    • A
      debugfs-related mode_t whack-a-mole · 88187398
      由 Al Viro 提交于 
      all of those should be umode_t...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      88187398
    • M
      hfsplus: add an ioctl to bless files · a051f71c
      由 Matthew Garrett 提交于 
      Making an hfsplus partition bootable requires the ability to "bless" a
file by putting its inode number in the volume header. Doing this from
userspace on a mounted filesystem is impractical since the kernel will
write back the original values on unmount. Add an ioctl to allow userspace
to update the volume header information based on the target file.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      a051f71c
    • K
      fs: initial qnx6fs addition · 5d026c72
      由 Kai Bankett 提交于 
      Adds support for qnx6fs readonly support to the linux kernel.

* Mount option
  The option mmi_fs can be used to mount Harman Becker/Audi MMI 3G
  HDD qnx6fs filesystems.

* Documentation
  A high level filesystem stucture description can be found in the
  Documentation/filesystems directory. (qnx6.txt)

* Additional features
  - Active (stable) superblock selection
  - Superblock checksum check (enforced)
  - Supports mount of qnx6 filesystems with to host different endianess
  - Automatic endianess detection
  - Longfilename support (with non-enfocing crc check)
  - All blocksizes (512, 1024, 2048 and 4096 supported)
Signed-off-by: NKai Bankett <chaosman@ontika.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      5d026c72
    • A
      vfs: d_alloc_root() gone · 32991ab3
      由 Al Viro 提交于 
      all callers converted to d_make_root() by now
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      32991ab3